Dumfries and Galloway · Scotland
Fire Rated Sealant in Eskdalemuir
We cover Eskdalemuir for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Standard silicone or caulk in a fire-stopping gap
- Open holes round services passing through fire walls
- Holes left by a change of layout
The process
When we arrive, we start by going over the job with you. We protect the surfaces around the joints before we start. Most jobs take a few hours for a handful of gaps, and longer for a whole building. Outside jobs in Eskdalemuir need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- Access to each area is agreed so the work can run in order.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- On commercial sites, let us know about site rules
- Move anything stored near the joints
- Mention any leaks or damp you’ve noticed
How to get a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we will come back to you with a quote.
Related advice
Fire rated sealant in Eskdalemuir, done properly
A fire seal relies on being installed the way it was tested: correct depth, correct backing and a product suited to the surfaces. That’s the part we focus on. If you have open holes round services passing through fire walls and new service routes left unsealed after building work, we can put it right.
Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. All of them have washrooms, kitchens and fire-rated joints that need looking after.
You are covered for a year from the day we finish. If anything is not right with it, drop us a line at info@mrmastic.co.uk.

- Where
- Eskdalemuir (DG13)
- Wider area
- Dumfries and Galloway
- Cover
- A year, on every job
- Price
- A clear price before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Nearby places to Eskdalemuir
Other services in Eskdalemuir
Leave it or put it right?
An open gap in a fire-resisting wall is a route for smoke and fire. Sealing it properly restores what the wall was there to do, and the work involved is often modest. In an older home around Eskdalemuir, damp from a failed joint can get into timber and plaster.
Combining jobs into one visit is generally more efficient than separate visits. We’ll give you a clear quote for the lot.
Why book with us
- 4.9 on Google from 180+ five-star reviews
- Anti-fungal silicone where joints get wet
- An ARBOMaster approved applicator
- Neat joints and a tidy finish
Take a look at how sealant jobs are priced or what customers say.
For landlords and businesses
We also work for property managers and facilities teams. We can quote a run of properties together.
We work for landlords and letting agents as well as homeowners. Resealing between tenancies keeps a property looking cared for.
What affects the cost of fire rated sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The number and length of the joints
- How easy the joints are to reach
- How many rooms, windows or areas are involved
- The type of sealant required
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference.
What to tell us for a quote
Before you ask for a quote, have a think about:
- How we’d reach the joints
- The address or postcode of the job
- Whether it has been sealed before
- The rough size of the job
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and give you a clear quote.
Should I try it myself first?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Keeping the joints in good condition
Good habits help new joints last longer. Our tips:
- Allow for resealing whenever new services are run
- Never patch a fire seal with standard sealant
- Check whether a sealant can be painted before decorating over it
- Get damaged fire seals looked at promptly
Don’t drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.
Your questions about fire rated sealant in Eskdalemuir
Are the rules for fire-rated sealant different in Scotland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you cover smaller places like Eskdalemuir?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do you seal gaps around fire door frames?
Yes. We seal the gap between the frame and the wall with a suitable fire-rated product. The door, its seals and closer are for a door specialist.
Is there any odour?
There can be a smell while the sealant cures, which fades as it sets. Ventilation helps.
What does intumescent mean?
Intumescent means it swells when heated to help seal the gap. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.
Do you carry out fire risk assessments?
No. That is for a fire risk assessor, designer or building control. Our job is applying the sealant to their specification.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.
Can I add another job to the visit?
Yes, we can. More than one area can go on one quote.
Commercial buildings in Eskdalemuir
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
Around Eskdalemuir, as everywhere, fire rated sealant is only as good as the preparation behind it. For buildings such as Eskdalemuir Church, gaps around pipes and cables are worth checking after any building work there.
Eskdalemuir is about 19 miles south-west of Hawick, in Dumfries and Galloway. Eskdalemuir gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Our Dumfries and Galloway coverage runs to 138 places, Eskdalemuir among them. Edinburgh is on our list too, around 46 miles away.
Jobs for fire rated sealant in DG13 is quoted and booked the same way as anywhere else. Other places close to Eskdalemuir include Corrie Common (8 miles south), Newton Wamphray (9 miles west), Johnstonebridge (10 miles south-west), Beattock (11 miles west) and Moffat (11 miles west). Within a short drive, we also cover Lockerbie (13 miles south-west), Lochmaben (14 miles south-west) and Ecclefechan (15 miles south).
How the job changes by surface
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We seal that gap with a fire-rated sealant suited to the frame and wall.
Masonry and concrete
Brick, block and concrete walls and floors are sealed with products tested in masonry. The gap is cleaned of dust first.
