Greater London · England

Fire-rated sealant in Hampton, Greater London

Problem with your fire-stopping gaps in Hampton? We cut out the old, prepare the joints and apply the right sealant.

  • Standard silicone or caulk in a fire-stopping gap
  • Unsealed gaps where pipes and cables go through a wall
  • Old fire sealant that has split or come away

Fire rated sealant near Hampton

Landlord and commercial work in Hampton

Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.

Fire rated sealant in Hampton

We don’t assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. We work on linear gaps, door frames and service penetrations, and people most often call us about joints picked up in a fire-stopping survey and seals cut through by electricians, plumbers or data installers.

Commercial work in London comes with its own logistics: loading restrictions, building rules and tight access. For a building in Hampton, we agree timings and access before anything starts.

Big or small, you get the same one-year guarantee.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Place
Hampton (TW12, TW11)
Wider area
Greater London
Cover
One year on every job
Quote
A clear quote up front
Call
0345 464 0079
Updated
26 October 2026

Why deal with it now?

Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own that doesn’t depend on other work. In London conversions, one flat’s bathroom is often above another flat’s ceiling, and a slow leak from a failed seal can end up in the flat below. Putting it right early is much less trouble for homes in Hampton.

Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we’ll go through it with you.

Why us?

  • More than 20 years in sealant work
  • Arbo and Everbuild products
  • Domestic, commercial and hotel work
  • Full insurance on every job

Take a look at our cost guide and what customers say.

Surface by surface

Door frames

The gap between a door frame and the wall around it needs sealing as well as the door itself. We fill it with a fire-rated product suited to the materials either side.

Flats and HMOs

Flats and HMOs rely on fire separation between homes and the common parts. We work through the gaps on your assessment.

Commercial buildings in Hampton

Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details. Many London buildings have tight access and loading restrictions, so out-of-hours working can be arranged where needed.

Hampton is in London, so parking needs planning: tell us about permits, visitor bays or off-street space when you book. Rented homes near Hampton station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product. Managing a site like Hampton Infant School and Nursery? Then gaps opened by contractors for new cabling are a common finding in schools and offices.

Hampton is about 2 miles south-west of Twickenham, in Greater London. We provide fire rated sealant to homeowners, landlords and businesses in Hampton and nearby, as part of our work across Greater London. 764 places in Greater London are on our list, large and small. London is on our list too, around 13 miles away.

Jobs for fire rated sealant in TW12 and TW11 works the same way as everywhere else we cover. Local streets include Station Road, High Street and Old Farm Road. Main roads around Hampton include the A3008. Other places close to Hampton include Hanworth (1 mile north-west), Hampton Hill (1 mile east), West Molesey (1 mile south), Fulwell (1 mile north-east) and East Molesey (2 miles south-east). We also work in nearby towns such as London (13 miles north-east), City of Westminster (11 miles north-east), Marylebone (12 miles north-east), Kensington (9 miles north-east), St Pancras (13 miles north-east) and Shoreditch (15 miles north-east).

Around Hampton

Around Hampton, our work takes us to homes and buildings near Jolly Coopers pub, Lady Eleanor Holles School and Carlisle Park and the streets around them. Hampton’s nearest station is Hampton station, about 0.5 miles south of the centre. Other landmarks nearby include Treaty Centre (3.1 miles north) and Teddington Memorial Hospital (1.5 miles east). For a walk, there’s Oak Avenue Local Nature Reserve and Richmond Hill.

Map of Hampton © OpenStreetMap contributors

Can I do it myself?

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.

If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.

Keeping the joints in good condition

No joint lasts for ever, but care makes a real difference. Our tips:

  • Report cracked or damaged seals as soon as you notice them
  • Tell trades working in the building that fire seals must be put back
  • Store the list of sealed gaps with your building paperwork
  • Plan fire stopping into any work that goes through walls or floors

File the record of locations and products with your fire safety paperwork. It saves time at the next inspection or assessment.

Open gaps do not only matter in a fire: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.

FAQs for Hampton

Can parking be tricky for a visit in Hampton?

London parking needs a little planning, so let us know about permits, bays or a driveway when you book. The visit is then planned around what’s available.

Do you work for landlords with property near Hampton station?

Yes. We work for landlords and agents as well as homeowners, and several properties can be quoted together. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear price.

Is it messy?

Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.

Are you fully insured?

Yes. We’re fully insured for domestic and commercial work.

Does someone need to be in?

For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you do not need to watch us work.

Can you quote for more than one area?

Yes, we can. More than one area can be quoted together.

How do I get a quote for fire rated sealant in Hampton?

We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.

Do you certify the fire stopping?

We don’t issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer.

Quotes for fire rated sealant in Hampton

For a quick quote, just ask. What matters most is:

  • How easy the joints are to reach
  • How many areas need sealing
  • Whether there’s mould to deal with
  • The product the joint needs

The cost depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before we start, so you know where you stand.

Helping us quote

When you contact us, these details help:

  • Whether it has been sealed before
  • What’s wrong with the joints now
  • Access, such as stairs, a lift or height
  • Roughly how big the job is

To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.

How the visit works

When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take from a few hours to a few days, depending on the number of gaps and the access. For a job in Hampton, parking and access are the things to plan: let us know about parking, the floor we’ll be working on and any lift or shared entrance.

  1. Access to each area is agreed so the work can run in order.
  2. Old, damaged or unsuitable sealant is removed.
  3. Gaps are cleaned of dust and loose material.
  4. The fire-rated or intumescent sealant is applied and tooled to the tested detail.
  5. We record what was done and flag anything that needs a different system.

Preparing for the visit

  • On commercial sites, let us know about site rules
  • Let us know about stairs, lifts or work at height
  • Mention any parking rules near the property

Get a quote

A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.

Get a quick quote

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job