Kent · England
Fire Rated Sealant in Hinxhill Park
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Hinxhill Park and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- Open holes round services passing through fire walls
- Gaps left after a refit or conversion
- Linear gaps at the head of walls
What we cannot put right
We will not take on work that will not last, so these are the limits:
- Big openings where sealant alone isn’t the tested solution
- Fire doors that need new seals, closers or hardware
- Fire risk assessments, which need a qualified assessor
If you’re not sure, just call 0345 464 0079 or email us and we will give you a straight answer before booking.
Joints and surfaces we work on
- Flats & HMOs
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
- Linear gaps
- Service penetrations
Fire rated sealant in Hinxhill Park
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. We work on linear gaps, pipe & cable gaps and plasterboard & masonry, and common reasons people get in touch are gaps around pipes and cables through fire-resisting walls and fire stopping disturbed by later work.
If you have holiday lets, a converted barn used for business or a community building near Hinxhill Park, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
You’re covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or send us an email.
- Where
- Hinxhill Park (TN24)
- Wider area
- Kent
- Guarantee
- One year on every job
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What affects the cost of fire rated sealant
We don’t publish a price list, because no two jobs are the same. What we look at:
- Any working-time requirements on site
- The number and length of the joints
- How much old sealant there is and how hard it is to remove
- How easy the joints are to reach
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
What to tell us for a quote
Photos by email are helpful but not essential. Try to tell us:
- Access, such as stairs, a lift or height
- If someone has resealed it before
- How many joints, rooms or windows are involved
- The address or postcode of the job
For a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.
Why act early in Hinxhill Park
For some gaps, sealant isn’t the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. If a gap isn’t suitable for sealant, we will tell you. Older cottages and farmhouses around Hinxhill Park can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Why us?
- 20+ years of sealant experience
- Domestic, commercial and hotel work
- Neat joints and a tidy finish
- Every job guaranteed for a year
Take a look at what affects the cost or what customers say.
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Fire rated sealant in Hinxhill Park: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a building such as Willesborough Infant School, gaps opened by contractors for new cabling are a common finding in schools and offices. If you let a flat or house near Ashford International station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Community buildings like Church of St Mary are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Hinxhill Park is about 2 miles east of Ashford, in Kent. We provide fire rated sealant to householders, landlords and businesses in Hinxhill Park and the surrounding area. Our Kent coverage runs to 922 places, and Hinxhill Park is one of them. You can also see our page for Chelmsford, roughly 45 miles from Hinxhill Park.
Jobs for fire rated sealant in TN24 works the same way as everywhere else we cover. That includes homes and businesses on Honeysuckle Avenue, Stitchworth Lane and Mallow Road and the roads around them. Other places close to Hinxhill Park include Hinxhill (1 mile north-east), Sevington (1 mile south-west), Mersham (2 miles south), Ridgeway (2 miles south-east) and South Stour (2 miles south). Within a short drive, we also cover Canterbury (12 miles north-east), Folkestone (11 miles east), Faversham (12 miles north), Hythe (8 miles south-east), Davington (13 miles north) and Preston (12 miles north).
Local landmarks in Hinxhill Park
Around Hinxhill Park, our work takes us to homes and buildings near The Norton Knatchbull School, Conningbrook Lakes Country Park and The Blacksmith's Arms Public House and the streets around them. The closest station to Hinxhill Park is Ashford International station, roughly 1.9 miles west of the centre. Other landmarks nearby include William Harvey Hospital (within half a mile north-west) and Ashford Designer Outlet (1.8 miles west). For a walk, there’s Hatch Park.
More services for Hinxhill Park
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Tell trades working in the building that fire seals must be put back
- Check risers, ceiling voids and cupboards during building checks
- Keep the record of products and locations with your fire safety documents
- Do not paint over fire sealant until it has cured
Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.
A flagged gap shouldn’t wait for the next assessment. Have it sealed, then keep the record.
How the job changes by surface
Door frames
A door can only do its job if the gap behind its frame is sealed too. We fill it with a fire-rated product suited to the materials either side.
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. We seal it with a product tested for that service and gap size.
Hinxhill Park questions
Can you do fire rated sealant in Hinxhill Park?
Yes. Our work covers London and the South East, and Hinxhill Park is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.
Can you help a landlord with a rental near Ashford International station?
Yes, we work for landlords and letting agents. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear quote.
Where are you based?
We’re a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
Do you provide details of the products used?
Yes. We note each location and the product that went in so it’s there for the next inspection.
Can I use normal mastic around a pipe through a fire wall?
No. It looks sealed but won’t perform as fire stopping. Use a product tested for that gap and service.
Do you carry out fire risk assessments?
No. We follow the requirements from your assessor, designer or building control, and apply each product to its tested details.
Do you work in flats, HMOs and commercial buildings?
Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Let us know the building’s hours and we’ll plan the work to suit.
How the visit works
Every visit runs the same way: we look at the joints together, protect the area around them, do the work and tidy away. Most jobs take anything from a few hours to several days, depending on how many gaps there are. For a village or hamlet like Hinxhill Park, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Plan for the work area to be out of bounds to pets and children
- For business premises, tell us about site rules or sign-in
Ask for a quote
We don’t publish a price list. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or send us an email.