Brighton and Hove · England
Fire-rated sealant in Brunswick, Brighton and Hove
We cover Brunswick for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Fire seals that have cracked with movement
- Gaps where walls meet ceilings or slabs
- Joints picked up in a fire-stopping survey
Honest limits
Sealant is not the answer to every problem, and we’d rather say so up front. It will not solve:
- A wall that is not a fire-resisting element to begin with
- Openings too large for sealant, which need batts, boards or another system
- Problems with the door itself rather than the gap around the frame
If in doubt, phone 0345 464 0079 or email us and we will say what we think before you book.
Joints and surfaces we work on
- Plasterboard & masonry
- Service penetrations
- Pipe & cable gaps
- Door frames
- Linear gaps
- Flats & HMOs
Fire rated sealant in Brunswick
We often work from an action list drawn up by a fire risk assessor on buildings across Brunswick. If you share the list, we can quote for the gaps that need fire-rated sealant. We are often asked to deal with ordinary sealant used where a fire-rated product was needed and unsealed gaps where pipes and cables go through a wall, across plasterboard & masonry, service penetrations and door frames.
Community buildings, schools and small businesses around places like Brunswick have washrooms and kitchens that see a lot of use. Sealant and fire-rated joints there matter as much as in any larger building.
Whatever the size of the job, it’s backed by our one-year guarantee in Brunswick and across Brighton and Hove.
- Place
- Brunswick (BN1, BN3, BN50)
- Wider area
- Brighton and Hove
- Guarantee
- One year on every job
- Price
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Fire rated sealant in Brunswick: local notes
For seaside hotels, guest houses and holiday lets around Brunswick, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Brunswick has hotels and guest accommodation in and around it. Hotel work can be planned room by room, with out-of-hours working where needed.
Community buildings like St Stephen's Church are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking. Schools such as St Mary Magdalen Catholic Primary School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices. Rented homes near Brighton station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Brunswick is about 1 mile south-west of Brighton, in Brighton and Hove. For fire rated sealant in and around Brunswick, please ring 0345 464 0079 or drop us an email for a quick quote. We’re based in Crawley and cover Brighton and Hove, Brunswick included. Our area takes in 30 places across Brighton and Hove.
Jobs for fire rated sealant in BN1, BN3 and BN50 is quoted and booked the same way as anywhere else. We cover properties on Farm Road, York Road and Powis Road and the roads around them. Neighbouring places we cover for fire rated sealant include Seven Dials (1 mile north-east), West Hill (1 mile north-east), Prestonville (1 mile north), Hove (1 mile north-west) and Carlton Hill (1 mile east). Within a short drive, we also cover Hangleton (3 miles north-west), Patcham (3 miles north), Hollingbury (3 miles north), Bevendean (3 miles north-east), Saltdean (5 miles east) and East Saltdean (6 miles east). Being one of Brighton and Hove’s larger places, Brunswick has homes, rented property and businesses of every kind.
Near you in Brunswick
In Brunswick, that means homes and buildings near St. Ann's Well Gardens, Maris & Otter pub and The Drive Prep School, among other places. The nearest railway station is Brighton station, about 0.6 miles north-east. Nearby you’ll also find Old Police Cells Museum (0.7 miles south-east) and Churchill Square (less than half a mile east). Not far away are Whitehawk Hill and Newmarket Hill.
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Check whether a sealant can be painted before decorating over it
- Get damaged fire seals looked at promptly
- Include hidden areas like risers in routine checks
- Photograph sealed gaps before they’re covered up
Keep the record we give you with the building’s fire safety documents. It saves time at the next inspection or assessment.
An open gap is not only a fire issue: noise, draughts and even pests can come through too. Sealing them early helps on every front.
What happens on the day
All our tools and materials come with us in the van. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes from a few hours to a few days, depending on the number of gaps and the access. Parking around Brunswick is normally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- We record the locations and products used for your records.
Before we arrive
- For business premises, tell us about site rules or sign-in
- Let us know if you’ve seen damp or leaks
- Where the joints are inside, avoid wetting them before we arrive
Get a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand, and we will take it from there.
Read more
Surface by surface
Flats and HMOs
Converted houses often have gaps around old and new services. The gaps on your list are sealed with a fire-rated product and the locations noted.
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run leaving no stretch unsealed.
Should I try it myself first?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Why act early in Brunswick
Fire-rated sealants need more care than everyday sealant. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. Around Brunswick, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.
Why us?
- Domestic, commercial and hotel work
- One-year guarantee on every job
- 4.9 on Google from 180+ five-star reviews
- Arbo and Everbuild products
Read how sealant jobs are priced or our reviews.
Brunswick: your questions answered
Is Brunswick within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Brighton station. Can you help?
Yes, we work for landlords and agents. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before any work starts.
Will the old sealant be removed?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Can you tell me how many minutes the seal will last?
Ratings and certificates aren’t something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves.
Can you fill the gap behind a fire door frame?
Yes. We often seal open gaps hidden behind the architrave. The door and its fittings are a separate job for a door specialist.
What does intumescent mean?
Fire-rated sealant covers any sealant tested for use in fire stopping. Intumescent ones swell in heat, and they’re one of the options. The specification and the tested detail decide which is used.
Is there a guarantee?
Yes, for a year. If there’s a problem with our work in that time, tell us and we’ll put it right.
Where are you based?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Towns and villages near Brunswick
What else we do in Brunswick
How we quote for fire rated sealant
The quote reflects the job in front of us. We look at:
- How much there is to do
- How easy the joints are to reach
- The product the joint needs
- The old material and how stubborn it is
The cost reflects the work involved, not guesswork. That is why we ask a few questions first.
Asking for a quote
There’s no need for technical detail. Just tell us:
- Any access issues, like height or stairs
- Where the property is
- Whether it’s a home or a business
- How many joints, rooms or windows are involved
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.