Essex · England
Fire Rated Sealant in Fryerning
We cover Fryerning for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Seals cut through by electricians, plumbers or data installers
- Open holes round services passing through fire walls
- Gaps where walls meet ceilings or slabs
Why it’s worth doing now in Fryerning
If an assessor has flagged gaps, it makes sense to close them before the next review. Getting them done and written up means you can show the action was taken. Around Fryerning, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, call 0345 464 0079 or send us an email for an honest opinion and a quote.
What you get with us
- Anti-fungal sanitary silicone in wet areas
- More than 20 years in sealant work
- 180+ five-star Google reviews
- We never seal over old sealant
See what affects the cost and our reviews.
Fire rated sealant in Fryerning, done properly
Filling a fire-stopping gap with standard silicone or caulk doesn’t make it fire-rated. Anything unsuitable comes out first and the gap is resealed with a product tested for that use. If you’re dealing with old fire sealant that has split or come away and gaps left after a refit or conversion, we can help, whatever the surface.
For holiday lets, converted business premises or a community building near Fryerning, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
A 12-month guarantee comes as standard, so you’re covered after we’ve gone.
- Location
- Fryerning (CM4)
- Region
- Essex
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What happens on the day
Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it generally takes from a few hours to a few days, depending on the number of gaps and the access. In a small place like Fryerning, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Anything that is not fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Let us know about stairs, lifts or work at height
- Clear items away from the joints we’re working on
Ask for a quote
We do not publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or send us an email.
Related advice
Surface by surface
Flats and HMOs
Working in occupied flats needs some planning. We agree access to each flat and the common parts before we start so residents know what to expect.
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. We clean out dust and debris before sealing so the seal has something sound to bond to.
How we quote for fire rated sealant
We quote each job individually. These are the things that affect it:
- How much there is to do
- The product the joint needs
- Working hours on commercial sites
- Whether there’s mould to deal with
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we will explain what it covers.
What we need to know
What to tell us when you ask for a quote:
- Any access issues, like height or stairs
- Whether it has been sealed before
- Where the property is
- The type of property
Want a quote for fire rated sealant? Please call 0345 464 0079 or drop us an email and tell us about the job. We will explain what we’d do and give you a clear quote before work begins.
When something else is needed
It helps to know what we can’t do too:
- Openings too large for sealant, which need batts, boards or another system
- Construction that does not provide fire resistance on its own
- Certifying a building or signing off its fire safety
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly before you book.
What we seal
- Linear gaps
- Service penetrations
- Flats & HMOs
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
Fire rated sealant around Fryerning
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
Managing a site like Ingatestone Infant School? Then fire-stopping around service openings should be restored whenever new services go in. Rented homes near Ingatestone station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Community buildings like Church of St Mary the Virgin are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Fryerning is about 4 miles north-west of Billericay, in Essex. For fire rated sealant in and around Fryerning, it’s easy to get a quote: please call 0345 464 0079 or send us an email. We’re based in Crawley and cover Essex, Fryerning included. Our Essex coverage runs to 644 places, and Fryerning is one of them. You can also see our page for Chelmsford, about 6 miles away.
Every address in CM4 is covered for fire rated sealant, from the main roads to the quietest streets. Fire rated sealant is available to properties on Back Lane, Mill Green Road and Mill Lane and the roads around them. We also cover Mill Green (1 mile north), Ingatestone (1 mile south), Beggar Hill (1 mile north-west), Green Street (1 mile west) and Mountnessing (2 miles south-west). Within a short drive, we also cover Chelmsford (6 miles north-east), Basildon (8 miles south-east), Harlow (13 miles north-west), Brentwood (5 miles south-west), Maldon (14 miles east) and Canvey Island (14 miles south-east).
Near you in Fryerning
We work in homes and buildings around Anglo European School and The Cricketers pub. The closest station to Fryerning is Ingatestone station, roughly 0.9 miles south-east. Nearby you will also find Mayflower Community Hospital (4.2 miles south). Open spaces near Fryerning include Norsey Wood.
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Make resealing part of every contractor’s brief
- Check whether a sealant can be painted before decorating over it
- Keep pictures of seals that will be hidden
- Get damaged fire seals looked at promptly
Follow the cure time we give you before decorating over the sealant. Some fire-rated sealants can be painted and some can’t.
Small gaps around services are simple to deal with while there are only a few. Over time, more work adds more holes and the job gets bigger.
Should I try it myself first?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Questions from Fryerning
Do you cover Fryerning for fire rated sealant?
Yes. Our work covers London and the South East, and Fryerning is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
Can you help a landlord with a rental near Ingatestone station?
Yes. We work for landlords and letting agents as well as householders. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll give you a clear quote.
What fire rating will the seal have?
We don’t give ratings or certificates for our work. The requirement comes from your assessor, designer or building control, and we apply a product tested for it.
Is intumescent sealant the same as fire-rated sealant?
An intumescent material expands when it’s heated. Intumescent sealants are a type of fire-rated sealant.
Can I use normal mastic around a pipe through a fire wall?
No. It might close the gap, but it is not a fire-rated seal. Use a product tested for that gap and service.
How long will you be here?
Typically it takes from a few hours to a few days, depending on the number of gaps and the access. Larger jobs naturally take longer, and we will tell you how long to expect.
Is it messy?
We keep the work tidy. Nearby surfaces are protected, and we clear up when we are done.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before applying anything new.