Surrey · England
Fire Rated Sealant in Heathrow
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Heathrow. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Open holes round services passing through fire walls
- Damaged fire sealant left by other trades
- Gaps where walls meet ceilings or slabs
About our fire rated sealant in Heathrow
A fire seal relies on being installed the way it was tested: the right depth, the right backing and the right product for the substrate. That detail is what we take care over, one gap at a time. We are often asked to deal with open joints along the top of partitions and open holes round services passing through fire walls, across plasterboard & masonry, pipe & cable gaps and door frames.
If you have holiday lets, a converted barn used for business or a community building near Heathrow, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
Each job carries a 12-month guarantee.
- Where
- Heathrow (TW6)
- Wider area
- Surrey
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
How it works
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the job takes a few hours for a handful of gaps, and longer for a whole building in most cases. For a village or hamlet like Heathrow, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Getting ready for the visit
- Tell us if parking is tricky
- Plan for the work area to be out of bounds to pets and children
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
Every job is quoted individually, so start by telling us what you need. Simply call 0345 464 0079 or drop us an email and describe the job, and pictures are welcome.
Related advice
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
What happens if it’s left?
An unsealed gap lets smoke and fire get round a wall that was built to hold them back. Sealing it properly restores what the wall was there to do, and the sealing itself is often a contained piece of work. Around Heathrow, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
Why book with us
- Homes, businesses and hotels
- Any old sealant cut out fully, not covered over
- 4.9 on Google from 180+ five-star reviews
- Tidy, careful work
Take a look at what affects the cost and our reviews.
Common problems we fix in Heathrow
A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
These are the problems we are asked about most:
- Linear gaps at the head of walls
- Fire seals that have cracked with movement
- Gaps flagged on a fire risk assessment
- Seals cut through by electricians, plumbers or data installers
If you let a flat or house near Heathrow Terminals 2 & 3 Rail station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
What your quote should include
- What guarantee comes with the work
- Whether you can choose the colour
- What the cure time is
- Is the old sealant removed completely?
Fire rated sealant around Heathrow
Heathrow has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
If you look after a building such as Bedfont Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Heathrow is about 2 miles north-west of Feltham, in Surrey. Wherever you are in the TW6 postcode area, we can carry out fire rated sealant at your property. Heathrow is one of 395 towns and villages in Surrey where we work. London is on our list too, around 16 miles away.
Jobs for fire rated sealant in TW6 is quoted and booked the same way as anywhere else. We also cover West Bedfont (1 mile south-west), Hatton (1 mile east), Bedfont (1 mile south-east), Stanwell (1 mile south-west) and Harlington (1 mile north-east). Within a short drive, we also cover Woking (12 miles south-west), Camberley (15 miles south-west), Epsom (12 miles south-east), Ewell (12 miles south-east), Egham (5 miles south-west) and Walton-on-Thames (6 miles south).
Local landmarks in Heathrow
We work in homes and buildings around The Queen's Arms and Space Studio West London. There’s a railway station in Heathrow itself: Heathrow Terminals 2 & 3 Rail station. Other landmarks nearby include Spelthorne Museum (3.5 miles south-west) and Harlington (1.6 miles north). The countryside around Heathrow includes Staines Reservoirs and Crane Meadows.
Towns and villages near Heathrow
Also in Heathrow
Honest limits
Before you book, it’s worth knowing the limits:
- Big openings where sealant alone is not the tested solution
- Assessing a building’s fire safety
- Issuing a fire rating or certificate for a building
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think before you book.
What we seal
- Plasterboard & masonry
- Service penetrations
- Pipe & cable gaps
- Flats & HMOs
- Door frames
- Linear gaps
Aftercare tips
Looking after new joints is easy, and it makes a real difference:
- Ask which product was used before you paint
- Store the list of sealed gaps with your building paperwork
- Allow for resealing whenever new services are run
- Get damaged fire seals looked at promptly
Avoid covering a sealed gap with anything that isn’t part of the tested detail. If it needs repair, use the same type of product. Ask us if you are not sure which product was used.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
Work for landlords, hotels and businesses
Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
FAQs for Heathrow
Do you work for landlords with property near Heathrow Terminals 2 & 3 Rail station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we’ll send you a clear quote.
Do you work in hotels near Heathrow?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
Can I add another job to the visit?
Yes. Just list everything you need and we will quote it together.
What sealant do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
Can ordinary silicone be used in a fire-stopping gap?
No. Standard sealants are not made or tested to stop fire. If it’s been used, we remove it and use the right product.
Can you tell me how many minutes the seal will last?
Ratings and certificates aren’t something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Do you guarantee your work?
Yes. Each job is guaranteed for twelve months, wherever you are.