West Berkshire · England
Fire-rated sealant in Lambourn, West Berkshire
Professional fire rated sealant in and around Lambourn, with every bit of old sealant taken out first.
- Linear gaps at the head of walls
- Cracked or shrunken fire-rated sealant
- Damaged fire sealant left by other trades
Lambourn: your questions answered
Is fire rated sealant in Lambourn guaranteed?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Do you cover smaller places like Lambourn?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
How do I get a quote for fire rated sealant in Lambourn?
Size, access and the old material all affect the cost. Call for a quick quote and we will talk you through it.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Will we have a record of what was sealed?
Yes. When the job is done, we give you the locations and products. If you need pictures or a set layout, ask when you get a quote.
Is it messy?
No. The area is protected while we work and cleaned up afterwards.
Do you carry out fire risk assessments?
No. We follow the requirements from your assessor, designer or building control and install to the manufacturer’s details.
Do you have insurance?
Yes. Full insurance covers our work.
Fire rated sealant in Lambourn
Bigger jobs can be worked through in stages, flat by flat or floor by floor, noting the locations and products as we go. It gives you a list to keep with the building’s fire safety documents. If you are dealing with linear gaps at the head of walls and cracked or shrunken fire-rated sealant, we can put it right, on door frames, linear gaps and service penetrations alike.
In a smaller place like Lambourn, commercial jobs tend to be smaller buildings: a pub, a surgery, a school, a shop or a few business units. The work is the same as in a big building, just on a smaller scale.
We stand behind the work with a one-year guarantee, so you are covered after we have gone.
- Location
- Lambourn (RG17)
- Region
- West Berkshire
- Guarantee
- A year, on every job
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Landlords, agents and businesses in Lambourn
If you manage several properties in or around Lambourn, jobs at different addresses can be quoted together. Send us the addresses and the work at each, and pictures by email help.
Housing providers, facilities teams and property managers book us too. Several sites can be quoted together.
What we do, step by step
The work is kept neat and contained to the area we’re working on. The job generally takes a few hours for a handful of gaps, and longer for a whole building, and we explain the cure time before we leave. Parking around Lambourn is generally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your records.
Preparing for the visit
- Tell us about any water getting in
- Mention if the joints have been sealed before
- Try not to wet indoor joints just before the visit
Ask for a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or send us an email.
Advice
When it isn’t the sealant
In fairness, some problems need a different trade:
- Large holes that need a different fire-stopping system
- A wall that isn’t a fire-resisting element to begin with
- Doors that are not fire doors in the first place
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
Where we work in Lambourn
- Plasterboard & masonry
- Flats & HMOs
- Door frames
- Service penetrations
- Pipe & cable gaps
- Linear gaps
Also near Lambourn
Other services in Lambourn
Quotes for fire rated sealant in Lambourn
Your quote is based on your job. We look at:
- Mould in or behind the old joints
- The number and length of the joints
- Whether old sealant or filler has to be cut out
- The type of sealant required
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Helping us quote
Before you ask for a quote, have a think about:
- The rough size of the job
- A few photos by email, if you can
- The problem you’ve noticed
- If someone has resealed it before
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, ring 0345 464 0079 or email us.
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Leave it or put it right?
An open gap in a fire-resisting wall is a route for smoke and fire. Sealing it properly restores what the wall was there to do, and the work involved is often modest. Homes in smaller places like Lambourn can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
Why Lambourn clients choose us
- We leave the area clean and tidy
- ARBOMaster approved applicator
- Rated 4.9 stars on Google
- Homes, businesses and hotels
Read our cost guide and what customers say.
Fire rated sealant around Lambourn
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
If you look after a church, hall or community building such as Church of St Michael and All Angels, older buildings that have had new heating or wiring often have service gaps worth checking. Managing a site like Lambourn CofE Primary School? Then fire-stopping around service openings should be restored whenever new services go in.
Lambourn is about 7 miles south-west of Wantage, in West Berkshire. Homes, rented property, offices and hotels in Lambourn can book us for fire rated sealant. Every job comes with our 12-month guarantee. Lambourn is one of 155 places in West Berkshire where we work. You can also see our page for Oxford, about 21 miles away.
Every address in RG17 is within our area for fire rated sealant, from the main roads to the quietest streets. Whether your property is on High Street, Station Road and Chapel Lane or anywhere close by, we can help. We also cover the places around Lambourn: Sheepdrove (1 mile north-east), Upper Lambourn (1 mile north-west), Westcot (6 miles north), Sparsholt (6 miles north) and Kingston Lisle (6 miles north). Larger places within reach include Newbury (12 miles south-east), Thatcham (14 miles south-east), Speenhamland (11 miles south-east), Hungerford (7 miles south), Shaw (12 miles south-east) and Wash Common (12 miles south-east). Being one of West Berkshire’s larger places, Lambourn has every kind of property, from flats to offices.
What’s near Lambourn
Locally, jobs take us to homes and businesses close to The George pub and the streets around them. Not far away are Watts Bank and Rams Hill.
Different surfaces, different methods
Plasterboard walls
Plasterboard partitions are common in flats, offices and conversions. We use a product tested in that kind of wall for the gap we’re sealing.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.