Essex · England
Brantham Fire Rated Sealant
Professional fire rated sealant in and around Brantham, with every bit of old sealant taken out first and a one-year guarantee.
- Gaps around pipes and cables through fire-resisting walls
- Gaps flagged on a fire risk assessment
- Seals cut through by electricians, plumbers or data installers
Fire rated sealant in Brantham
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate. We are often asked to deal with seals cut through by electricians, plumbers or data installers and old fire sealant that has split or come away, across pipe & cable gaps, door frames and service penetrations.
Somewhere as small as Brantham, commercial jobs tend to be pubs, holiday lets, farm buildings or halls rather than offices. Each still needs sound sealant in its washrooms and kitchens, and fire-rated joints where services pass through walls.
Your job is guaranteed for a year, as with all our work.
- Place
- Brantham (CO11)
- Region
- Essex
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
For landlords and businesses
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
If you manage several properties in or around Brantham, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and pictures by email help.
What fire rated sealant looks like in Brantham
If you run a hotel, guest house or holiday let in a coastal place like Brantham, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a church, hall or community building such as Church of St Michael and All Angels, gaps around pipes and cables are worth checking after any building work there. Letting a property close to Manningtree station? Then any gap left by new services in shared walls should be closed with a fire-rated product.
Brantham is in Essex. We carry out fire rated sealant for homeowners, landlords and businesses in Brantham and nearby. Brantham is one of 644 towns and villages in Essex we cover for fire rated sealant. There’s also a page for Chelmsford, roughly 29 miles from Brantham.
All of CO11 is covered for fire rated sealant. We cover properties on The Street, Birch Drive and Blenheim Close. Main roads around Brantham include the A137, which makes travel easy. Nearby, we also carry out fire rated sealant in Cattawade (1 mile south), East End (1 mile north-west), Manningtree (2 miles south), Lawford (2 miles south) and Mistley (2 miles south-east). We also work in nearby towns such as Colchester (9 miles south-west), Clacton-on-Sea (12 miles south), Harwich (9 miles east), Camulodunum (10 miles south-west), Greenstead (8 miles south-west) and Wivenhoe (9 miles south-west).
Around Brantham
Around Brantham, our work takes us to homes and buildings near The Ark pub and Manningtree High School, among other places. The nearest railway station is Manningtree station, about 1.5 miles south-west. Well-known places in the area include The Munnings Museum (3.2 miles west) and Little Wenham Castle (3.5 miles north-west). The countryside around Brantham includes Cattawade Marshes and Alton Water.
Places near Brantham
Other services in Brantham
FAQs for Brantham
Can you help a landlord with a rental near Manningtree station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Do you cover Brantham for fire rated sealant?
Yes, Brantham is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or drop us an email and tell us what needs doing, and we’ll give you a clear quote.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Can new sealant go over the old?
No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Can you give us a record of the work?
Yes. Locations and products are written up when we finish. Tell us if your assessor needs it in a particular format.
Can ordinary silicone be used in a fire-stopping gap?
No. Where a fire-rated seal is needed, it has to be a product tested for that use.
Can you match the sealant colour?
Most of the time, yes. We’ll tell you which colours the right product comes in.
Do you need fire rated sealant in Brantham?
Over time, buildings change layout and use. A house turned into flats or an HMO, or an office split into smaller units, brings new walls, new service routes and new gaps.
People usually contact us after spotting one of these:
- Gaps flagged on a fire risk assessment
- Gaps where walls meet ceilings or slabs
- Cracked or shrunken fire-rated sealant
- Open holes round services passing through fire walls
If you look after a building such as Brooklands Primary School, fire-stopping around service openings should be restored whenever new services go in.
Before booking anyone
- Who turns up on the day
- How the joint is cleaned and prepared
- Whether they’re fully insured
- Is the old sealant removed completely?
Keeping the joints in good condition
Simple care keeps the joints in good condition. Our advice:
- Ask every contractor to reseal any fire stopping they disturb
- Check whether a sealant can be painted before decorating over it
- Flag any open gap you spot round a pipe or cable
- Take pictures of fire stopping before ceilings or boxing go back
Let contractors know where fire stopping has been done, and make sure anything they disturb is resealed with a suitable product. Later work is a common cause of damaged fire stopping.
A gap left open in a fire-resisting wall or floor lets smoke spread in ways the building wasn’t designed for. Closing it is generally a straightforward job.
How we quote for fire rated sealant
We quote each job individually. These are the things that affect it:
- Whether there’s mould to deal with
- The old material and how stubborn it is
- Working hours on commercial sites
- How many areas need sealing
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we will explain the quote if you ask.
What we need to know
When you call or email, it’s useful to know:
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it has been sealed before
- Any access issues, like height or stairs
We quote each job on its own, so the first step is telling us about yours. Just phone 0345 464 0079 or email us with the details, and pictures are welcome.
Why it’s worth doing now in Brantham
For some gaps, sealant isn’t the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. We will say so if a gap needs something other than sealant. Older cottages and farmhouses around Brantham can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
Combining jobs into one visit is normally more efficient than separate visits. You’ll get one clear quote for the whole job.
Why choose Mr Mastic in Brantham
- Anti-fungal silicone where joints get wet
- Fully insured
- Every job guaranteed for a year
- Approved under the ARBOMaster scheme
See what affects the cost and what customers say.
How it works
We bring everything the job needs with us, so there’s nothing for you to buy. After a quick look at the joints together, the area is protected and the work begins. It normally takes from a few hours to a few days, depending on the number of gaps and the access. In a small place like Brantham, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Getting ready for the visit
- Mention if the joints have been sealed before
- Move anything stored near the joints
- Mention any tricky access
Get a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand.