Essex · England
Fire Rated Sealant in Ingatestone
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Ingatestone and across Essex. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Gaps filled with a product that isn’t fire-rated
- Open gaps behind door architraves
- Fire stopping disturbed by later work
Fire rated sealant in Ingatestone
Fire stopping only performs as intended if it’s done to the detail: the right depth, the right backing and the right product for the substrate. That is the part we focus on, gap by gap. We work on plasterboard & masonry, flats & HMOs and door frames, and common reasons people get in touch are unsealed gaps around fire door frames and gaps filled with a product that isn’t fire-rated.
If you run a pub, café, guest house or shop in or near Ingatestone, its washrooms and kitchen need the same sealant care as any big building, and fire-rated sealant around service openings should be restored after new pipes or cables go through.
You get a one-year guarantee, the same in Ingatestone as everywhere else we work.
- Place
- Ingatestone (CM4)
- Wider area
- Essex
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Different surfaces, different methods
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We seal them along their full length leaving no stretch unsealed.
Plasterboard walls
Many fire-resisting walls in flats, offices and conversions are plasterboard. We use a product tested in that kind of wall for the gap we are sealing.
For landlords and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
How it works
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The work itself takes anything from a few hours to several days, depending on how many gaps there are from start to finish. Parking around Ingatestone is usually easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Let us know about earlier repairs to the joints
- Clear items away from the joints we’re working on
- Tell us if parking is tricky
Ask for a quote
Every job is quoted individually, so the first step is telling us about yours. Simply ring 0345 464 0079 or drop us an email and describe the job, and pictures are welcome.
Read more
Leave it or put it right?
For some gaps, sealant is not the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. If a gap is not suitable for sealant, we’ll tell you. In a smaller place like Ingatestone, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first.
Why Ingatestone customers choose us
- More than 20 years in sealant work
- Quality sealants from Arbo and Everbuild
- Tidy, careful work
- We never seal over old sealant
Take a look at what affects the cost and what customers say.
Towns and villages near Ingatestone
More services for Ingatestone
Ingatestone questions
Do you cover smaller places like Ingatestone?
Yes. Ingatestone is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you do fire rated sealant in Ingatestone?
Yes. We work across London and the South East, and Ingatestone is part of that. Just call 0345 464 0079 or send us an email with a few details of the job, and we will send you a clear quote.
Can you fill the gap behind a fire door frame?
Yes. Gaps behind architraves are a common job for us. The door and its fittings are a separate job for a door specialist.
What information do you need?
Let us know what needs doing and where, with pictures by email if possible. If we need more, we’ll ask.
Do you provide details of the products used?
Yes. Every gap we seal is listed with the product used so it’s there for the next inspection.
Can you work in occupied buildings?
Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Let us know the building’s hours and we’ll plan the work to suit.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Will you assess my building’s fire safety?
No. We follow the requirements from your assessor, designer or building control, and apply each product to its tested details.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Flag any open gap you spot round a pipe or cable
- Ask every contractor to reseal any fire stopping they disturb
- Never patch a fire seal with standard sealant
- Include hidden areas like risers in routine checks
Include fire stopping in your regular building checks. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
If a fire risk assessment has flagged a gap, don’t leave it for the next one. Have it sealed, then keep the record.
How we quote for fire rated sealant
For a quick quote, just ask. The main things that affect it are:
- Whether old sealant or filler has to be cut out
- The number and length of the joints
- Which sealant suits the joint
- The number of rooms or windows
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.
What to tell us for a quote
You do not need to know the technical terms. It helps if you can tell us:
- How we’d reach the joints
- What the problem is, such as mould, gaps, leaks or cracking
- Any previous sealing or DIY work
- Where the job is, and your postcode
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Workplaces and buildings in Ingatestone
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
For site and facilities teams at buildings such as Ingatestone Infant School, fire-stopping around service openings should be restored whenever new services go in. Community buildings like Church of St Edmund and St Mary are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building. Letting a property close to Ingatestone station? Then any gap left by new services in shared walls should be closed with a fire-rated product.
Ingatestone is about 3 miles north-west of Billericay, in Essex. Homes, rented property, offices and hotels in Ingatestone is covered for fire rated sealant, old or new, large or small. Every job comes with our 12-month guarantee. Our area takes in 644 places across Essex, large and small. Our Chelmsford page covers work nearby, about 7 miles away.
Jobs for fire rated sealant in CM4 works the same way as everywhere else we cover. That includes homes and businesses on Market Place, High Street and The Furlongs. Ingatestone is on the B1002, which makes it straightforward to reach. Neighbouring places we cover for fire rated sealant include Fryerning (1 mile north), Mill Green (1 mile north), Green Street (1 mile west), Buttsbury (1 mile south) and Beggar Hill (1 mile north-west). Further out, we also cover Chelmsford (7 miles north-east), Basildon (8 miles south-east), Harlow (13 miles north-west), Brentwood (4 miles south-west), Maldon (14 miles east) and Canvey Island (13 miles south-east).
What’s near Ingatestone
Locally, jobs take us to homes and businesses close to Anglo European School and The Bell Inn and the streets around them. Ingatestone has its own railway station: Ingatestone station. Nearby you’ll also find Mayflower Community Hospital (3.5 miles south). Not far away are Norsey Wood.