Highland · Scotland

Dunvegan Fire Rated Sealant

Intumescent and fire-rated sealant around gaps, frames and service penetrations for Dunvegan, backed by a one-year guarantee. Ask us for a quote.

  • Damaged fire sealant left by other trades
  • Holes left by a change of layout
  • Open holes round services passing through fire walls

Need fire rated sealant in Dunvegan?

Fire rated sealant in Dunvegan, done properly

Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. Common call-outs are for gaps flagged on a fire risk assessment and seals cut through by electricians, plumbers or data installers, across plasterboard & masonry, service penetrations and pipe & cable gaps.

Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. All of them have washrooms, kitchens and fire-rated joints that need looking after.

The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Place
Dunvegan (IV55)
Wider area
Highland
Cover
One year on every job
Quote
Quoted before any work starts
Email
info@mrmastic.co.uk
Updated
26 October 2026

Signs you need fire rated sealant in Dunvegan

A lot of fire stopping is out of sight: in ceiling voids, service risers and behind boxing. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.

Any of these means the joints need attention:

  • Unsealed gaps around fire door frames
  • Damaged fire sealant left by other trades
  • Sealant items on a fire risk assessment action list
  • Old fire sealant that has split or come away

Whether the job is in Dunvegan itself or nearby, the right material for each joint matters as much as a neat finish.

Comparing quotes

  • Whether they seal over old material or remove it
  • What preparation is included
  • How hidden problems are handled
  • How the colour is chosen

How to choose a mastic man

What affects the cost of fire rated sealant

There’s no set price list. The quote depends on:

  • Any mould that needs treating
  • How many areas need sealing
  • How easy the joints are to reach
  • Which sealant suits the joint

Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

What we need to know

Photos help, but a description is a good start. Try to tell us:

  • Access, such as stairs, a lift or height
  • A few pictures by email, if you can
  • What’s wrong with the joints now
  • Whether it’s a home or a business

Need a quote? Please send an email to info@mrmastic.co.uk with a few details. We’ll explain what we’d do and give you a clear quote before work begins.

How the job changes by surface

Service penetrations

A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each.

Linear gaps

Head-of-wall gaps are often hidden above suspended ceilings. We work along the whole run leaving no stretch unsealed.

Aftercare tips

To keep the joints looking good and working properly:

  • Allow for resealing whenever new services are run
  • Ask every contractor to reseal any fire stopping they disturb
  • Store the list of sealed gaps with your building paperwork
  • Do not fill fire-stopping gaps with ordinary foam or silicone

Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.

Open gaps do not only matter in a fire: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.

For landlords and businesses

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.

We work for letting agents and landlords as well as householders. Sealant work between tenants keeps a property looking cared for.

What fire rated sealant looks like in Dunvegan

If you run a hotel, guest house or holiday let in a coastal place like Dunvegan, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. We install fire-rated sealant to the product’s tested details; we don’t certify buildings or carry out fire risk assessments.

In and around Dunvegan, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.

Dunvegan (Gaelic: Dùn Bheagan) is in Highland. If you need fire rated sealant in Dunvegan, it’s easy to get a quote: please email us at info@mrmastic.co.uk. We are based in Crawley and cover Highland. Dunvegan is one of 253 towns and villages in Highland where we work.

Postcode districts we cover here for fire rated sealant: IV55. Local streets include Mill Road, Rathad Chille Mhoile and Kings Brae, all of which we cover. Nearby, we also carry out fire rated sealant in Kilmuir (1 mile north), Lonmore (1 mile south-east), Colbost (3 miles west), An t-Aodann Ban (6 miles north-east) and Coillore (9 miles south-east). If you are somewhere remote, a little more planning is needed, so let us know when you get in touch.

Local landmarks in Dunvegan

Other landmarks nearby include Giant Angus Macaskill Museum (less than half a mile north-west) and Dunvegan Castle (1.2 miles north-west). Not far away are An Dubh Loch and Healabhal Mhòr.

Map of Dunvegan © OpenStreetMap contributors

Dunvegan questions

Is Dunvegan in your area for fire rated sealant?

Yes, Dunvegan is within the area we cover. We work across all of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job, and we will give you a clear price.

Do you cover smaller places like Dunvegan?

Yes. Dunvegan is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.

Are you fully insured?

Yes, we are fully insured.

Is there a guarantee?

Yes. Every job comes with a 12-month guarantee.

Which products do you use?

It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.

What do you need from me for a quote?

Let us know what needs doing and where. If we need more, we’ll ask.

Is intumescent sealant the same as fire-rated sealant?

Intumescent means it swells when heated. It’s one type of fire-rated sealant; which product suits depends on the gap, the substrate and the service.

Can ordinary silicone be used in a fire-stopping gap?

No. Standard sealants aren’t made or tested to stop fire. If it’s been used, we remove it and use the right product.

Why act early in Dunvegan

Sealant isn’t the fix for every opening. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. If a gap is not suitable for sealant, we will tell you. Around Dunvegan, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.

The cost depends on how much there is to do, how much old material has to come out and access to the work. We give a clear quote before we start.

Why us?

  • We never seal over old sealant
  • 20+ years of sealant experience
  • ARBOMaster approved applicator
  • Full insurance on every job

Read what affects the cost or our reviews.

How it works

Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. For a place like Dunvegan, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.

  1. Access to each area is agreed so the work can run in order.
  2. Old, damaged or unsuitable sealant is removed.
  3. Dust and loose debris are cleaned from each gap.
  4. We apply and tool the sealant to the product’s tested detail.
  5. We record what was done and flag anything that needs a different system.

Before we arrive

  • Tell us about any water getting in
  • For business premises, tell us about site rules or sign-in
  • Keep children and pets away from the work area

How to get a quote

Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job.

Ask for a quote

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job