Essex · England
Epping Fire Rated Sealant
Fire rated sealant for Epping and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Gaps flagged on a fire risk assessment
- Open gaps behind door architraves
- Ordinary sealant used where a fire-rated product was needed
About our fire rated sealant in Epping
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. Common call-outs are for gaps filled with a product that isn’t fire-rated and old fire sealant that has split or come away, on service penetrations, linear gaps and flats & HMOs.
Around a place like Epping, halls, schools and small businesses all have washrooms and kitchens used by many people. Sealant and fire-rated joints there matter as much as in any larger building.
Whatever the size of the job, you get the same 12-month guarantee.
- Where
- Epping (CM16)
- Wider area
- Essex
- Guarantee
- One year on every job
- Quote
- A clear price before work begins
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Honest limits
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- A wall that is not a fire-resisting element to begin with
- Fire doors that need new seals, closers or hardware
- Sign-off of the building, which sits with building control or your assessor
Not sure which it is? You can call 0345 464 0079 or send us an email and we’ll tell you honestly.
Surfaces we seal
- Plasterboard & masonry
- Door frames
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
- Linear gaps
Workplaces and buildings in Epping
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details. Epping has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
If you look after a church, hall or community building such as Church of St John the Baptist, older buildings that have had new heating or wiring often have service gaps worth checking.
Epping is about 4 miles north-east of Loughton, in Essex. Every kind of property in Epping is covered for fire rated sealant, old or new, large or small. The work is guaranteed for a year. Our Essex coverage runs to 644 places, and Epping is one of them. You can also see our page for London, roughly 16 miles from Epping.
Jobs for fire rated sealant in CM16 works the same way as everywhere else we cover. That includes homes and businesses on High Street, Station Road and Twankhams Alley. Epping sits on or near the B181 and B182, which makes travel easy. Other places close to Epping include Ivy Chimneys (1 mile south-west), Steward's Green (1 mile south-east), Fiddlers Hamlet (1 mile south-east), Theydon Garnon (2 miles south) and Hobbs Cross (2 miles south-east). Further out, we also cover Harlow (5 miles north), Brentwood (10 miles south-east), Billericay (14 miles east), Loughton (4 miles south-west), Waltham Abbey (4 miles west) and Stansted Mountfitchet (15 miles north).
Near you in Epping
Around Epping, our work takes us to homes and buildings near St John's Church of England Voluntary Controlled School, Thornwood Common Flood Meadow and The Black Lion pub, among other places. A little further out are Epping Signalling Museum (less than half a mile south) and St. Margaret's Hospital (0.7 miles north-east). For a walk, there’s Gernon Bushes.
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Include fire stopping when you schedule refits
- Check risers, ceiling voids and cupboards during building checks
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Photograph sealed gaps before they’re covered up
Any fire seal that’s cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
Small gaps around services are simple to deal with while there are only a few. Leave them and each new job adds another hole and the job gets bigger.
Quotes for fire rated sealant in Epping
There’s no set price list. What we look at:
- Mould in or behind the old joints
- The amount of work
- The old material and how stubborn it is
- Access and height
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.
Asking for a quote
When you contact us, it’s useful to know:
- Pictures of the joints, sent by email
- Roughly how big the job is
- The type of property
- Where the job is, and your postcode
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. When it suits you, phone 0345 464 0079 or drop us an email.
Your questions about fire rated sealant in Epping
Can you do fire rated sealant in Epping?
Yes, Epping is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or drop us an email and tell us what needs doing, and we’ll give you a clear price.
Do you take on hotel work around Epping?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Can new sealant go over the old?
No. New silicone won’t bond to old silicone, and anything trapped underneath, including mould and water, stays there. It all has to come out first.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
Is intumescent sealant the same as fire-rated sealant?
Intumescent describes a material that swells in heat. Intumescent sealants are a type of fire-rated sealant and which one is used depends on the job.
Do you remove the old sealant?
Yes. We cut out all the old sealant and clean the joint before resealing.
Can you do several jobs on one visit?
Yes, we can. Several rooms, windows or areas can go on one quote.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Can I do it myself?
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Why act early in Epping
Fire-rated sealants are less forgiving than ordinary ones. How it’s installed changes how it performs, so we follow the maker’s details on every gap. Around Epping, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all make a difference.
What you get with us
- We’re fully insured
- Over 20 years’ experience
- Old sealant always removed completely
- Domestic, commercial and hotel work
Read our cost guide and what customers say.
Signs you need fire rated sealant in Epping
Sealant applied too thin, without the backing its detail needs, or onto dust will not perform as it was tested. We see plenty of fire stopping that was hurried, especially where it was squeezed in at the end of a project.
People usually contact us when they notice one of these:
- Gaps around pipes and cables through fire-resisting walls
- Fire seals that have cracked with movement
- Linear gaps at the head of walls
- Open gaps behind door architraves
If you look after a building such as Epping Primary School, fire-stopping around service openings should be restored whenever new services go in.
Before you book anyone
- How much experience the applicator has
- How long to leave it before use
- How hidden problems are handled
- Whether they’re fully insured
The process
Every visit runs the same way: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and tidy away. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. Parking around Epping is generally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any water getting in
- Tell us if parking is tricky
Getting a quote
Need a quote? Please phone 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.