East Sussex · England
Fire-rated sealant in Hartfield, East Sussex
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homeowners, landlords and businesses in Hartfield. Fully insured, ARBOMaster approved and guaranteed for a year.
- New service routes left unsealed after building work
- Old fire sealant that has split or come away
- Gaps flagged on a fire risk assessment
Fire rated sealant in Hartfield
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate, with a record of the products and locations if you need one. We are often asked to deal with cracked or shrunken fire-rated sealant and gaps around pipes and cables through fire-resisting walls, on plasterboard & masonry, linear gaps and service penetrations.
For a small place like Hartfield, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
We stand behind the work with a one-year guarantee.
- Where
- Hartfield (TN7)
- Wider area
- East Sussex
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
When something else is needed
In fairness, there are a few things sealant won’t fix:
- Issuing a fire rating or certificate for a building
- Deciding what fire stopping a building needs
- A wall that isn’t a fire-resisting element to begin with
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we will tell you honestly before booking.
Joints and surfaces we work on
- Plasterboard & masonry
- Flats & HMOs
- Pipe & cable gaps
- Linear gaps
- Service penetrations
- Door frames
Towns and villages near Hartfield
More services for Hartfield
What we are called out for in Hartfield
Buildings are refitted and reconfigured over the years. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
Keep an eye out for these signs:
- Seals cut through by electricians, plumbers or data installers
- Fire seals that have cracked with movement
- Gaps around pipes and cables through fire-resisting walls
- Standard silicone or caulk in a fire-stopping gap
For site and facilities teams at buildings such as St Mary the Virgin Church of England Primary School, fire-stopping around service openings should be restored whenever new services go in.
What your quote should include
- What guarantee comes with the work
- How the joint is cleaned and prepared
- Is the old sealant removed completely?
- How much experience the applicator has
How to look after the new joints
After the cure time, these simple habits help:
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Store the list of sealed gaps with your building paperwork
- Don’t paint over fire sealant until it has cured
- Get damaged fire seals looked at promptly
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. A lot of damaged fire stopping comes from later work.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
What we do, step by step
Before we leave, we go over the finished joints with you and explain the cure time. The visit itself usually takes from a few hours to a few days, depending on the number of gaps and the access, depending on the size of the job. In a small place like Hartfield, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your files.
Preparing for the visit
- Let us know about parking restrictions
- Where the joints are inside, avoid wetting them before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, call 0345 464 0079 or drop us an email.
Read more
Fire rated sealant around Hartfield
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
For landlords with property near Ashurst Kent station, any gap left by new services in shared walls should be closed with a fire-rated product. Community buildings like The Parish Church of St Mary are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Hartfield is about 4 miles north-west of Crowborough, in East Sussex. Across the TN7 area, we can carry out fire rated sealant at your property. 289 places in East Sussex are on our list, large and small. We also work in Crawley, about 13 miles from Hartfield.
Jobs for fire rated sealant in TN7 works the same way as everywhere else we cover. Whether your property is on High Street, Church Street and Rectory Field or anywhere close by, we can help. We also cover the places around Hartfield: Balls Green (1 mile east), Teasley Mead (3 miles north-east), Ashurst (3 miles north-east), Groombridge (3 miles east) and Stone Cross (3 miles north-east). We also work in nearby towns such as Crowborough (4 miles south-east), Uckfield (9 miles south), Heathfield (11 miles south-east), Wadhurst (10 miles east), Ridgewood (10 miles south) and Ringmer (15 miles south).
What’s near Hartfield
We work in homes and buildings around The Anchor Inn. For rail, the closest station is Ashurst Kent station, roughly 2.6 miles north-east. A little further out are Crowborough War Memorial Hospital (4 miles south-east) and Bolebroke Castle (1.3 miles north). The countryside around Hartfield includes Broadwater Warren RSPB Reserve.
Quotes for fire rated sealant in Hartfield
Your quote is based on your job. We look at:
- Any mould that needs treating
- Which sealant suits the joint
- Any working-time requirements on site
- How many rooms, windows or areas are involved
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Asking for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- Where the property is
- How many joints, rooms or windows are involved
- Pictures of the joints, sent by email
- Any previous sealing or DIY work
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that’s easy.
Common questions in Hartfield
Can you do fire rated sealant in Hartfield?
Yes. Our work covers London and the South East, and Hartfield is part of that. You can ring 0345 464 0079 or drop us an email and let us know what needs doing.
Do you work for landlords with property near Ashurst Kent station?
Yes. We work for landlords and letting agents as well as homeowners. Just call 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
What does intumescent mean?
Intumescent means it swells when heated, helping close the gap. It’s one type of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
Will the old sealant be removed?
Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Can you tell me which gaps need fire stopping?
No, assessment is not something we do. Once you have a specification or action list from your assessor or designer, we’ll quote for the sealant work on it.
Can I add another job to the visit?
Yes. Just list everything you need and you will get one quote.
Why act early in Hartfield
An unsealed gap lets smoke and fire get round a wall that was built to hold them back. A proper seal lets the wall do its job again, and the work involved is often modest. Where a wall is exposed, as many are in small places like Hartfield, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we’ll explain what it covers.
Why Hartfield clients choose us
- Quality sealants from Arbo and Everbuild
- Every job guaranteed for a year
- 20+ years of sealant experience
- Tidy, careful work
Take a look at how sealant jobs are priced and our reviews.
Different surfaces, different methods
Masonry and concrete
Preparation counts on brick, block and concrete. The gap is cleaned and backed where required before applying the sealant.
Flats and HMOs
Flats and HMOs rely on fire separation between homes and the common parts. We work through the gaps on your assessment room by room.