West Berkshire · England
Inkpen Common Fire Rated Sealant
Fire rated sealant for Inkpen Common and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Unsealed gaps around fire door frames
- Gaps flagged on a fire risk assessment
- Holes left by a change of layout
Fire rated sealant in Inkpen Common
Deciding which gaps need fire stopping isn’t our role; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. If you’re dealing with unsealed gaps around fire door frames and seals cut through by electricians, plumbers or data installers, we can put it right, on pipe & cable gaps, service penetrations and door frames alike.
If you have holiday lets, a converted barn used for business or a community building near Inkpen Common, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
Whatever the size of the job, you get the same 12-month guarantee.
- Place
- Inkpen Common (RG17, RG20)
- Wider area
- West Berkshire
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What the job involves on each surface
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each.
Flats and HMOs
Conversions normally leave a mix of old and new service holes. We seal the ones on your specification with a tested product and record where they are.
When it is not the sealant
Honest advice matters more to us than a booking, so here’s what new sealant will not do:
- Doors that are not fire doors in the first place
- Deciding what fire stopping a building needs
- Sign-off of the building, which sits with building control or your assessor
If in doubt, call 0345 464 0079 or email us and we’ll say what we think before booking.
Where we work in Inkpen Common
- Service penetrations
- Linear gaps
- Pipe & cable gaps
- Door frames
- Plasterboard & masonry
- Flats & HMOs
Common questions in Inkpen Common
Do you work for landlords with property near Kintbury station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or email us and tell us about the property, and we will give you a clear quote.
Can you do fire rated sealant in Inkpen Common?
Yes, Inkpen Common is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we’ll send you a clear quote.
Do I have to be there?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Will you leave a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
Is intumescent sealant the same as fire-rated sealant?
Fire-rated is the broad term for sealants tested for fire stopping. Intumescent types expand when heated, and they’re one of the options. The specification and the tested detail decide which is used.
What sealant do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What do you need from me for a quote?
The location, the problem and the rough size of the job. Photos by email help too.
What fire rated sealant looks like in Inkpen Common
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
For site and facilities teams at buildings such as Inkpen Primary School, service openings in fire-resisting walls need checking after any refurbishment. For buildings such as Church of St Laurence, older buildings that have had new heating or wiring often have service gaps worth checking.
Inkpen Common is about 6 miles west of Newbury, in West Berkshire. Inkpen Common gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Inkpen Common is one of 155 towns and villages in West Berkshire where we work for fire rated sealant. Reading is on our list too, around 21 miles away.
Every address in RG17 and RG20 is within our area for fire rated sealant. That includes homes and businesses on Heads Lane, Rooksnest Lane and The Firs and the roads around them. Other places close to Inkpen Common include Hell Corner (1 mile east), Inkpen (1 mile north-west), Upper Green (1 mile south-west), Lower Green (1 mile west) and Kintbury (2 miles north). We also work in nearby towns such as Newbury (6 miles east), Thatcham (9 miles east), Speenhamland (6 miles east), Hungerford (4 miles north-west), Lambourn (10 miles north) and Shaw (7 miles east).
What’s near Inkpen Common
We work in homes and buildings around Crown and Garter pub. The nearest railway station is Kintbury station, roughly 2 miles north of the centre. Other landmarks nearby include Hamstead Marshall 3 (3.1 miles north-east). The countryside around Inkpen Common includes Kintbury Newt Ponds and Inkpen Hill.
Nearby places to Inkpen Common
What else we do in Inkpen Common
What happens if it’s left?
Doing it once, properly, beats doing it twice. If the details weren’t followed, the seal may need redoing once someone inspects it. Around Inkpen Common, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Why us?
- Homes, businesses and hotels
- We never seal over old sealant
- We leave the area clean and tidy
- 20+ years of sealant experience
Read what affects the cost or what customers say.
For landlords and businesses
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll give you a quote.
We also work for property managers and facilities teams. Several sites can be quoted together.
What affects the cost of fire rated sealant
Call for a quick quote. The main things that affect it are:
- Access and height
- The type of sealant required
- How much there is to do
- How many rooms, windows or areas are involved
Doing several joints on one visit generally makes better use of the time than several visits, so tell us about everything that needs sealing. We’ll give you a clear price for the lot.
Asking for a quote
When you contact us, it’s useful to know:
- The type of property
- Roughly how big the job is
- Where the property is
- Pictures of the joints, sent by email
Every job is quoted individually. Simply ring 0345 464 0079 or drop us an email and describe the job and send photos if you have them.
When to call us in Inkpen Common
Much fire stopping is hidden: above ceilings, inside risers and behind panels. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
Common reasons people contact us are:
- Old fire sealant that has split or come away
- Sealant items on a fire risk assessment action list
- Gaps filled with a product that is not fire-rated
- Damaged fire sealant left by other trades
For landlords with property near Kintbury station, any gap left by new services in shared walls should be closed with a fire-rated product.
Questions to ask before you book
- Whether the sealant suits the joint
- How much experience the applicator has
- Is VAT in the price?
- What preparation is included
The process
You don’t need to clear the whole room or building, only the area right around the joints. We protect the rest, and the job takes a few hours for a handful of gaps, and longer for a whole building for a typical job. Somewhere as small as Inkpen Common, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your files.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us about any previous sealing or DIY attempts
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
Want a quote for fire rated sealant? Please phone 0345 464 0079 or drop us an email with a few details. We’ll explain what we’d do and give you a clear quote before work begins.