Surrey · England
Bramshott Chase Fire Rated Sealant
Fire-stopping gaps in Bramshott Chase need attention? We cut out the old, prepare the joints and apply the right sealant.
- Gaps filled with a product that is not fire-rated
- Door frames with gaps between frame and wall
- Cracked or shrunken fire-rated sealant
Fire rated sealant around Bramshott Chase
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Schools such as Woolmer Hill School are buildings too, and fire-stopping around service openings should be restored whenever new services go in. For buildings such as Church of St Luke, older buildings that have had new heating or wiring often have service gaps worth checking.
Bramshott Chase is about 8 miles south of Farnham, in Surrey. We provide fire rated sealant to homeowners, landlords and businesses in Bramshott Chase and the surrounding area. Bramshott Chase is one of 395 places in Surrey we cover. We also work in Portsmouth, about 24 miles from Bramshott Chase.
We cover every part of GU26 for fire rated sealant. If you need fire rated sealant at a property on Upper Hammer Lane, Old Bramshott Chase and Portsmouth Road or anywhere close by, our applicators can take on the job. Other places close to Bramshott Chase include Hammer Bottom (1 mile south), Hammer (1 mile south), Shottermill (1 mile south-east), Woolmer Hill (1 mile south) and Haslemere (2 miles south-east). We also work in nearby towns such as Guildford (13 miles north-east), Farnham (8 miles north), Frimley (15 miles north), Cranleigh (12 miles east), Ash (10 miles north) and Godalming (9 miles north-east).
Around Bramshott Chase
Around Bramshott Chase, our work takes us to homes and buildings near Shottermill Junior School and The Prince of Wales pub and the streets around them. For rail, the closest station is Haslemere station, roughly 1.7 miles east of the centre. Nearby you will also find Haslemere and District Hospital (2.1 miles east). For a walk, there’s Upper Lake and Gibbet Hill.
Fire rated sealant in Bramshott Chase, done properly
Fire stopping only performs as intended if it’s done to the detail: correct depth, correct backing and a product suited to the surfaces. That detail is what we take care over, one gap at a time. If you have unsealed gaps where pipes and cables go through a wall and ordinary sealant used where a fire-rated product was needed, we can help.
For a small place like Bramshott Chase, the journey and timings are agreed in advance, so the job can fit around bookings, guests or opening times where possible.
All our work comes with a one-year guarantee, wherever you are in Surrey.
- Place
- Bramshott Chase (GU26)
- Region
- Surrey
- Guarantee
- One year on every job
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What affects the cost of fire rated sealant
The quote reflects the job in front of us. We take into account:
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
- Any working-time requirements on site
- Any mould that needs treating
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Asking for a quote
Photos by email are helpful but not essential. Please mention:
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
- What’s wrong with the joints now
- If it’s domestic, commercial or a hotel
For fire rated sealant in Bramshott Chase, ring 0345 464 0079 or email us. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Common problems we fix in Bramshott Chase
Sometimes the wrong product was used from the start: ordinary expanding foam, standard silicone or decorators’ caulk in a place that needed a tested fire seal. It may look fine, but it is not a fire-rated seal.
The most common problems we see are:
- Fire seals that have cracked with movement
- Joints picked up in a fire-stopping survey
- Unsealed gaps where pipes and cables go through a wall
- Door frames with gaps between frame and wall
Rented homes near Haslemere station change hands often, and fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Before you book anyone
- How long the guarantee is
- How long to leave it before use
- How the surfaces are prepared before sealing
- Is VAT in the price?
Different surfaces, different methods
Flats and HMOs
In flats and HMOs, the walls and floors between homes and common areas need sealing where services pass through. We work through the gaps on your assessment room by room.
Service penetrations
A copper pipe, a cable and a plastic pipe can all need different fire-stopping details. We follow the manufacturer’s tested detail for each.
What sealant work can’t fix
New sealant can’t fix everything, and we’ll tell you before we start. It will not solve:
- Construction that doesn’t provide fire resistance on its own
- Problems with the door itself rather than the gap around the frame
- Openings too large for sealant, which need batts, boards or another system
If you are not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer before booking.
Surfaces we seal
- Door frames
- Linear gaps
- Pipe & cable gaps
- Plasterboard & masonry
- Service penetrations
- Flats & HMOs
Should I try it myself first?
A DIY attempt doesn’t rule out a professional job. We cut it out and start again.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Work for landlords, hotels and businesses
If you manage several properties in or around Bramshott Chase, jobs at different addresses can be quoted together. Send us the addresses and the work at each.
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
What we do, step by step
We keep the work tidy and contained to the joints we’re treating, so you can carry on as normal. Expect the work to take from a few hours to a few days, depending on the number of gaps and the access. Somewhere as small as Bramshott Chase, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start with the survey or action list, checking the size and surfaces of every gap.
- We remove any old or unsuitable filler and clean the gap.
- We put in whatever backing or fill the product detail specifies.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Locations and products are noted so you have them on file.
How to prepare
- Clear the area around the work
- Mention if the joints have been sealed before
- For business premises, tell us about site rules or sign-in
Get a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will talk you through the work.
Related advice
Nearby places to Bramshott Chase
Other services in Bramshott Chase
FAQs for Bramshott Chase
Do you cover smaller places like Bramshott Chase?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Haslemere station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear price.
What should I tell you?
Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply call 0345 464 0079 or email us.
What sealant do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
Do you carry out fire risk assessments?
No, assessment is not something we do. Once you have a specification or action list from your assessor or designer, we will quote for the sealant work on it.
Is it OK to seal over old sealant?
No, it will not last. It may look fine at first, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Do you work in flats, HMOs and commercial buildings?
Yes, whether the building is a school, an office, flats or an HMO, and whether it’s in use or not. Tell us how the building is used and we’ll plan around it.
Do you seal gaps around fire door frames?
Yes. We often seal open gaps hidden behind the architrave. The door and its fittings are a separate job for a door specialist.