West Sussex · England
Fire Rated Sealant in Coneyhurst
Intumescent and fire-rated sealant around gaps, frames and service penetrations for homes and businesses in Coneyhurst and across West Sussex. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Seals cut through by electricians, plumbers or data installers
- Gaps where walls meet ceilings or slabs
- Ordinary sealant used where a fire-rated product was needed
Fire rated sealant in Coneyhurst
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap, with a record of the products and locations if you need one. If you’re dealing with gaps flagged on a fire risk assessment and linear gaps at the head of walls, we can help, whatever the surface.
In a village or hamlet like Coneyhurst, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. They all have washrooms, kitchens and service openings that need the right sealant.
Whatever the size of the job, it’s backed by our 12-month guarantee in Coneyhurst and across West Sussex.
- Where
- Coneyhurst (RH14)
- Wider area
- West Sussex
- Guarantee
- A year, on every job
- Quote
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Do you need fire rated sealant in Coneyhurst?
Gaps around door frames are easily missed. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.
If you can see any of these, it’s time to have the joints looked at:
- Unsealed gaps around fire door frames
- Seals cut through by electricians, plumbers or data installers
- Open holes round services passing through fire walls
- Gaps flagged on a fire risk assessment
If you let a flat or house near Billingshurst station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
What to look for in a quote
- Whether all the old sealant comes out first
- Are they insured?
- Is VAT in the price?
- When the joint can take water or movement
What the job involves on each surface
Masonry and concrete
Preparation counts on brick, block and concrete. We brush and vacuum the gap and use backing where the detail needs it before the sealant goes in.
Flats and HMOs
In occupied buildings, we plan the order of work with you. Access to flats and common areas is agreed in advance.
Landlords, agents and businesses in Coneyhurst
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
We work for landlords and agents as well as homeowners. Resealing between tenancies keeps a property looking cared for.
How it works
All our tools and materials come with us in the van, so you don’t need to buy or prepare anything. After a quick look at the joints together, we protect the area and start. It normally takes from a few hours to a few days, depending on the number of gaps and the access. For a village or hamlet like Coneyhurst, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- On commercial sites, let us know about site rules
- Keep children and pets away from the work area
Getting a quote
For fire rated sealant in Coneyhurst, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we will agree the price before any work begins.
Related advice
DIY versus a professional finish
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
Fire rated sealant around Coneyhurst
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
Schools such as The Weald School are buildings too, and fire-stopping around service openings should be restored whenever new services go in.
Coneyhurst is about 6 miles south-west of Horsham, in West Sussex. Homes, rented property, offices and hotels in Coneyhurst can book us for fire rated sealant. Every job comes with our 12-month guarantee. Our West Sussex coverage runs to 371 places, Coneyhurst among them. You can also see our page for Crawley, roughly 13 miles from Coneyhurst.
Postcode districts we cover here for fire rated sealant: RH14. We also cover the places around Coneyhurst: Billingshurst (2 miles north-west), Five Oaks (3 miles north), Newpound Common (3 miles north-west), The Haven (4 miles north) and Slinfold (5 miles north). Within a short drive, we also cover Crawley (13 miles north-east), Horsham (6 miles north-east), Worthing (13 miles south), Haywards Heath (14 miles east), Burgess Hill (13 miles east) and Littlehampton (14 miles south).
Near you in Coneyhurst
The closest station to Coneyhurst is Billingshurst station, roughly 1.2 miles north-west of the centre. A little further out are Christs Hospital School Museum (3.9 miles north-east). For a walk, there’s Knepp Wildland.
How we quote for fire rated sealant
There’s no set price list, because jobs vary so much. What we look at:
- Any mould that needs treating
- How many rooms, windows or areas are involved
- The type of sealant required
- Whether the work is at height
We don’t show prices on the website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or send us an email and we’ll talk you through it.
Asking for a quote
To make quoting easier, let us know:
- A few pictures by email, if you can
- If someone has resealed it before
- What’s wrong with the joints now
- The rough size of the job
We don’t publish a price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or send us an email.
What happens if it’s left?
A quick fill with any sealant to hand is not fire stopping. Fire-rated products are tested in set gap sizes, depths and substrates, which is why we match the product and the method to each gap. In a small place like Coneyhurst, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
What you pay reflects the work, not a rough estimate. That is why we ask about the job first.
What you get with us
- Full insurance on every job
- Approved under the ARBOMaster scheme
- Every job guaranteed for a year
- Arbo and Everbuild products
See what affects the cost and what customers say.
Also near Coneyhurst
More services for Coneyhurst
Common questions in Coneyhurst
Do you cover smaller places like Coneyhurst?
Yes, Coneyhurst is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Can you do fire rated sealant in Coneyhurst?
Yes, Coneyhurst is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or drop us an email and tell us what needs doing, and we will give you a clear quote.
Can you work in occupied buildings?
Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Tell us how the building is used and we will plan around it.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.
Can you seal over the old sealant?
No. Fresh sealant does not stick to old sealant, and anything trapped underneath, including mould and water, stays there. It all has to come out first.
Do you provide details of the products used?
Yes. We note each location and the product that went in, so you have it on file.
What fire rating will the seal have?
Ratings and certificates aren’t something we issue. The performance comes from the product’s tested details and the specification from your assessor or designer.
Do you have insurance?
Yes, we are fully insured for domestic and commercial work.