Essex · England
Fire Rated Sealant in Cattawade
We cover Cattawade for intumescent and fire-rated sealant around gaps, frames and service penetrations. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Gaps flagged on a fire risk assessment
- Gaps filled with a product that isn’t fire-rated
- Gaps left after a refit or conversion
Fire rated sealant for homes and businesses in Cattawade
Deciding which gaps need fire stopping isn’t our role; that comes from your fire risk assessor, designer or building control. What we do is apply the right product to that specification, properly and neatly. Common call-outs are for cracked or shrunken fire-rated sealant and ordinary sealant used where a fire-rated product was needed, on flats & HMOs, plasterboard & masonry and pipe & cable gaps.
For a small place like Cattawade, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.
There’s a 12-month guarantee on every job, large or small.
- Location
- Cattawade (CO11)
- Wider area
- Essex
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Can I do it myself?
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
Places near Cattawade
Other services in Cattawade
Questions from Cattawade
Do you cover smaller places like Cattawade?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Is Cattawade in your area for fire rated sealant?
Yes. Our work covers London and the South East, and Cattawade is part of that. Just call 0345 464 0079 or send us an email with a few details of the job, and we will give you a clear quote.
Can tenants book the work?
Of course. Check with your landlord; we can send the quote to them too.
Where do you work from?
Our base is in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
What’s the difference between intumescent and fire-rated sealant?
Intumescent means it swells when heated, helping close the gap. It’s one type of fire-rated sealant; which product suits depends on the gap, the substrate and the service.
Will the old sealant be removed?
Yes. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
What should I tell you?
Tell us what needs doing and where. We’ll ask anything else we need to know.
Can you work in occupied buildings?
Yes, in flats, HMOs, schools, offices and other buildings, occupied or empty. Tell us how the building is used and we will plan around it.
Fire rated sealant around Cattawade
If you run a hotel, guest house or holiday let in a coastal place like Cattawade, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Letting a property close to Manningtree station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Schools such as Brooklands Primary School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment.
Cattawade is in Essex. Jobs in Cattawade get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Cattawade is one of 644 towns and villages in Essex where we work for fire rated sealant. For nearby work, see our Chelmsford page.
Our applicators cover all of the CO11 postcode area for fire rated sealant and the streets around it. Local streets include Temple Pattle, Grimwade Close and Hardy Close. Nearby, we also carry out fire rated sealant in Brantham (1 mile north), East End (1 mile north), Manningtree (1 mile south), Lawford (1 mile south) and Mistley (2 miles south-east). We also work in nearby towns such as Colchester (8 miles south-west), Clacton-on-Sea (12 miles south), Harwich (9 miles east), Camulodunum (10 miles south-west), Greenstead (7 miles south-west) and Wivenhoe (8 miles south-west).
Landmarks near Cattawade
Around Cattawade, our work takes us to homes and buildings near The Ark pub and Manningtree High School and the streets around them. The closest station to Cattawade is Manningtree station, roughly 1 mile south-west of the centre. A little further out are Little Wenham Castle (3.8 miles north) and The Munnings Museum (2.9 miles west). For a walk, there’s Cattawade Marshes and Alton Water.
What affects the quote in Cattawade
Call for a quick quote. What matters most is:
- Whether old sealant or filler has to be cut out
- The number and length of the joints
- Whether the work is at height
- The number of rooms or windows
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we’ll explain the quote if you ask.
What we need to know
Photos help, but a description is a good start. Try to tell us:
- Where the job is, and your postcode
- What’s wrong with the joints now
- A few pictures by email, if you can
- How many joints, rooms or windows are involved
We do not publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, call 0345 464 0079 or email us.
Different surfaces, different methods
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. We seal it with a product tested for that service and gap size.
Linear gaps
Linear gaps run along the head of walls, at floor edges and between panels. They’re sealed with a fire-rated sealant over backing where the detail calls for it.
Aftercare tips
Simple care keeps the joints in good condition. We recommend:
- Allow for resealing whenever new services are run
- Report cracked or damaged seals as soon as you notice them
- Keep general-purpose foam and caulk away from fire-stopping gaps
- Ask which product was used before you paint
Follow the cure time we give you before decorating over the sealant. Not every fire-rated sealant takes paint, so ask us which we used.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
What we are called out for in Cattawade
A lot of fire stopping is out of sight: in ceiling voids, service risers and behind boxing. Because nobody sees it, gaps go unnoticed until an assessor or surveyor looks.
The most common problems we see are:
- Sealant items on a fire risk assessment action list
- Gaps around pipes and cables through fire-resisting walls
- Cracked or shrunken fire-rated sealant
- Ordinary sealant used where a fire-rated product was needed
For buildings such as Church of St Michael and All Angels, older buildings that have had new heating or wiring often have service gaps worth checking.
Before booking anyone
- What preparation is included
- What product goes in the joint
- How long the guarantee is
- Whether they’re fully insured
How it works
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. It generally takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Cattawade needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products.
Preparing for the visit
- Tell us if parking is tricky
- For indoor joints, keep the area dry beforehand if you can
- Let us know about stairs, lifts or work at height
Getting a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. When it suits you, ring 0345 464 0079 or drop us an email.
Related advice
Why act early in Cattawade
Items left open on a fire risk assessment tend to come back at the next review. Having them sealed and recorded now gives you evidence that the item was dealt with. In a small place like Cattawade, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, phone 0345 464 0079 or drop us an email for an honest opinion and a quote.
Why Cattawade clients choose us
- Approved under the ARBOMaster scheme
- Homes, businesses and hotels
- Anti-fungal silicone where joints get wet
- 4.9 on Google from 180+ five-star reviews
See our cost guide and our reviews.