Surrey · England
Fire-rated sealant in Albury, Surrey
Intumescent and fire-rated sealant around gaps, frames and service penetrations for householders, landlords and businesses in Albury. Fully insured, ARBOMaster approved and guaranteed for a year.
- Gaps around pipes and cables through fire-resisting walls
- Joints picked up in a fire-stopping survey
- Standard silicone or caulk in a fire-stopping gap
About our fire rated sealant in Albury
We do not assess buildings or decide what fire stopping is needed; that comes from your fire risk assessor, designer or building control. Our part is applying the specified sealant carefully, to the right depth and with the right backing. If you are dealing with open joints along the top of partitions and fire seals that have cracked with movement, we can help.
Work in a small place like Albury is planned ahead, journey included, so it can be fitted around guests, clients or events where possible.
There’s a 12-month guarantee on every job, large or small.
- Location
- Albury (GU5)
- Wider area
- Surrey
- Cover
- A year, on every job
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
When to call us in Albury
Gaps also open up as buildings move: cracked or debonded sealant leaves an open route through the wall. Damage from cleaning, knocks and maintenance adds to it.
If you can see any of these, it’s time to have the joints looked at:
- Open joints along the top of partitions
- Joints picked up in a fire-stopping survey
- Gaps filled with a product that is not fire-rated
- Cracked or shrunken fire-rated sealant
If you look after a church, hall or community building such as Church of St Peter and St Paul, gaps around pipes and cables are worth checking after any building work there.
Questions to ask before you book
- Is the old sealant removed completely?
- Who turns up on the day
- Whether they’re fully insured
- What guarantee comes with the work
Different surfaces, different methods
Plasterboard walls
In plasterboard walls, the condition of the board edge matters. Crumbling edges are cleaned back before the sealant goes in.
Flats and HMOs
Working in occupied flats needs some planning. Access to flats and common areas is agreed in advance to keep disruption down.
What we do, step by step
All our tools and materials come with us in the van. After a quick look at the joints together, we protect the area and start. It normally takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere as small as Albury, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Unsuitable material such as ordinary foam or silicone is cut out and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used.
Before we arrive
- Tell us if parking is tricky
- Tell us about any water getting in
- For business premises, tell us about site rules or sign-in
Ask for a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll take it from there.
Advice
Fire rated sealant in Albury: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
Letting a property close to Chilworth station? Then any gap left by new services in shared walls should be closed with a fire-rated product.
Albury is about 4 miles south-east of Guildford, in Surrey. Wherever you are in the GU5 postcode area, we can carry out fire rated sealant at your property. Across Surrey, we cover 395 places, Albury among them. Crawley is on our list too, around 15 miles away.
Here we cover the GU5 postcode area for fire rated sealant. Streets in the area include Weston Fields, Church Lane and Albury Street, and we cover them all. Nearby, we also carry out fire rated sealant in Albury Heath (1 mile south-east), Little London (1 mile south-east), Shere (1 mile east), Gomshall (2 miles east) and East Clandon (2 miles north). Larger places within reach include Guildford (4 miles north-west), Woking (7 miles north-west), Camberley (13 miles north-west), Epsom (13 miles north-east), Horley (14 miles east) and Redhill (14 miles east).
What’s near Albury
Typical jobs here are in homes near The Drummond Arms and the streets around them. The closest station to Albury is Chilworth station, about 1.3 miles west of the centre. Nearby you will also find Shere Museum (1.5 miles east) and Guildford Castle (3.4 miles west). Not far away are Combe Bottom and Silent Pool.
When something else is needed
It helps to know what we cannot do too:
- Issuing a fire rating or certificate for a building
- Fire risk assessments, which need a qualified assessor
- A wall that is not a fire-resisting element to begin with
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Joints and surfaces we work on
- Plasterboard & masonry
- Flats & HMOs
- Pipe & cable gaps
- Service penetrations
- Door frames
- Linear gaps
Landlord and commercial work in Albury
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Albury questions
Is Albury in your area for fire rated sealant?
Yes. We work across London and the South East, and Albury is part of that. Just call 0345 464 0079 or drop us an email with a few details of the job, and we will send you a clear quote.
Do you cover smaller places like Albury?
Yes. Albury is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is it messy?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done.
Do you guarantee your work?
Yes, for a year. If there’s a problem with our work in that time, tell us and we’ll put it right.
How do I get a quote for fire rated sealant in Albury?
It depends on the job, so we quote each one individually. For a quick quote, phone 0345 464 0079 or email us with a short description of the job.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator and we’re fully insured too.
Can you match the sealant colour?
Yes. Sealants come in white, clear, grey and other colours for many products, and we agree the colour with you before work begins.
Why act early in Albury
For some gaps, sealant is not the right answer and another system is needed. Large holes, cable bundles and plastic pipes can call for batts, collars or wraps. We’ll say so if a gap needs something other than sealant. Older cottages and farmhouses around Albury can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
We don’t show prices on the website, because the cost depends so much on the job itself. For a quick quote, please phone 0345 464 0079 or send us an email.
What you get with us
- 4.9 on Google from 180+ five-star reviews
- Domestic, commercial and hotel work
- Tidy, careful work
- A 12-month guarantee on all work
Take a look at what affects the cost or our reviews.
Nearby places to Albury
More services for Albury
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.