Essex · England
Fire-rated sealant in Latton, Essex
Professional fire rated sealant in and around Latton, with every bit of old sealant taken out first and a 12-month guarantee.
- Open holes round services passing through fire walls
- Fire stopping disturbed by later work
- Linear gaps at the head of walls
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
About our fire rated sealant in Latton
We don’t assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. Common call-outs are for fire stopping disturbed by later work and unsealed gaps around fire door frames, across plasterboard & masonry, service penetrations and pipe & cable gaps.
Work in a small place like Latton is planned ahead, journey included, so it can be fitted around guests, customers or events where possible.
Whatever the size of the job, it’s backed by our one-year guarantee in Latton and across Essex.
- Location
- Latton (CM17, CM18, CM20)
- Wider area
- Essex
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What we do, step by step
There isn’t much for you to do on the day. Show us the job and we’ll take it from there. The job generally takes anything from a few hours to several days, depending on how many gaps there are from start to finish. Somewhere like Latton needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products.
How to prepare
- Mention any sign-in or site rules at work premises
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know about parking restrictions
Get a quote
For fire rated sealant in Latton, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Related advice
FAQs for Latton
Do you cover smaller places like Latton?
Yes. Latton is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work for landlords with property near Harlow Town station?
Yes. We work for landlords and agents as well as homeowners. Just call 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear price.
Can I do it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Will you leave a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
Are you insured?
Yes. Mr Mastic is fully insured, and we have been doing sealant work for more than 20 years.
What fire rating will the seal have?
That is not something we state or certify. Your specification sets the requirement, and we fit a product whose tested details meet it with a record of each location.
Can you tell me which gaps need fire stopping?
No, we don’t assess buildings. When your assessor or designer has set out what’s needed, we’ll quote for the sealant work on it.
Do you offer different sealant colours?
Yes. White, clear and grey are common, and other colours are available for many products, and we will agree it with you first.
When to call us in Latton
In some buildings the gap was filled with the wrong thing in the first place: general-purpose foam, everyday silicone or caulk where a fire-rated seal was needed. It may look fine, but it is not a fire-rated seal.
Common reasons people contact us include:
- Ordinary sealant used where a fire-rated product was needed
- Sealant items on a fire risk assessment action list
- Damaged fire sealant left by other trades
- Unsealed gaps where pipes and cables go through a wall
Community buildings like Church of St Andrew are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
What your quote should include
- Whether they’re fully insured
- Whether VAT is included
- What guarantee comes with the work
- How the joint is cleaned and prepared
Workplaces and buildings in Latton
Harlow, which Latton is part of, is one of England’s post-war new towns. Harlow was planned with its own industrial and business areas, so workplaces sit close to the homes. Each has washrooms, kitchens and fire-rated joints to keep in order. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
For site and facilities teams at buildings such as Church Langley Community Primary School, fire-stopping around service openings should be restored whenever new services go in. If you let a flat or house near Harlow Town station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Latton is about 1 mile south-east of Harlow, in Essex. From the centre of Latton to the outskirts, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Latton is one of 644 towns and villages in Essex we cover. There’s also a page for Chelmsford, roughly 16 miles from Latton.
All of CM17, CM18 and CM20 is within our area for fire rated sealant. That includes homes and businesses on London Road, Minton Lane and Tumbler Road. Being close to the A414, Latton is easy for our applicators to reach for fire rated sealant. Other places close to Latton include Harlow (1 mile north-west), Mark Hall South (1 mile north-west), Newhall (1 mile north-east), Bush Fair (1 mile south-west) and Netteswell (1 mile north-west). Further out, we also cover Brentwood (12 miles south-east), Loughton (8 miles south), Waltham Abbey (7 miles south-west), Great Dunmow (13 miles north-east), Epping (5 miles south) and Stansted Mountfitchet (10 miles north).
Landmarks near Latton
We work in homes and buildings around Passmores Academy, Harlow Marsh and Purple Emperor pub, among other places. For rail, the closest station is Harlow Town station, roughly 1.7 miles north-west. Nearby you’ll also find Princess Alexandra Hospital (1.7 miles west) and Mark Hall Cycle Museum (0.9 miles north). For a walk, there’s Hunsdon Mead.
Different surfaces, different methods
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. The sealant is chosen for what passes through and how wide the gap is.
Flats and HMOs
Converted houses often have gaps around old and new services. We seal the ones on your specification with a tested product and record where they are.
Towns and villages near Latton
More services for Latton
Why act early in Latton
Fire-rated sealants are less forgiving than ordinary ones. How it’s installed changes how it performs, and we work to the product details every time. Around Latton, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You’ll have a clear quote before any work starts, so you know where you stand.
Why choose Mr Mastic in Latton
- Approved under the ARBOMaster scheme
- Tidy, careful work
- Over 20 years’ experience
- Fully insured
Read what affects the cost or what customers say.
Looking after it afterwards
So the new joints stay in good condition:
- Keep the record of products and locations with your fire safety documents
- Make resealing part of every contractor’s brief
- Report cracked or damaged seals as soon as you notice them
- Include hidden areas like risers in routine checks
Any fire seal that is cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
When it isn’t the sealant
Sealant isn’t the answer to every problem, and we’ll tell you before work begins. Sealant will not put right:
- Problems with the door itself rather than the gap around the frame
- A wall that isn’t a fire-resisting element to begin with
- Fire risk assessments, which need a qualified assessor
If in doubt, ring 0345 464 0079 or email us and we’ll say what we think before booking.
What we seal
- Flats & HMOs
- Pipe & cable gaps
- Linear gaps
- Door frames
- Service penetrations
- Plasterboard & masonry