Scotland
Fire Rated Sealant in Clackmannanshire
Covering 16 places across Clackmannanshire for fire rated sealant, with every joint properly prepared, quoted clearly before any work starts and a one-year guarantee.
Fire rated sealant in every part of Clackmannanshire
Intumescent and fire-rated sealant around gaps, frames and service penetrations. Pick your town below to see the details for your area, or call or email us for a quick quote.
Biggest towns in Clackmannanshire
What else we do in Clackmannanshire
- Bathroom & kitchen resealing
- Remedial sealant & repairs
- Floor & skirting joints
- New-build mastic & snagging
- Regrouting
- Gutter, fascia & soffit sealing
- Window & door mastic
- External & façade joints
- Sand mastic for sash & case windows
- Glazing & conservatory sealant
- Commercial & hotel sealant
Postcode districts
How fire rated sealant works in Clackmannanshire
Deciding which gaps need fire stopping isn’t our role; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We’re often asked to deal with linear gaps at the head of walls and unsealed gaps where pipes and cables go through a wall, across linear gaps, pipe & cable gaps and flats & HMOs.
When we arrive, we start by going over the job with you, so you know exactly what we’re doing. Surfaces next to the work are protected before any work begins. The work normally takes anything from a few hours to several days, depending on how many gaps there are.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Where the tested detail needs backing or fill, we fit it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- We record the locations and products used for your records.
How we quote
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.
Why clients in Clackmannanshire choose us
- We’re fully insured
- Trusted Arbo and Everbuild sealants
- A 12-month guarantee on all work
- Approved under the ARBOMaster scheme
Ask for a quote
Getting a quote is simple: tell us what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll take it from there.
What’s near Alloa
We work in homes and buildings around Alloa North Church, Alloa Academy and The Bobbing John pub, among other places. There’s a railway station in Alloa itself: Alloa station. Well-known places in the area include Old Tulliallan Castle (3.8 miles south-east) and Alloa Museum And Gallery (within half a mile south). For a walk, there’s Black Devon Wetlands RSPB Reserve and Myreton Hill.
Fire rated sealant across Clackmannanshire: local notes
From Alloa, Tullibody and Tillicoultry to its smaller places, Clackmannanshire has workplaces, hotels and schools with joints to look after, from washroom silicone to fire-rated sealant around service openings.
Scotland has its own building regulations, and homes here bring their own details: sash and case windows, harled walls and, in the towns and cities, tenement flats. Clackmannanshire is part of the area we cover across Scotland. Along the coast in Clackmannanshire, holiday lets and guest houses can have bathrooms in near-constant use, so their sealant and grout wear faster than most.
Alloa: Schools such as Alloa Academy are buildings too, and fire-stopping around service openings should be restored whenever new services go in. For buildings such as Alloa North Church, service openings in its walls need the right fire-rated sealant, as in any building.
Why it fails
Buildings are refitted and reconfigured over the years. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
Common reasons people contact us are:
- Gaps around pipes and cables through fire-resisting walls
- Linear gaps at the head of walls
- Cracked or shrunken fire-rated sealant
- Unsealed gaps around fire door frames
What happens if it’s left?
Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own that doesn’t depend on other work.
Questions to ask before booking
- The length of the guarantee
- How long to leave it before use
- What the quote includes, VAT included or not
- Who does the work, and how experienced they are
Different surfaces, different methods
Plasterboard walls
Plasterboard partitions are common in flats, offices and conversions. The sealant has to be one tested in plasterboard for the gap we’re sealing.
Masonry and concrete
Preparation counts on brick, block and concrete. The gap is cleaned and backed where required.
What affects the cost of fire rated sealant
Jobs vary more than people expect. The main factors:
- Which sealant suits the joint
- Whether there’s mould to deal with
- The number and length of the joints
- Whether the work is at height
Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you are unsure, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
What to tell us for a quote
What to tell us when you ask for a quote:
- Photos by email, if that is easy
- The rough size of the job
- Where the job is, and your postcode
- Whether it has been sealed before
If you’re in Clackmannanshire and need fire rated sealant, send an email to info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
What sealant work can’t fix
We won’t take on work that won’t last, so here’s what sealant can’t put right:
- Walls or floors that weren’t built to resist fire
- Assessing a building’s fire safety
- Certifying a building or signing off its fire safety
Your questions about fire rated sealant in Clackmannanshire
What do you put in the joint?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We will tell you what we are using and why.
Do the sealants smell?
There can be a smell while the sealant cures. Opening a window helps.
Can you tell me how many minutes the seal will last?
Ratings and certification sit with the product’s test evidence and whoever specified the work. We apply the specified product to the manufacturer’s details and list the locations and products for you.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Do you work in flats, HMOs and commercial buildings?
Yes. We regularly work in flats, HMOs, schools and offices while they’re in use. Out-of-hours work can be arranged if that suits the building.
Will you leave a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
How long does the job take?
Most jobs take a few hours for a handful of gaps, and longer for a whole building. Your quote will say how long we expect yours to take.