Kent · England
Fire Rated Sealant in Elham
Fire rated sealant for Elham and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Open joints along the top of partitions
- Gaps filled with a product that isn’t fire-rated
- New service routes left unsealed after building work
Why deal with it now?
Waiting for the next refit can leave a gap open for years. On its own, sealing it now is a small job. In a small place like Elham, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
The cost depends on the size of the job, how hard the old material is to remove and access to the work. We give a clear quote before work begins, so you know where you stand.
Why choose Mr Mastic in Elham
- Domestic, commercial and hotel work
- Arbo and Everbuild products
- We’re fully insured
- More than 20 years in sealant work
About our fire rated sealant in Elham
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then the sealant goes in to the depth the product’s details set. Typical jobs include door frames with gaps between frame and wall and joints picked up in a fire-stopping survey, across door frames, flats & HMOs and pipe & cable gaps.
If you have holiday lets, a converted barn used for business or a community building near Elham, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
You are covered for a year from the day we finish. If there’s a problem with it, please ring 0345 464 0079 or send us an email.
- Location
- Elham (CT4)
- Wider area
- Kent
- Cover
- A year, on every job
- Quote
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Elham questions
I let a flat near Sandling station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Will you come out to Elham?
Yes. Elham is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
What do you need from me for a quote?
Just the basics: where it is, what you’ve noticed and how we reach it. Then ring 0345 464 0079 or send us an email.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we are using.
Should I try DIY first?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Is the work guaranteed?
Yes. Every job comes with a one-year guarantee.
How long does fire rated sealant take?
Typically it takes from a few hours to a few days, depending on the number of gaps and the access. Bigger jobs take longer, and we’ll say how long yours will take.
Are you an approved applicator?
Yes. We hold ARBOMaster approved applicator status and we’re fully insured too.
When to call us in Elham
In some buildings the gap was filled with the wrong thing in the first place: ordinary expanding foam, standard silicone or decorators’ caulk in a place that needed a tested fire seal. It may look fine, but it is not a fire-rated seal.
Signs it’s time to call us include:
- Gaps around pipes and cables through fire-resisting walls
- Gaps filled with a product that isn’t fire-rated
- Fire seals that have cracked with movement
- Gaps left after a refit or conversion
For buildings such as Church of St Mary the Virgin, older buildings that have had new heating or wiring often have service gaps worth checking.
Before booking anyone
- How much experience the applicator has
- How long to leave it before use
- What insurance they hold
- How the joint is cleaned and prepared
When something else is needed
To be straight with you, some problems need a different trade:
- Sign-off of the building, which sits with building control or your assessor
- Construction that does not provide fire resistance on its own
- Openings too large for sealant, which need batts, boards or another system
If you are not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer.
Surfaces we seal
- Linear gaps
- Door frames
- Flats & HMOs
- Service penetrations
- Plasterboard & masonry
- Pipe & cable gaps
What happens on the day
We keep the work tidy and contained to the joints we are treating. The job usually takes from a few hours to a few days, depending on the number of gaps and the access, and we tell you how long to leave it before we go. For a village or hamlet like Elham, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- Each gap is measured and its substrate and service noted.
- Any non-fire-rated filler is removed.
- We fit backing where needed and apply the fire-rated sealant to depth.
- We hand over a list of locations and products for your files.
How to prepare
- Let us know about earlier repairs to the joints
- Keep children and pets away from the work area
- Mention any leaks or damp you’ve noticed
Getting a quote
Need a quote? Please call 0345 464 0079 or email us and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Advice
Landlords, agents and businesses in Elham
Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.
For anyone letting property in or around Elham, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.
DIY versus a professional finish
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
Workplaces and buildings in Elham
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
Rented homes near Sandling station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product. Managing a site like Elham Church of England Primary School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
Elham is about 5 miles north-west of Folkestone, in Kent. Anywhere in CT4, our applicators can take on fire rated sealant. Across Kent, we cover 922 places, and Elham is one of them. You can also see our page for Chelmsford, roughly 49 miles from Elham.
We cover every part of the CT4 postcode area for fire rated sealant. We cover properties on High Street, Pound Lane and Vicarage Lane. Close by, we work in Swingfield Minnis (2 miles east), Densole (3 miles south-east), Selsted (3 miles east), Breach (3 miles north-east) and Lodge Lees (3 miles north-east). Further out, we also cover Ashford (11 miles west), Canterbury (9 miles north), Dover (8 miles east), Folkestone (5 miles south-east), Whitstable (14 miles north) and Deal (13 miles east).
Landmarks near Elham
Locally, jobs take us to homes and businesses close to The King's Arms and the streets around them. Elham’s nearest station is Sandling station, about 4.7 miles south-west of the centre. Nearby you’ll also find Royal Victoria Hospital (5.3 miles south-east) and Elham Valley Countryside Centre And Railway Museum (3.7 miles south). The countryside around Elham includes Cheriton Hill.
More services for Elham
What the job involves on each surface
Door frames
We deal with the gap around the frame, not the door. Doors, seals and closers are for a door specialist.
Masonry and concrete
Holes through concrete and block are rarely neat. We check the gap size around the service against the product’s tested range.