North Lanarkshire · Scotland
Dullatur Fire Rated Sealant
Problem with your fire-stopping gaps in Dullatur? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Seals cut through by electricians, plumbers or data installers
- Ordinary sealant used where a fire-rated product was needed
- Open holes round services passing through fire walls
How to look after the new joints
To keep the joints looking good and working properly:
- Take photos of fire stopping before ceilings or boxing go back
- Include hidden areas like risers in routine checks
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Allow for resealing whenever new services are run
Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
Fire rated sealant in Dullatur, done properly
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. Measuring the gap and checking what it’s made of comes first, then the sealant goes in to the depth the product’s details set. If you’re dealing with damaged fire sealant left by other trades and holes left by a change of layout, we can help, whatever the surface.
For a place like Dullatur, the journey and timings are planned in advance, so it can be fitted around bookings or opening times where possible.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Dullatur (G68)
- Wider area
- North Lanarkshire
- Guarantee
- A year, on every job
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
For landlords and businesses
Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
For anyone letting property in or around Dullatur, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and pictures by email help.
How the job changes by surface
Service penetrations
Wherever a service goes through a fire-resisting wall or floor, there’s a gap around it. We seal it with a product tested for that service and gap size.
Masonry and concrete
Masonry is dusty and porous, so preparation matters. The gap is cleaned and backed where required before applying the sealant.
Common questions in Dullatur
Do you cover smaller places like Dullatur?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you help a landlord with a rental near Croy station?
Yes, rental work is part of what we do. You can send an email to info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before any work starts.
How do I get a quote for fire rated sealant in Dullatur?
It depends on the job, so we quote each one individually. To get one, drop us a line at info@mrmastic.co.uk and tell us what needs doing and where.
Do I need to be at home?
That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
Can ordinary silicone be used in a fire-stopping gap?
No. Standard sealants are not made or tested to stop fire. We cut it out and reseal with a fire-rated product.
Is there a guarantee?
Yes. Every job comes with our 12-month guarantee.
Can you quote for more than one area?
Yes. Just list everything you need.
Is intumescent sealant the same as fire-rated sealant?
Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent types expand when heated, and they’re one of the options. The specification and the tested detail decide which is used.
Also near Dullatur
What else we do in Dullatur
Commercial buildings in Dullatur
Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we don’t certify buildings or do fire risk assessments. Dullatur has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed.
Managing a site like Our Lady's High? Then service openings in fire-resisting walls need checking after any refurbishment.
Dullatur is about 1 mile north of Cumbernauld, in North Lanarkshire. We provide fire rated sealant to householders, landlords and businesses in Dullatur and nearby, as part of our work across North Lanarkshire. We cover 89 towns and villages across North Lanarkshire. Our Glasgow page covers work nearby, about 13 miles away.
Jobs for fire rated sealant in G68 works the same way as everywhere else we cover. Whether your property is on Victoria Road, Prospect Road and The Lane or a nearby road, we can help. Other places close to Dullatur include Craigmarloch (1 mile south-west), Balloch (1 mile south-west), Croy (1 mile south-west), Banton (1 mile north) and Smithstone (2 miles south-west). Within a short drive, we also cover Motherwell (12 miles south), Coatbridge (8 miles south), Airdrie (7 miles south), Wishaw (14 miles south), Bellshill (10 miles south) and Burnfoot (7 miles south).
Around Dullatur
Dullatur’s nearest station is Croy station, roughly 1.3 miles south-west of the centre. Nearby you’ll also find Cumbernauld Castle (1.7 miles east) and Kilsyth Victoria Cottage Hospital (2.4 miles west). The countryside around Dullatur includes Antermony Loch and Bar Hill.
What we’re called out for in Dullatur
Gaps also open up as buildings move: a seal that cracks or pulls away leaves a path for smoke. Knocks, maintenance and building work damage it further.
Look out for any of the following:
- New service routes left unsealed after building work
- Linear gaps at the head of walls
- Open gaps behind door architraves
- Old fire sealant that has split or come away
Letting a property close to Croy station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Questions to ask before you book
- Who turns up on the day
- What happens if the job turns out different
- Is the old sealant removed completely?
- The length of the guarantee
What affects the cost of fire rated sealant
There’s no set price list, because jobs vary so much. The quote depends on:
- When we can work, for business premises
- Which sealant suits the joint
- The number of rooms or windows
- The old material and how stubborn it is
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
What we need to know
Photos help, but a description is a good start. Please mention:
- If it’s domestic, commercial or a hotel
- Pictures of the joints, sent by email
- Roughly how big the job is
- If someone has resealed it before
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
Why deal with it now?
Fire-rated sealants need more care than everyday sealant. How it’s installed changes how it performs, and we work to the product details every time. In an older home around Dullatur, damp from a failed joint can get into timber and plaster.
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Why us?
- Domestic, commercial and hotel work
- Trusted Arbo and Everbuild sealants
- Neat joints and a tidy finish
- Old sealant always removed completely
Read how sealant jobs are priced and our reviews.
What we do, step by step
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take anything from a few hours to several days, depending on how many gaps there are. Outdoor work around Dullatur depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.
- We start with the survey or action list, checking the size and surfaces of every gap.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
Before we arrive
- Move anything stored near the joints
- For indoor joints, keep the area dry beforehand if you can
- Let us know about earlier repairs to the joints
How to get a quote
For fire rated sealant in Dullatur, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and you will get a clear quote before work begins.