Aberdeen · Scotland
Fire Rated Sealant in Dyce
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Dyce, with a one-year guarantee on every job. Ask us for a quote.
- Old fire sealant that has split or come away
- Sealant items on a fire risk assessment action list
- Holes left by a change of layout
Fire rated sealant in Dyce, done properly
We often work from an action list drawn up by a fire risk assessor for buildings in Dyce. If you share the list, we can quote for the gaps that need fire-rated sealant. We work on pipe & cable gaps, linear gaps and flats & HMOs, and common reasons people get in touch are old fire sealant that has split or come away and joints picked up in a fire-stopping survey.
In a Scottish city, commercial sealant work covers offices, hotels, student accommodation, care homes and factored tenement blocks. For a building in Dyce, the job might be washroom resealing or fire-rated sealant around service openings.
You are covered for a year from the day we finish. If anything isn’t right with it, send an email to info@mrmastic.co.uk.
- Place
- Dyce (AB21, AB22)
- Region
- Aberdeen
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Commercial buildings in Dyce
There are hotels and other places to stay in and around Dyce. For hotels, a room-by-room programme keeps most rooms in use while the work goes on. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.
For site and facilities teams at buildings such as Dyce Academy, fire-stopping around service openings should be restored whenever new services go in. Rented homes near Dyce station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product.
Dyce is about 4 miles north-west of Aberdeen, in Aberdeen. Jobs in Dyce get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Aberdeen, we cover 63 places, and Dyce is one of them.
Postcode districts we cover here for fire rated sealant: AB21 and AB22. You will find streets such as Glen Road, Argyll Road and Walton Road, all of which we cover. Dyce is on the A947, so it’s easy for us to get to. Nearby, we also carry out fire rated sealant in Stoneywood (1 mile south), Newhills (2 miles south), Bucksburn (2 miles south), Corsehill (2 miles north-east) and Danestone (3 miles south-east). Further out, we also cover Aberdeen (4 miles south-east), Rosemount (5 miles south-east), Berryden (4 miles south-east), Ferryhill (6 miles south-east), New Aberdeen (5 miles south-east) and Tillydrone (4 miles south-east). Dyce is one of the larger places we cover in Aberdeen.
Near you in Dyce
There’s a railway station in Dyce itself: Dyce station. Nearby you will also find Woodend Hospital (3.8 miles south). Open spaces near Dyce include Badgers' Hill and Corby Loch.
Should I try it myself first?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Your questions about fire rated sealant in Dyce
Do Scottish building rules affect fire-rated sealant work in Dyce?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Can you help a landlord with a rental near Dyce station?
Yes, landlords and agents are among the people we work for. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear quote.
Can you fill the gap behind a fire door frame?
Yes, where the gap suits a sealant detail. We seal the frame-to-wall gap, not the door itself and we’ll tell you if we spot problems with the door.
Can you match the sealant colour?
Yes. White, clear and grey are common, and other colours are available, and we agree the colour with you before work begins.
Do you guarantee your work?
Yes. Every job comes with a one-year guarantee.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we’re using and why.
Is standard sealant good enough for a fire gap?
No. Ordinary silicone, caulk or foam is not tested as fire stopping. We cut it out and reseal with a fire-rated product.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done.
When it is not the sealant
A few problems are outside what sealant work can do:
- Big openings where sealant alone is not the tested solution
- Issuing a fire rating or certificate for a building
- Problems with the door itself rather than the gap around the frame
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we’ll give you a straight answer before booking.
What we seal
- Linear gaps
- Pipe & cable gaps
- Plasterboard & masonry
- Flats & HMOs
- Service penetrations
- Door frames
Aftercare tips
So the new joints stay in good condition:
- Ask every contractor to reseal any fire stopping they disturb
- Never patch a fire seal with standard sealant
- Keep pictures of seals that will be hidden
- Plan fire stopping into any work that goes through walls or floors
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and have them put right.
It’s easiest to seal gaps while they’re few and easy to reach. Over time, more work adds more holes and the list grows.
What we do, step by step
When we arrive, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before any work begins. The work generally takes from a few hours to a few days, depending on the number of gaps and the access. In a Scottish city, a lot of jobs are in tenement flats, up a common stair from a shared close. In Dyce, it helps to know the floor, the door entry arrangements and the nearest parking.
- Before starting, we go through the specification or action list with you.
- Each gap is measured and its substrate and service noted.
- Unsuitable material such as ordinary foam or silicone is cut out.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your records.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Keep children and pets away from the work area
- On commercial sites, let us know about site rules
Getting a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Read more
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
For anyone letting property in or around Dyce, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.
Leave it or put it right?
For some gaps, sealant is not the right answer and another system is needed. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. If a gap isn’t suitable for sealant, we will tell you. Scottish rain finds any gap around a frame or wall joint, and in Dyce, damp can spread through stone and plaster before anyone sees it.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What you get with us
- Trusted Arbo and Everbuild sealants
- Domestic, commercial and hotel work
- Every job guaranteed for a year
- 20+ years of sealant experience
Take a look at how sealant jobs are priced and what customers say.
Towns and villages near Dyce
Also in Dyce
What affects the quote in Dyce
You will get a clear quote before any work starts. It takes into account:
- Mould in or behind the old joints
- Access and height
- How many rooms, windows or areas are involved
- The product the joint needs
Doing several joints on one visit is usually more efficient than separate visits, so it’s worth mentioning everything you’d like done. We will give you a clear price for the lot.
Asking for a quote
There’s no need for technical detail. It helps if you can tell us:
- Pictures of the joints, sent by email
- What’s wrong with the joints now
- How many joints, rooms or windows are involved
- Whether it has been sealed before
We quote each job on its own, so start by telling us what you need. Simply send an email to info@mrmastic.co.uk and describe the job, and pictures are welcome.