West Sussex · England
Fire Rated Sealant in Elmer
Fire rated sealant across Elmer and nearby, with old sealant always removed completely.
- Open gaps behind door architraves
- Open holes round services passing through fire walls
- Holes left by a change of layout
Fire rated sealant for homes and businesses in Elmer
We don’t assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. What we do is apply the right product to that specification, properly and neatly. If you are dealing with unsealed gaps where pipes and cables go through a wall and open joints along the top of partitions, we can help, on linear gaps, door frames and pipe & cable gaps alike.
If you run a pub, café, guest house or shop in or near Elmer, the washrooms and kitchen need the same attention as a big site, and fire-rated sealant around service openings should be restored after new pipes or cables go through.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Where
- Elmer (PO22)
- Wider area
- West Sussex
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
When to call us in Elmer
A lot of fire stopping is out of sight: above ceilings, inside risers and behind panels. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
Common reasons people contact us are:
- Standard silicone or caulk in a fire-stopping gap
- New service routes left unsealed after building work
- Open joints along the top of partitions
- Fire seals that have cracked with movement
For buildings such as St Nicholas Church, service openings in its walls need the right fire-rated sealant, as in any building.
What your quote should include
- What guarantee comes with the work
- Is VAT in the price?
- What the cure time is
- Which sealant they’ll use, and why
Why deal with it now?
Leaving a gap until a refurbishment comes round can mean years with it open. On its own, sealing it now is a small job and needn’t wait for anything else. In an older home around Elmer, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
Why choose Mr Mastic in Elmer
- An ARBOMaster approved applicator
- 180+ five-star Google reviews
- Every job guaranteed for a year
- We’re fully insured
Take a look at our cost guide or our reviews.
DIY versus a professional finish
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Honest limits
We’d rather tell you now than do work that will not last, so these are the limits:
- Certifying a building or signing off its fire safety
- Problems with the door itself rather than the gap around the frame
- Large holes that need a different fire-stopping system
If you are not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer before you book.
Where we work in Elmer
- Door frames
- Linear gaps
- Plasterboard & masonry
- Pipe & cable gaps
- Service penetrations
- Flats & HMOs
How the visit works
There’s no need to move everything out before we come, only the area right around the joints. Everything nearby is protected, and the work takes from a few hours to a few days, depending on the number of gaps and the access for a typical job. For a job in Elmer, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your files.
Before we arrive
- Tell us if parking is tricky
- Mention any leaks or damp you’ve noticed
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
Every job is quoted individually, so start by telling us what you need. Just ring 0345 464 0079 or send us an email with the details, and pictures are welcome.
Advice
Also in Elmer
Quotes for fire rated sealant in Elmer
Some jobs are bigger than they look, and some smaller. What affects the quote:
- How many rooms, windows or areas are involved
- Access and height
- How much there is to do
- Any mould that needs treating
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you’re unsure, ring 0345 464 0079 or send us an email and we will give you an honest view and a quote.
Asking for a quote
When you call or email, it’s useful to know:
- Any previous sealing or DIY work
- Roughly how big the job is
- Whether it’s a home or a business
- How we’d reach the joints
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved and give you a clear price.
Workplaces and buildings in Elmer
For seaside hotels, guest houses and holiday lets around Elmer, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
For site and facilities teams at buildings such as Bishop Tufnell CofE Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices. If you let a flat or house near Ford station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Elmer is about 3 miles east of Bognor Regis, in West Sussex. Elmer gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Elmer is one of 371 towns and villages in West Sussex we cover. You can also see our page for Portsmouth, about 20 miles away.
Postcode districts we cover here for fire rated sealant: PO22. We cover properties on Elmer Road, Ancton Lane and East Avenue. Other places close to Elmer include Middleton-on-Sea (1 mile west), Bilsham (1 mile north), Atherington (1 mile north-east), Flansham (2 miles north-west) and Horsemere Green (2 miles north-east). Larger places within reach include Worthing (9 miles east), Bognor Regis (3 miles west), Chichester (8 miles north-west), Selsey (9 miles south-west), Littlehampton (4 miles east) and Shoreham-by-Sea (15 miles east).
Around Elmer
Around Elmer, our work takes us to homes and buildings near Felpham Community College and the streets around them. The nearest railway station is Ford station, roughly 2.9 miles north-east. Other landmarks nearby include Bognor Regis Museum (3.1 miles west) and Bognor Regis War Memorial Hospital (2.9 miles west).
Questions from Elmer
Is Elmer within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you help a landlord with a rental near Ford station?
Yes. We work for landlords and agents as well as householders, and several properties can go on one quote. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
What does intumescent mean?
Intumescent means it swells when heated, helping close the gap. Intumescent sealants are one kind of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
Do you guarantee your work?
Yes: twelve months. If anything is not right with the work within the year, let us know and we will sort it.
Does someone need to be in?
We need access to the joints, so we’ll agree that with you when we book. Indoors, that usually means someone at home.
Can I choose the sealant colour?
Yes. White, clear and grey are common, and other colours are available for many products, and we agree the colour with you before we start.
How long does fire rated sealant take?
A typical job takes from a few hours to a few days, depending on the number of gaps and the access, including preparation and clearing up. We’ll confirm how long when we quote.
Do you do fire sealant around door frames?
Yes, if the gap is within the product’s tested range. Our work is the gap around the frame, and we will mention anything we notice about the door.
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. A few tips:
- Keep photos of seals that will be hidden
- Do not paint over fire sealant until it has cured
- Ask every contractor to reseal any fire stopping they disturb
- Never patch a fire seal with standard sealant
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Have it sealed, then keep the record.