Hampshire · England
Fire Rated Sealant in Enham Alamein
Our applicators work in Enham Alamein on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly.
- Cracked or shrunken fire-rated sealant
- Unsealed gaps where pipes and cables go through a wall
- Seals cut through by electricians, plumbers or data installers
Looking after it afterwards
To keep the joints looking good and working properly:
- Keep photos of seals that will be hidden
- Never patch a fire seal with standard sealant
- Do not paint over fire sealant until it has cured
- Allow for resealing whenever new services are run
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and have them put right.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
Fire rated sealant in Enham Alamein, done properly
A fire seal relies on being installed the way it was tested: the right depth, the right backing and the right product for the substrate. That detail is what we take care over, gap by gap. If you are dealing with sealant items on a fire risk assessment action list and gaps where walls meet ceilings or slabs, we can help, whatever the surface.
If you have holiday lets, a converted barn used for business or a community building near Enham Alamein, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Enham Alamein (SP11)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Common problems we fix in Enham Alamein
Door frames are a common weak spot. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.
Look out for any of the following:
- Holes left by a change of layout
- Ordinary sealant used where a fire-rated product was needed
- Fire stopping disturbed by later work
- Gaps where walls meet ceilings or slabs
Managing a site like Smannell and Enham Church of England (Aided) Primary School? Then service openings in fire-resisting walls need checking after any refurbishment.
Comparing quotes
- Are they insured?
- What product goes in the joint
- How long to leave it before use
- What the quote includes, VAT included or not
Enham Alamein: your questions answered
Is Enham Alamein in your area for fire rated sealant?
Yes. We work across London and the South East, and Enham Alamein is part of that. You can call 0345 464 0079 or email us and tell us what needs doing.
I let a flat near Andover station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just phone 0345 464 0079 or drop us an email with the address and what needs doing, and we will send you a clear quote.
Do you certify the fire stopping?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and list the locations and products for you.
How long will you be here?
That depends on the amount of work, but as a guide it takes a few hours for a handful of gaps, and longer for a whole building. We’ll give you a better idea when we quote.
Are you insured?
Yes. We are fully insured, and we’ve been doing sealant work for more than 20 years.
What do you put in the joint?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and we’ll quote it together.
Can you match the sealant colour?
We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.
Nearby places to Enham Alamein
More services for Enham Alamein
How we quote for fire rated sealant
You will get a clear quote before we start. It takes into account:
- The type of sealant required
- Whether old sealant or filler has to be cut out
- Access and height
- Whether there’s mould to deal with
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, call 0345 464 0079 or drop us an email for an honest opinion and a quote.
What we need to know
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- A few pictures by email, if you can
- Where the property is
- What the problem is, such as mould, gaps, leaks or cracking
- How many joints, rooms or windows are involved
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.
Fire rated sealant in Enham Alamein: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Rented homes near Andover station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product. For buildings such as Saint George, gaps around pipes and cables are worth checking after any building work there.
Enham Alamein is about 2 miles north of Andover, in Hampshire. Enham Alamein gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Enham Alamein is one of 683 towns and villages in Hampshire we cover. Southampton is on our list too, about 23 miles from Enham Alamein.
Every address in SP11 is within our area for fire rated sealant. We cover properties on Newbury Road, Montgomery Road and Kings Road and the roads around them. We also cover the places around Enham Alamein: Upper Enham (1 mile north), Knights Enham (1 mile south), Little London (1 mile north-east), Smannell (1 mile east) and East Anton (1 mile south). Within a short drive, we also cover Winchester (14 miles south-east), Hyde (14 miles south-east), Tidworth (8 miles west), Weeke (13 miles south-east), Kempshott (14 miles east) and Stanmore (14 miles south-east).
Local landmarks in Enham Alamein
In Enham Alamein, that means homes and buildings near The Hare & Hounds pub and Harrow Way Community School. The nearest railway station is Andover station, roughly 2.2 miles south of the centre. Nearby you’ll also find Andover War Memorial Hospital (2 miles south-west) and Finkley Down Farm Museum (1.7 miles south-east). The countryside around Enham Alamein includes Mill Lake and Anton Lakes.
Leave it or put it right?
Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own that does not depend on other work. Older cottages and farmhouses around Enham Alamein can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
Why us?
- Fully insured
- Approved under the ARBOMaster scheme
- Tidy, careful work
- Any old sealant cut out fully, not covered over
Read how sealant jobs are priced and our reviews.
Work for landlords, hotels and businesses
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we are fully insured.
We work for landlords and letting agents as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
Should I try it myself first?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
The process
You don’t need to clear the whole room or building, only the area right around the joints. We protect the rest, and the work takes a few hours for a handful of gaps, and longer for a whole building in most cases. Somewhere as small as Enham Alamein, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- We record the locations and products used for your records.
Preparing for the visit
- Try not to wet indoor joints just before the visit
- Let us know about parking restrictions
- Keep children and pets away from the work area
Ask for a quote
For fire rated sealant in Enham Alamein, phone 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before any work starts.