Kent · England
Fire-rated sealant in Burmarsh, Kent
Problem with your fire-stopping gaps in Burmarsh? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Damaged fire sealant left by other trades
- Door frames with gaps between frame and wall
- Holes left by a change of layout
Fire rated sealant in Burmarsh
Ordinary silicone or decorators’ caulk in a fire-stopping gap isn’t a fire-rated seal. Anything unsuitable comes out first and the gap is resealed with a product tested for that use. If you have open gaps behind door architraves and gaps around pipes and cables through fire-resisting walls, we can help, on door frames, plasterboard & masonry and pipe & cable gaps alike.
For a small place like Burmarsh, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
There’s a 12-month guarantee on every job, large or small.
- Location
- Burmarsh (TN29)
- Region
- Kent
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Should I try it myself first?
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly.
Other services in Burmarsh
Fire rated sealant around Burmarsh
For seaside hotels, guest houses and holiday lets around Burmarsh, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a church, hall or community building such as Church of All Saints, service openings in its walls need the right fire-rated sealant, as in any building.
Burmarsh is about 4 miles south-west of Hythe, in Kent. We carry out fire rated sealant for householders, landlords and businesses in Burmarsh, as part of our work across Kent. Burmarsh is one of 922 places in Kent we cover for fire rated sealant. You can also see our page for Brighton, roughly 51 miles from Burmarsh.
All of TN29 is within our area for fire rated sealant. Streets in the area include Church Road, Painesfield Close and Thorndike Road, and we cover them all. We also cover Postling Green (3 miles north-west), St Mary's Bay (3 miles south), Newchurch (3 miles west), St Mary in the Marsh (3 miles south-west) and Aldington (4 miles north-west). We also work in nearby towns such as Ashford (9 miles north-west), Dover (14 miles north-east), Folkestone (8 miles east), Hythe (4 miles north-east), Tower Hamlets (14 miles north-east) and Hawkinge (8 miles north-east).
Near you in Burmarsh
We work in homes and buildings around The Shepherd And Crook Public House and the streets around them. Burmarsh’s nearest station is Westenhanger station, about 3.7 miles north-east. Well-known places in the area include Hythe Museum (4 miles east) and Lympne Castle (2 miles north-east).
Surface by surface
Flats and HMOs
Flats and HMOs rely on fire separation between homes and the common parts. We seal the gaps your assessor has identified room by room.
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run.
For landlords and businesses
Landlords and agents in Burmarsh can book us as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
Housing providers, facilities teams and property managers book us too. Several sites can go on one quote, and we’re fully insured.
What happens on the day
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for a handful of gaps, and longer for a whole building. In a small place like Burmarsh, access is normally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Locations and products are noted so you have them on file.
How to prepare
- Keep children and pets away from the work area
- Where the joints are inside, avoid wetting them before we arrive
- Mention any tricky access
How to get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Read more
How to look after the new joints
A little care helps the new joints last. Our advice:
- Tell trades working in the building that fire seals must be put back
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Take pictures of fire stopping before ceilings or boxing go back
- Allow for resealing whenever new services are run
Do not drill through or remove a fire seal without putting it back properly. New services through a sealed wall should include fire stopping in the plan.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Sealing it early is a simple step to take.
FAQs for Burmarsh
Do you work for landlords with property near Westenhanger station?
Yes, we work for letting agents and landlords. Just phone 0345 464 0079 or send us an email and tell us about the property, and we’ll send you a clear quote.
Do you cover smaller places like Burmarsh?
Yes. Burmarsh is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Are you fully insured?
Yes. We are fully insured, and we’ve been doing sealant work for more than 20 years.
Do you carry out fire risk assessments?
No, assessment isn’t something we do. When your assessor or designer has set out what’s needed, we’ll quote for the sealant work on it.
How long will you be here?
Most jobs take a few hours for a handful of gaps, and longer for a whole building. Your quote will say how long we expect yours to take.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and we’ll quote it together.
Can I do it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before resealing.
Why it’s worth doing now in Burmarsh
An unsealed gap lets smoke and fire get round a wall that was built to hold them back. A proper seal lets the wall do its job again, and the sealing itself is often a contained piece of work. Where a wall is exposed, as many are in small places like Burmarsh, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Call for a quick quote and we’ll explain what it covers.
Why us?
- Trusted Arbo and Everbuild sealants
- 12-month guarantee on every job
- Neat joints and a tidy finish
- ARBOMaster approved applicator
Read our cost guide and what customers say.
Do you need fire rated sealant in Burmarsh?
Gaps also open up as buildings move: a seal that cracks or pulls away leaves a path for smoke. Knocks, maintenance and building work damage it further.
Keep an eye out for these signs:
- Gaps around pipes and cables through fire-resisting walls
- Gaps where walls meet ceilings or slabs
- New service routes left unsealed after building work
- Ordinary sealant used where a fire-rated product was needed
For landlords with property near Westenhanger station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
What to look for in a quote
- Whether VAT is included
- How long to leave it before use
- Whether they seal over old material or remove it
- What preparation is included