Hampshire · England
Fire-rated sealant in Baughurst, Hampshire
Problem with your fire-stopping gaps in Baughurst? We remove the old material, prepare the joints and seal them properly.
- Gaps where walls meet ceilings or slabs
- Unsealed gaps around fire door frames
- Gaps around pipes and cables through fire-resisting walls
For landlords and businesses
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
Fire rated sealant in Baughurst
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate, with a record of the products and locations if you need one. Common call-outs are for open holes round services passing through fire walls and gaps left after a refit or conversion, across flats & HMOs, door frames and linear gaps.
For holiday lets, converted business premises or a community building near Baughurst, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
All of our work is guaranteed for twelve months.
- Place
- Baughurst (RG26)
- Region
- Hampshire
- Cover
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Honest limits
To be straight with you, some problems need a different trade:
- Doors that are not fire doors in the first place
- Fire risk assessments, which need a qualified assessor
- Sign-off of the building, which sits with building control or your assessor
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly.
Joints and surfaces we work on
- Service penetrations
- Plasterboard & masonry
- Flats & HMOs
- Pipe & cable gaps
- Door frames
- Linear gaps
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. We suggest:
- Tell trades working in the building that fire seals must be put back
- Flag any open gap you spot round a pipe or cable
- Never patch a fire seal with standard sealant
- Keep the record of products and locations with your fire safety documents
Look at the sealed gaps as part of your routine walk-rounds. Look for cracks, gaps or sealant that has been cut or pulled out and get them seen to.
Any job that breaks through a wall or ceiling should include resealing. Doing it at the time avoids leaving gaps behind.
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Different surfaces, different methods
Service penetrations
Pipes, cables and ducts passing through fire-resisting walls and floors each leave a gap. We seal it with a product tested for that service and gap size.
Linear gaps
A linear joint may need to allow for movement as well as fire. We choose a product and depth that suit the gap and the movement, following the tested detail.
What fire rated sealant looks like in Baughurst
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Schools such as The Hurst School are buildings too, and gaps opened by contractors for new cabling are a common finding in schools and offices. For landlords with property near Midgham station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Community buildings like Saint Mary's Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.
Baughurst is about 1 mile west of Tadley, in Hampshire. Our applicators cover fire rated sealant for householders, landlords and businesses in Baughurst and the surrounding area. Our area takes in 683 places across Hampshire. There’s also a page for Reading, about 11 miles away.
Jobs for fire rated sealant in RG26 works the same way as everywhere else we cover. If you need fire rated sealant at a property on Blackthorn Close, Brimpton Road and Wolverton Road or anywhere close by, our applicators can take on the job. We also cover the places around Baughurst: Inhurst (1 mile north-west), Heath End (1 mile north), Axmansford (1 mile south-west), Tadley (1 mile east) and Brimpton Common (1 mile north-west). We also work in nearby towns such as Basingstoke (7 miles south-east), Fleet (15 miles east), Yateley (14 miles east), Hook (10 miles south-east), Popley (6 miles south-east) and Kempshott (8 miles south).
Around Baughurst
Locally, jobs take us to homes and businesses close to Wellington Arms Public House and Burnham Copse Primary School and the streets around them. Baughurst’s nearest station is Midgham station, roughly 3.1 miles north. A little further out are Park Prewett Hospital (5.4 miles south-east) and Calleva Museum (3 miles east).
Nearby places to Baughurst
Also in Baughurst
Baughurst: your questions answered
Can you help a landlord with a rental near Midgham station?
Yes. We work for landlords and letting agents as well as homeowners. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
Is Baughurst in your area for fire rated sealant?
Yes, Baughurst is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or email us and let us know what needs doing, and we will give you a clear price.
What information do you need?
Let us know what needs doing and where. We’ll ask anything else we need to know.
Are you insured?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
Where are you based?
Our base is in Crawley, and we work across South East England, London and Scotland.
Can you tell me which gaps need fire stopping?
No. Your fire risk assessor, designer or building control decides that. Our job is applying the sealant to their specification.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
How long does the job take?
A typical job takes from a few hours to a few days, depending on the number of gaps and the access. Your quote will say how long we expect yours to take.
What affects the cost of fire rated sealant
Jobs vary more than people expect. What affects the quote:
- The number and length of the joints
- The number of rooms or windows
- The product the joint needs
- Any working-time requirements on site
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first.
What we need to know
Photos by email are helpful but not essential. Please mention:
- Roughly how big the job is
- How we’d reach the joints
- Any previous sealing or DIY work
- If it’s domestic, commercial or a hotel
We do not publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To get started, phone 0345 464 0079 or email us.
How the visit works
At the end, we look at the finished work together. The work normally takes a few hours for a handful of gaps, and longer for a whole building, depending on the size of the job. Somewhere like Baughurst needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Getting ready for the visit
- Clear the area around the work
- Mention any leaks or damp you’ve noticed
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.