Dumfries and Galloway · Scotland

Fire-rated sealant in Annan, Dumfries and Galloway

Intumescent and fire-rated sealant around gaps, frames and service penetrations for Annan, backed by a 12-month guarantee. Call for a quick quote.

  • Seals cut through by electricians, plumbers or data installers
  • Open holes round services passing through fire walls
  • Door frames with gaps between frame and wall

Fire rated sealant for Annan homes and businesses

Fire rated sealant in Annan

Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. Those are the gaps we close, using a tested fire-rated product. We work on service penetrations, linear gaps and flats & HMOs, and the jobs we see most are open gaps behind door architraves and unsealed gaps where pipes and cables go through a wall.

For a place like Annan, the journey and timings are planned in advance, so it can be fitted around bookings or opening times where possible.

Each job carries a 12-month guarantee, large or small.

Place
Annan (DG12)
Wider area
Dumfries and Galloway
Guarantee
12 months on all our work
Quotes
A clear quote up front
Email
info@mrmastic.co.uk
Last updated
26 October 2026
The Mr Mastic team in navy uniforms in front of three Mr Mastic vans

What we can’t put right

In fairness, there are a few things sealant will not fix:

  • Fire risk assessments, which need a qualified assessor
  • Fire doors that need new seals, closers or hardware
  • Big openings where sealant alone is not the tested solution

Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly before you book.

Where we work in Annan

  • Door frames
  • Service penetrations
  • Plasterboard & masonry
  • Linear gaps
  • Flats & HMOs
  • Pipe & cable gaps

What fire rated sealant looks like in Annan

If you run a hotel, guest house or holiday let in a coastal place like Annan, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details; we don’t certify buildings or carry out fire risk assessments.

If you look after a building such as Annan Academy, gaps opened by contractors for new cabling are a common finding in schools and offices. Letting a property close to Annan station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. Community buildings like Old Parish Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building.

Annan is in Dumfries and Galloway. Jobs in Annan get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Across Dumfries and Galloway, we cover 138 places, Annan among them. For nearby work, see our Edinburgh page.

Work in DG12 works the same way as everywhere else we cover. We cover properties on High Street, Station Road and Latimer Road and the roads around them. Annan sits on or near the A75 and B721, so getting to you is simple. If you’re just outside Annan, we cover Howes (1 mile west), Newbie (1 mile south-west), Dornock (2 miles east), Brydekirk (2 miles north) and Powfoot (3 miles west). We also work in nearby towns such as Dumfries (15 miles west), Lockerbie (10 miles north-west), Heathhall (15 miles north-west), Langholm (15 miles north-east), Gretna (7 miles east) and Lochmaben (12 miles north-west). Being one of Dumfries and Galloway’s larger places, Annan has homes, rented property and businesses of every kind.

What’s near Annan

Around Annan, our work takes us to homes and buildings near The Commercial Inn. Annan’s nearest station is Annan station, about 0.5 miles south-west of the centre. Nearby you’ll also find Annan Hospital (less than half a mile east) and Annan Castle (under half a mile west). Green spaces nearby include Campfield Marsh RSPB reserve.

Map of Annan © OpenStreetMap contributors

How the job changes by surface

Linear gaps

Head-of-wall gaps are often hidden above suspended ceilings. We seal them along their full length.

Door frames

Frame gaps are generally hidden behind the architrave. We seal any open gap to the product’s tested details so the architrave can be refitted.

Annan: your questions answered

Can you help a landlord with a rental near Annan station?

Yes, we work for landlords and letting agents. You can send an email to info@mrmastic.co.uk with the address and a few details, and we’ll give you a fixed price before we start.

How do Scotland’s building regulations apply to fire-rated sealant in Annan?

Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We do not certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.

Will you assess my building’s fire safety?

No. We follow the requirements from your assessor, designer or building control, and apply each product to its tested details.

What does intumescent mean?

An intumescent sealant expands when it gets hot, helping close the gap. It’s one type of fire-rated sealant; the right one depends on the gap and what passes through it.

Do you cover Annan?

Yes. From our base in Crawley, we cover South East England, London and all of Scotland.

Can you quote for more than one area?

Yes, and it often makes sense. Combining jobs makes good use of the visit.

Is it messy?

We keep the work tidy. We protect what’s around the joints.

Can ordinary silicone be used in a fire-stopping gap?

No. It might close the gap, but it is not a fire-rated seal. Use a product tested for that gap and service, or ask us to do it.

What we do, step by step

We work through the job in order: protect, prepare, seal, tidy. Typically it takes a few hours for a handful of gaps, and longer for a whole building. Outdoor work around Annan depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.

  1. Before starting, we go through the specification or action list with you.
  2. Each gap is measured and its substrate and service noted.
  3. Unsuitable material such as ordinary foam or silicone is cut out.
  4. We fit backing where needed and apply the fire-rated sealant to depth.
  5. Every location is recorded with the product used for your records.

Getting ready for the visit

  • For indoor joints, keep the area dry beforehand if you can
  • Tell us about any water getting in
  • Clear the area around the work

Getting a quote

There’s no standard price list. Instead, your job gets its own clear quote. To get started, drop us a line at info@mrmastic.co.uk.

Get a price

Read more

Leave it or put it right?

Fire-rated sealants need more care than everyday sealant. Depth, backing and surface preparation all affect how a seal performs, so we follow the maker’s details on every gap. In a place like Annan, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.

Leaving a failed joint generally makes the job bigger, not smaller. If you are unsure, email us at info@mrmastic.co.uk and we will give you an honest view and a quote.

Why Annan clients choose us

  • We never seal over old sealant
  • 12-month guarantee on every job
  • We leave the area clean and tidy
  • 20+ years of sealant experience

Read how sealant jobs are priced or our reviews.

Keeping the joints in good condition

Simple care keeps the joints in good condition. Our advice:

  • Make resealing part of every contractor’s brief
  • Take pictures of fire stopping before ceilings or boxing go back
  • Keep the record of products and locations with your fire safety documents
  • Plan fire stopping into any work that goes through walls or floors

Let contractors know where fire stopping has been done, and ask them to reseal anything they cut through. A lot of damaged fire stopping comes from later work.

An open gap isn’t only a fire issue: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.

Can I do it myself?

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.

What affects the quote in Annan

The price is agreed before any work begins. It takes into account:

  • The number of rooms or windows
  • The type of sealant required
  • How easy the joints are to reach
  • Working hours on commercial sites

Combining jobs into one visit generally makes better use of the time than several visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.

Asking for a quote

Photos help, but a description is a good start. Try to tell us:

  • A few photos by email, if you can
  • Where the job is, and your postcode
  • Any access issues, like height or stairs
  • How many joints, rooms or windows are involved

Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll take it from there.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job