Highland · Scotland

Fire-rated sealant in Coylumbridge, Highland

We cover Coylumbridge for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.

  • Fire seals that have cracked with movement
  • Gaps where walls meet ceilings or slabs
  • Gaps left after a refit or conversion

Fire rated sealant in Coylumbridge

Should I try it myself first?

A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly.

The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.

About our fire rated sealant in Coylumbridge

Bigger jobs can be worked through in stages, flat by flat or floor by floor, with each location and product recorded. That record is useful for your files and for whoever looks at the building next. Typical jobs include gaps filled with a product that isn’t fire-rated and gaps where walls meet ceilings or slabs, on plasterboard & masonry, flats & HMOs and service penetrations.

Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. All of them have washrooms, kitchens and fire-rated joints that need looking after.

Our work is backed for twelve months, in Coylumbridge and everywhere else we cover.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Location
Coylumbridge (PH22)
Wider area
Highland
Cover
One year on every job
Quote
A clear quote up front
Email
info@mrmastic.co.uk
Last updated
26 October 2026

What the job involves on each surface

Masonry and concrete

Preparation counts on brick, block and concrete. The gap is cleaned and backed where required before applying the sealant.

Linear gaps

A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement from the manufacturer’s details.

Fire rated sealant in Coylumbridge: local notes

In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.

Around Coylumbridge, as everywhere, fire rated sealant is only as good as the preparation behind it.

Coylumbridge is about 26 miles south-east of Inverness, in Highland. We carry out fire rated sealant for homes and businesses in Coylumbridge, as part of our work across Highland. Coylumbridge is one of 253 towns and villages in Highland we cover. You can also see our page for Dundee, roughly 57 miles from Coylumbridge.

Work in PH22 is quoted and booked the same way as anywhere else. We also cover Badenoch (2 miles north-west), Aviemore (2 miles north-west), Boat of Garten (5 miles north), Kincraig (6 miles south-west) and Carrbridge (7 miles north). Within a short drive, we also cover Grantown-on-Spey (13 miles north-east), Kingussie (12 miles south-west) and Newtonmore (15 miles south-west). If you are somewhere remote, the job takes a little more planning, so mention it when you ask for a quote.

What’s near Coylumbridge

For rail, the closest station is Aviemore station, roughly 1.6 miles north-west of the centre. Well-known places in the area include Loch an Eilein Castle (2.1 miles south-west). Open spaces near Coylumbridge include Loch Pityoulish.

Map of Coylumbridge © OpenStreetMap contributors

FAQs for Coylumbridge

Do you cover smaller places like Coylumbridge?

Yes, we do. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.

How do Scotland’s building regulations apply to fire-rated sealant in Coylumbridge?

Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that’s how we fit it. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.

What fire rating will the seal have?

Ratings and certification sit with the product’s test evidence and whoever specified the work. Our part is installing the specified product to its tested details and giving you a record of where it went.

Where are you based?

Mr Mastic is based in Crawley. We cover Coylumbridge and the rest of Highland, along with the rest of our area.

Which products do you use?

The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.

Will there be a smell?

Sometimes, a little. It fades as the sealant cures, and ventilation helps.

Can you quote for more than one area?

Of course. Doing several areas at once is generally more efficient.

Is intumescent sealant the same as fire-rated sealant?

An intumescent material expands when it’s heated. Intumescent sealants are a type of fire-rated sealant, and the choice depends on the gap.

Keeping the joints in good condition

Once the sealant has cured, a few habits help it last:

  • Include fire stopping when you schedule refits
  • Keep photos of seals that will be hidden
  • Report cracked or damaged seals as soon as you notice them
  • Make resealing part of every contractor’s brief

Leave the sealant to cure fully before painting near it. Some fire-rated sealants can be painted and some cannot.

Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is normally a straightforward job.

What happens on the day

Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes from a few hours to a few days, depending on the number of gaps and the access. In smaller Scottish places, parking is normally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.

  1. We go through the gaps on your list or survey and check each one’s size and substrate.
  2. Anything that isn’t fit for the job comes out, and the gap is cleaned.
  3. Backing or fill is fitted where the product’s tested detail calls for it.
  4. Fire-rated or intumescent sealant is applied to the right depth and tooled.
  5. We record the locations and products used for your records.

Preparing for the visit

  • Move anything stored near the joints
  • For business premises, tell us about site rules or sign-in
  • Keep pets and children clear of the area while we work

How to get a quote

It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, drop us a line at info@mrmastic.co.uk.

Get a price

Related advice

What affects the cost of fire rated sealant

Call for a quick quote. What matters most is:

  • Access and height
  • The product the joint needs
  • How much there is to do
  • How much old sealant there is and how hard it is to remove

There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.

What we need to know

The more you tell us, the more accurate the quote. When you ask for a quote, tell us:

  • Where the job is, and your postcode
  • The problem you’ve noticed
  • How we’d reach the joints
  • The rough size of the job

Call for a quick quote, or email us if that is easier. Describe what needs sealing and we’ll talk you through the work before giving you a price.

What happens if it’s left?

If an assessor has flagged gaps, it makes sense to close them before the next review. Getting them done and written up gives you evidence that the item was dealt with. In a place like Coylumbridge, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.

The cost depends on the amount of work, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts.

Why choose Mr Mastic in Coylumbridge

  • We leave the area clean and tidy
  • Quality sealants from Arbo and Everbuild
  • A 12-month guarantee on all work
  • Sanitary silicone with an anti-fungal additive in wet areas

Read our cost guide and customer reviews.

When to call us in Coylumbridge

Gaps also open up as buildings move: a seal that cracks or pulls away leaves a path for smoke. Knocks, maintenance and building work damage it further.

People normally contact us when they notice one of these:

  • Gaps where walls meet ceilings or slabs
  • Gaps filled with a product that is not fire-rated
  • Old fire sealant that has split or come away
  • Holes left by a change of layout

Rented homes near Aviemore station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.

What to look for in a quote

  • How the colour is chosen
  • Which sealant they’ll use, and why
  • How much experience the applicator has
  • Whether they seal over old material or remove it

Our hiring checklist

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job