South Lanarkshire · Scotland

Cleghorn Fire Rated Sealant

Problem with your fire-stopping gaps in Cleghorn? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.

  • Joints picked up in a fire-stopping survey
  • Gaps where walls meet ceilings or slabs
  • Holes left by a change of layout

Fire rated sealant for Cleghorn homes and businesses

About our fire rated sealant in Cleghorn

In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. We work on service penetrations, flats & HMOs and door frames, and common reasons people get in touch are gaps flagged on a fire risk assessment and holes left by a change of layout.

Work in a place like Cleghorn is planned ahead, journey included, so it can be fitted around bookings or opening times where possible.

We stand behind the work with a 12-month guarantee.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Where
Cleghorn (ML11)
Wider area
South Lanarkshire
Guarantee
A year, on every job
Quotes
A clear price before any work starts
Email
info@mrmastic.co.uk
Page updated
26 October 2026

What happens if it’s left?

For some gaps, sealant is not the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. We will say so if a gap needs something other than sealant. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water behind a failed seal does the most damage when nobody’s watching.

What you pay reflects the work, not a rough estimate. That’s why we ask about the job first.

Why book with us

  • Domestic, commercial and hotel work
  • We are fully insured
  • Trusted Arbo and Everbuild sealants
  • 180+ five-star Google reviews

See our cost guide or what customers say.

How the job changes by surface

Flats and HMOs

In occupied buildings, we plan the order of work with you. We agree access to each flat and the common parts before we start to keep disruption down.

Linear gaps

Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.

Keeping the joints in good condition

After the cure time, these simple habits help:

  • Make resealing part of every contractor’s brief
  • Report cracked or damaged seals as soon as you notice them
  • Keep photos of seals that will be hidden
  • File the fire-stopping record where your assessor can find it

Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.

It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole.

DIY sealant or a professional job?

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

Signs you need fire rated sealant in Cleghorn

Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it’s easy to leave unsealed when doors are changed.

It’s worth asking for a quote if you see:

  • Fire seals that have cracked with movement
  • Sealant items on a fire risk assessment action list
  • Standard silicone or caulk in a fire-stopping gap
  • Fire stopping disturbed by later work

For site and facilities teams at buildings such as Lanark Grammar School, fire-stopping around service openings should be restored whenever new services go in.

What your quote should include

  • Are they insured?
  • Whether the sealant suits the joint
  • What the cure time is
  • How much experience the applicator has

Choosing a sealant specialist

Commercial buildings in Cleghorn

Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details; we do not certify buildings or carry out fire risk assessments.

Rented homes near Lanark station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.

Cleghorn is about 5 miles south-east of Carluke, in South Lanarkshire. Homes, rented property, offices and hotels in Cleghorn can book us for fire rated sealant, old or new, large or small. Every job comes with our 12-month guarantee. Cleghorn is one of 139 towns and villages in South Lanarkshire where we work. For nearby work, see our Glasgow page, about 24 miles away.

All of ML11 is covered for fire rated sealant. We cover properties on Hagholm Road, Roman Court and Jerviswood Drive and the roads around them. Neighbouring places we cover for fire rated sealant include Ravenstruther (1 mile east), Lanark (2 miles south-west), Carstairs (2 miles east), New Lanark (2 miles south-west) and Kilncadzow (3 miles north-west). Further out, we also cover Hamilton (14 miles north-west), Larkhall (10 miles west), Carluke (5 miles north-west), Strathaven (13 miles west), Bothwell (15 miles north-west) and Burnbank (15 miles north-west).

What’s near Cleghorn

For rail, the closest station is Lanark station, about 1.7 miles south-west of the centre. A little further out are William Smellie Memorial Hospital (2.2 miles west) and Carstairs Castle (2 miles east). For a walk, there’s Black Hill and Lanark Loch.

Map of Cleghorn © OpenStreetMap contributors

What we do, step by step

On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The job generally takes from a few hours to a few days, depending on the number of gaps and the access. Outdoor work around Cleghorn depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Work indoors isn’t affected.

  1. We plan the order of work and access, floor by floor or flat by flat.
  2. We take out any damaged or unsuitable sealant.
  3. Dust and loose debris are cleaned from each gap.
  4. We apply and tool the sealant to the product’s tested detail.
  5. We record what was done and flag anything that needs a different system.

Preparing for the visit

  • For business premises, tell us about site rules or sign-in
  • Tell us about any water getting in
  • Mention any tricky access

Ask for a quote

It all starts with a short chat. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. When it suits you, send an email to info@mrmastic.co.uk.

Get a quick quote

Read more

Cleghorn questions

Do you work for landlords with property near Lanark station?

Yes. We work for landlords and letting agents as well as householders, and several properties can be quoted together. You can send an email to info@mrmastic.co.uk with the details for a clear quote.

Do Scottish building rules affect fire-rated sealant work in Cleghorn?

Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.

Do you do fire sealant around door frames?

Yes, if the gap is within the product’s tested range. Our work is the gap around the frame.

Where is Mr Mastic based?

Our base is in Crawley, and we work across South East England, London and Scotland.

Can you give us a record of the work?

Yes. When the job is done, we give you the locations and products. If you need photos or a set layout, ask when you get a quote.

Is standard sealant good enough for a fire gap?

No. Ordinary silicone, caulk or foam is not tested as fire stopping. We cut it out and reseal with a fire-rated product.

Is there a guarantee?

Yes. There’s a 12-month guarantee on every job.

Will the old sealant be removed?

Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.

What affects the quote in Cleghorn

For a quick quote, just ask. The main things that affect it are:

  • How many rooms, windows or areas are involved
  • How much old sealant there is and how hard it is to remove
  • Whether there’s mould to deal with
  • Any working-time requirements on site

Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.

What we need to know

To help us quote quickly, let us know:

  • Any previous sealing or DIY work
  • The rough size of the job
  • Whether it’s a home or a business
  • Access, such as stairs, a lift or height

Want a quote for fire rated sealant? Please drop us a line at info@mrmastic.co.uk with a few details. We’ll explain what we’d do and give you a clear price before we start.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job