Highland · Scotland
Fire Rated Sealant in Coillore
Fire rated sealant in Coillore from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Gaps filled with a product that isn’t fire-rated
- Unsealed gaps around fire door frames
- Linear gaps at the head of walls
Fire rated sealant in Coillore
In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. We seal them with a product tested for that kind of gap. If you are dealing with damaged fire sealant left by other trades and gaps left after a refit or conversion, we can put it right, whatever the surface.
For a place like Coillore, the journey and timings are planned in advance, so the job can fit around guests, residents or opening hours where possible.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.
- Location
- Coillore (IV56)
- Wider area
- Highland
- Guarantee
- 12 months on all our work
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Do you need fire rated sealant in Coillore?
If the sealant is too shallow, has the wrong backing or sits on a dusty surface, it isn’t installed as tested. We see plenty of fire stopping that was hurried particularly when it was the last job before handover.
If you can see any of these, it’s time to have the joints looked at:
- Sealant items on a fire risk assessment action list
- Gaps where walls meet ceilings or slabs
- Open gaps behind door architraves
- Standard silicone or caulk in a fire-stopping gap
In and around Coillore, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Questions to ask before booking
- When the joint can take water or movement
- The length of the guarantee
- Is VAT in the price?
- Which colour the sealant will be
The process
Most of a good job is in the preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Coillore may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
Before we arrive
- Tell us if parking is tricky
- Keep children and pets away from the work area
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. When it suits you, drop us a line at info@mrmastic.co.uk.
Read more
More services for Coillore
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Workplaces and buildings in Coillore
If you run a hotel, guest house or holiday let in a coastal place like Coillore, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we do not certify buildings or do fire risk assessments.
Whether the job is in Coillore itself or nearby, the right material for each joint matters as much as a neat finish.
Coillore is in Highland. From the centre of Coillore to the outskirts, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Coillore is one of 253 towns and villages in Highland we cover.
Here we cover the IV56 postcode area for fire rated sealant. We also cover the places around Coillore: Carbost (4 miles south-east), Lonmore (8 miles north-west), An t-Aodann Ban (8 miles north), Dunvegan (9 miles north-west) and Portree (9 miles north-east). If you are somewhere remote, the job takes a little more planning, so mention it when you ask for a quote.
Local landmarks in Coillore
Not far away are Loch Duagrich.
FAQs for Coillore
Do Scottish building rules affect fire-rated sealant work in Coillore?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We don’t certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Can you do fire rated sealant in Coillore?
Yes. Our work covers the whole of Scotland, and Coillore is part of that. Just email us at info@mrmastic.co.uk with a few details of the job.
Do you have insurance?
Yes, we are fully insured.
Is standard sealant good enough for a fire gap?
No. It might close the gap, but it is not a fire-rated seal. A tested fire-rated product is needed, or ask us to do it.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Where is Mr Mastic based?
We’re based in Crawley, and we work across South East England, London and Scotland.
Will we have a record of what was sealed?
Yes. Locations and products are written up when we finish. If you need pictures or a set layout, ask when you get a quote.
Do you guarantee your work?
Yes, always. Each job is guaranteed for twelve months, wherever you are.
What we can’t put right
Honest advice matters more to us than a booking, so here’s what new sealant will not do:
- Fire risk assessments, which need a qualified assessor
- Problems with the door itself rather than the gap around the frame
- Construction that does not provide fire resistance on its own
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly.
Where we work in Coillore
- Plasterboard & masonry
- Pipe & cable gaps
- Linear gaps
- Door frames
- Service penetrations
- Flats & HMOs
Looking after it afterwards
Good habits help new joints last longer. Our tips:
- Allow for resealing whenever new services are run
- Look in service cupboards and ceiling voids from time to time
- Take pictures of fire stopping before ceilings or boxing go back
- Report cracked or damaged seals as soon as you notice them
Any fire seal that’s cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
If a fire risk assessment has flagged a gap, don’t leave it for the next one. Get it sealed and recorded so you can show it was dealt with.
What the job involves on each surface
Linear gaps
Some linear gaps have to cope with movement as well as fire. We choose a product and depth that suit the gap and the movement.
Plasterboard walls
Many fire-resisting walls in flats, offices and conversions are plasterboard. The sealant has to be one tested in plasterboard.
Landlords, agents and businesses in Coillore
We also work for property managers and facilities teams in Coillore and across Highland. We can quote a run of properties together, and we are fully insured for the work.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.