Buckinghamshire · England
Fire Rated Sealant in Coleshill
Fire rated sealant for Coleshill and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Door frames with gaps between frame and wall
- Cracked or shrunken fire-rated sealant
- Gaps where walls meet ceilings or slabs
How we handle fire rated sealant in Coleshill
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. Typical jobs include linear gaps at the head of walls and sealant items on a fire risk assessment action list, on flats & HMOs, pipe & cable gaps and door frames.
Somewhere as small as Coleshill, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. They all have washrooms, kitchens and service openings that need the right sealant.
Our work is backed for twelve months, in Coleshill and everywhere else we cover.
- Where
- Coleshill (HP7)
- Wider area
- Buckinghamshire
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Looking after it afterwards
To keep the joints looking good and working properly:
- Check risers, ceiling voids and cupboards during building checks
- Flag any open gap you spot round a pipe or cable
- Ask which product was used before you paint
- Tell trades working in the building that fire seals must be put back
Avoid covering a sealed gap with anything that isn’t part of the tested detail. Repairs should use a matching fire-rated product. We can tell you which product we used.
If a fire risk assessment has flagged a gap, don’t leave it for the next one. Have it sealed, then keep the record so you can show it was dealt with.
Quotes for fire rated sealant in Coleshill
We don’t publish a price list, because jobs vary so much. What we look at:
- Any mould that needs treating
- Access and height
- The old material and how stubborn it is
- Any working-time requirements on site
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we will talk you through it.
What we need to know
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Photos by email, if that’s easy
- Where the property is
- Access, such as stairs, a lift or height
- How many joints, rooms or windows are involved
For a quote, call 0345 464 0079 or drop us an email with the location and a short description of the problem. You’ll have a clear quote before any work starts.
Common questions in Coleshill
Do you cover smaller places like Coleshill?
Yes, Coleshill is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you work for landlords with property near Amersham station?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or drop us an email with the address and a few details, and we will give you a fixed price before any work starts.
Do you take out the old sealant first?
Always. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Is it OK to seal over old sealant?
No, it won’t last. It can look neat for a few weeks, but the new layer lifts away from the old one. The old sealant has to come out completely.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
Is the work guaranteed?
Yes. There’s a 12-month guarantee on every job, large or small.
How long will you be here?
Most jobs take from a few hours to a few days, depending on the number of gaps and the access, including the preparation. Your quote will say how long we expect yours to take.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.
Fire rated sealant in Coleshill: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details. There are hotels and other places to stay in and around Coleshill. Hotel work can be planned room by room, with out-of-hours working where needed.
For landlords with property near Amersham station, any gap left by new services in shared walls should be closed with a fire-rated product. Community buildings like Church of All Saints are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking. If you look after a building such as Coleshill Church of England Infant School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Coleshill is about 2 miles south-west of Amersham, in Buckinghamshire. Anywhere in HP7, we can carry out fire rated sealant at your property. We cover 263 towns and villages across Buckinghamshire, large and small. Our Reading page covers work nearby (20 miles or so).
Jobs for fire rated sealant in HP7 is quoted and booked the same way as anywhere else. Fire rated sealant is available to properties on Village Road, Meadowcot Lane and Barracks Hill. Other places close to Coleshill include Winchmore Hill (1 mile west), Woodrow (1 mile north-west), Penn Street (2 miles north-west), Mop End (2 miles north-west) and Amersham on the Hill (2 miles north-east). Within a short drive, we also cover Aylesbury (14 miles north-west), High Wycombe (5 miles west), Chesham (4 miles north), Marlow (8 miles south-west), Beaconsfield (3 miles south) and Chalfont St Peter (4 miles south-east).
What’s near Coleshill
We work in homes and buildings around Amersham School, The Red Lion pub and Amersham Hall, among other places. The closest station to Coleshill is Amersham station, roughly 2 miles north-east of the centre. A little further out are Great Missenden (4 miles north-west) and Amersham Hospital (1.1 miles north). The countryside around Coleshill includes Long Grove Wood.
Why it’s worth doing now in Coleshill
Squirting in whichever sealant is nearest doesn’t make a fire seal. Fire-rated products are tested in set gap sizes, depths and substrates, so both the product and the method matter. In a small place like Coleshill, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What you get with us
- Quality sealants from Arbo and Everbuild
- Domestic, commercial and hotel work
- Sanitary silicone with an anti-fungal additive in wet areas
- Over 20 years’ experience
Read our cost guide or customer reviews.
Places near Coleshill
More services for Coleshill
DIY versus a professional finish
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so tell us about it when you ask for a quote.
Different surfaces, different methods
Flats and HMOs
In occupied buildings, we plan the order of work with you. We agree access to each flat and the common parts before any work starts so residents know what to expect.
Service penetrations
New gaps tend to show up where services have been added. Old or unsuitable filler comes out before the right sealant goes in.
When it is not the sealant
New sealant cannot fix everything, and we’d rather say so up front. It won’t solve:
- Sign-off of the building, which sits with building control or your assessor
- Big openings where sealant alone isn’t the tested solution
- Fire doors that need new seals, closers or hardware
If you are not sure, just ring 0345 464 0079 or drop us an email and we will give you a straight answer before you book.
What we seal
- Flats & HMOs
- Pipe & cable gaps
- Plasterboard & masonry
- Service penetrations
- Door frames
- Linear gaps
The process
All our tools and materials come with us in the van. After a quick look at the joints together, we protect the area and start. Most jobs take from a few hours to a few days, depending on the number of gaps and the access. Somewhere like Coleshill needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- We put in whatever backing or fill the product detail specifies.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
Before we arrive
- Keep children and pets away from the work area
- On commercial sites, let us know about site rules
- Tell us if parking is tricky
Ask for a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, phone 0345 464 0079 or email us.