Surrey · England
Holt Pound Fire Rated Sealant
Our applicators work in Holt Pound on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Gaps flagged on a fire risk assessment
- Gaps left after a refit or conversion
- Open holes round services passing through fire walls
Honest limits
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant will not put right:
- Large holes that need a different fire-stopping system
- Walls or floors that weren’t built to resist fire
- Doors that aren’t fire doors in the first place
If in doubt, call 0345 464 0079 or email us and we’ll say what we think before you book.
What we seal
- Pipe & cable gaps
- Linear gaps
- Flats & HMOs
- Service penetrations
- Door frames
- Plasterboard & masonry
Fire rated sealant for homes and businesses in Holt Pound
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. If you’re dealing with ordinary sealant used where a fire-rated product was needed and fire seals that have cracked with movement, we can help, whatever the surface.
For holiday lets, converted business premises or a community building near Holt Pound, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Every job is covered by our one-year guarantee.
- Place
- Holt Pound (GU10)
- Region
- Surrey
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Commercial buildings in Holt Pound
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a church, hall or community building such as Saint James, older buildings that have had new heating or wiring often have service gaps worth checking. For site and facilities teams at buildings such as Rowledge Church of England Controlled Primary School, service openings in fire-resisting walls need checking after any refurbishment.
Holt Pound is about 2 miles south-west of Farnham, in Surrey. Jobs in Holt Pound get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Holt Pound is one of 395 towns and villages in Surrey we cover for fire rated sealant. There’s also a page for Reading, roughly 19 miles from Holt Pound.
We cover every part of GU10 for fire rated sealant. You’ll find streets such as Fullers Road and The Wickets, and we cover them all. We also cover Rowledge (1 mile east), Wrecclesham (1 mile north-east), Boundstone (1 mile east), Bucks Horn Oak (1 mile south-west) and Shortheath (1 mile north-east). Within a short drive, we also cover Guildford (12 miles east), Woking (14 miles north-east), Camberley (11 miles north-east), Frimley (10 miles north-east), Haslemere (8 miles south-east) and Ash (6 miles north-east).
Around Holt Pound
Around Holt Pound, our work takes us to homes and buildings near Weydon School, Weydon School and Underdown nature reserve. The nearest railway station is Bentley (Hampshire) station, roughly 1.5 miles west of the centre. Nearby you will also find Powderham Castle (2.2 miles north) and Chase Community Hospital (5.6 miles south). Open spaces near Holt Pound include Farnham Heath and Beacon Hill.
Towns and villages near Holt Pound
More services for Holt Pound
Holt Pound: your questions answered
Do you work for landlords with property near Bentley (Hampshire) station?
Yes. We work for landlords and agents as well as householders. You can call 0345 464 0079 or email us with the details for a clear quote.
Is Holt Pound in your area for fire rated sealant?
Yes. Our work covers London and the South East, and Holt Pound is part of that. Just ring 0345 464 0079 or email us with a few details of the job.
What fire rating will the seal have?
We do not issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer, and we install to them.
Is it OK to seal over old sealant?
No. Fresh sealant doesn’t stick to old sealant, and it traps any mould or water underneath. It all has to come out first.
How long does fire rated sealant take?
A typical job takes a few hours for a handful of gaps, and longer for a whole building, including the preparation. Your quote will say how long we expect yours to take.
Can I do it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
Will we have a record of what was sealed?
Yes. Locations and products are written up when we finish. If you need pictures or a set layout, ask when you get a quote.
Do you take on fire stopping in schools and offices?
Yes. Occupied flats, HMOs, offices and schools are all fine. Early starts or out-of-hours work can be arranged if that suits the building.
When to call us in Holt Pound
Over time, buildings change layout and use. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
It’s worth asking for a quote if you see:
- Standard silicone or caulk in a fire-stopping gap
- Open joints along the top of partitions
- New service routes left unsealed after building work
- Cracked or shrunken fire-rated sealant
Rented homes near Bentley (Hampshire) station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
What your quote should include
- Whether all the old sealant comes out first
- What preparation is included
- How long to leave it before use
- What insurance they hold
How we quote for fire rated sealant
There’s no set price list, because jobs vary so much. The quote depends on:
- How many rooms, windows or areas are involved
- The old material and how stubborn it is
- The type of sealant required
- Whether the work is at height
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or email us and we’ll talk you through it.
Helping us quote
To help us quote quickly, please include:
- Pictures of the joints, sent by email
- Any previous sealing or DIY work
- Roughly how big the job is
- How we’d reach the joints
If you are in Holt Pound and need fire rated sealant, phone 0345 464 0079 or send us an email. Tell us what the problem is and where, and we will agree the price before any work begins.
Landlords, agents and businesses in Holt Pound
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. We suggest:
- Ask every contractor to reseal any fire stopping they disturb
- Allow for resealing whenever new services are run
- Don’t paint over fire sealant until it has cured
- Keep the record of products and locations with your fire safety documents
Do not drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
The process
Good joint work is mostly preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for a handful of gaps, and longer for a whole building. In a small place like Holt Pound, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- We remove any old or unsuitable filler and clean the gap.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
Before we arrive
- Mention any sign-in or site rules at work premises
- For indoor joints, keep the area dry beforehand if you can
- Move anything stored near the joints
Getting a quote
We do not publish a price list. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or drop us an email.
Related advice
DIY versus a professional finish
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.