West Sussex · England
Fire Rated Sealant in Broomer's Corner
Problem with your fire-stopping gaps in Broomer's Corner? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Gaps around pipes and cables through fire-resisting walls
- New service routes left unsealed after building work
- Standard silicone or caulk in a fire-stopping gap
What sealant work cannot fix
Honest advice matters more to us than a booking, so here’s what new sealant won’t do:
- Walls or floors that weren’t built to resist fire
- Big openings where sealant alone is not the tested solution
- Problems with the door itself rather than the gap around the frame
Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly before you book.
What we seal
- Pipe & cable gaps
- Door frames
- Flats & HMOs
- Linear gaps
- Service penetrations
- Plasterboard & masonry
Fire rated sealant in Broomer's Corner
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. If you have seals cut through by electricians, plumbers or data installers and cracked or shrunken fire-rated sealant, we can put it right.
In a village or hamlet like Broomer's Corner, commercial work is more likely to be a pub, a farm shop, holiday lets or a village hall than an office block. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Each job carries a 12-month guarantee.
- Location
- Broomer's Corner (RH13)
- Wider area
- West Sussex
- Guarantee
- 12 months on all our work
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
FAQs for Broomer's Corner
Is Broomer's Corner in your area for fire rated sealant?
Yes. Our work covers London and the South East, and Broomer's Corner is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear price.
I let a flat near Billingshurst station. Can you help?
Yes, we work for landlords and letting agents. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear quote.
Is intumescent sealant the same as fire-rated sealant?
An intumescent sealant expands when it gets hot. Intumescent sealants are one kind of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
Can I choose the sealant colour?
We’ll suggest a colour to suit the surroundings. The choice depends on the product the joint needs.
What does fire rated sealant cost?
We do not publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before we start.
Which products do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we’ll tell you what we are using.
Can I use normal mastic around a pipe through a fire wall?
No. It might close the gap, but it isn’t a fire-rated seal. A tested fire-rated product is needed.
Where is Mr Mastic based?
We’re based in Crawley, and we cover South East England, London and all of Scotland.
What affects the cost of fire rated sealant
There’s no set price list, because jobs vary so much. What we look at:
- How easy the joints are to reach
- How many rooms, windows or areas are involved
- How much old sealant there is and how hard it is to remove
- Any working-time requirements on site
What you pay reflects the work, not guesswork. That is why we ask a few questions first and give you a clear price before work begins.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- Whether it’s a home or a business
- A few photos by email, if you can
- How many joints, rooms or windows are involved
- What’s wrong with the joints now
To get a quote, call 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.
Work for landlords, hotels and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
We also work for property managers and facilities teams. Several sites can go on one quote, and we’re fully insured.
Commercial buildings in Broomer's Corner
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
Schools such as William Penn School are buildings too, and fire-stopping around service openings should be restored whenever new services go in. If you let a flat or house near Billingshurst station, any gap left by new services in shared walls should be closed with a fire-rated product.
Broomer's Corner is about 7 miles south-west of Horsham, in West Sussex. Anywhere in RH13, we can carry out fire rated sealant at your property. Broomer's Corner is one of 371 towns and villages in West Sussex where we work for fire rated sealant. There’s also a page for Crawley, about 13 miles away.
Jobs for fire rated sealant in RH13 is quoted and booked the same way as anywhere else. Streets in the area include Saucelands Lane, Sincox Lane and Hooklands Lane, and we cover them all. Neighbouring places we cover for fire rated sealant include Whitehall (1 mile east), Shipley (1 mile north-east), Dragons Green (2 miles north-east), Dial Post (2 miles south-east) and Ashington (3 miles south). We also work in nearby towns such as Crawley (13 miles north-east), Horsham (7 miles north-east), Worthing (11 miles south), Haywards Heath (13 miles east), Burgess Hill (12 miles east) and Littlehampton (13 miles south-west).
Around Broomer's Corner
Broomer's Corner’s nearest station is Billingshurst station, roughly 3.4 miles north-west. For a walk, there’s Knepp Wildland.
What happens on the day
A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, do the work and tidy away. It normally takes anything from a few hours to several days, depending on how many gaps there are. Somewhere like Broomer's Corner needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Tell us about any water getting in
- Let us know about earlier repairs to the joints
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you’re ready, ring 0345 464 0079 or send us an email.
Related advice
Do you need fire rated sealant in Broomer's Corner?
Sealant applied too thin, without the backing its detail needs, or onto dust will not perform as it was tested. We see plenty of fire stopping that was hurried, especially where it was squeezed in at the end of a project.
These are the problems we are asked about most:
- Linear gaps at the head of walls
- Sealant items on a fire risk assessment action list
- Old fire sealant that has split or come away
- Unsealed gaps around fire door frames
Community buildings like St Mary's Mission Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Before booking anyone
- What the cure time is
- What the quote includes, VAT included or not
- Whether you can choose the colour
- What guarantee comes with the work
How the job changes by surface
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run so there are no open sections left.
Door frames
Behind most architraves is a gap between frame and wall. Where it’s open, we seal it to the product’s details for that gap size.
Nearby places to Broomer's Corner
Also in Broomer's Corner
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so tell us about it when you ask for a quote.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.