Greater London · England
Fire-rated sealant in Agar Town, Greater London
Fire rated sealant in Agar Town from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Ordinary sealant used where a fire-rated product was needed
- Open joints along the top of partitions
- Joints picked up in a fire-stopping survey
What we do, step by step
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes a few hours for a handful of gaps, and longer for a whole building. Parking in much of London is by permit or pay-and-display, so it helps to know what’s near you in Agar Town. It helps if you can point us to a visitor permit or a bay close to the door.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Getting ready for the visit
- Mention if the joints have been sealed before
- Mention any sign-in or site rules at work premises
- Clear items away from the joints we are working on
Getting a quote
Want a quote for fire rated sealant? Please call 0345 464 0079 or drop us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Advice
Fire rated sealant in Agar Town, done properly
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. A new cable run or a replaced pipe can leave an open hole behind. We seal them with a product tested for that kind of gap. If you have damaged fire sealant left by other trades and ordinary sealant used where a fire-rated product was needed, we can put it right.
London’s offices, shops, hotels, student accommodation and blocks of flats all have joints to look after, whether that is washroom resealing or fire-rated sealant around service openings. Out-of-hours working can be arranged where a building in Agar Town cannot close.
A 12-month guarantee comes as standard, so you are not left on your own once the job is done.
- Where
- Agar Town (NW1W, NW1, N1)
- Wider area
- Greater London
- Cover
- 12 months on all our work
- Price
- A clear price before work begins
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlord and commercial work in Agar Town
We work for landlords and agents as well as homeowners. Resealing between tenancies keeps a property looking cared for.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll quote.
Fire rated sealant around Agar Town
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details. Commercial buildings in London often have strict access rules and limited loading, so out-of-hours working can be arranged where needed.
For landlords with property near Camden Road station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant. For buildings such as All Saints, service openings in its walls need the right fire-rated sealant, as in any building.
Agar Town is about 1 mile north-west of St Pancras, in Greater London. Whether you are in the middle of Agar Town or further out, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. 764 places in Greater London are on our list, large and small.
Our applicators cover all of the NW1W, NW1 and N1 postcode area for fire rated sealant and the streets around it. Fire rated sealant is available to properties on Water Lane, Maiden Lane and Camden Road and the roads around them. Being close to the A400 and A5200, Agar Town is simple for us to get to for fire rated sealant. Nearby, we also carry out fire rated sealant in Camden Town (1 mile west), Somers Town (1 mile south), Kings Cross (1 mile south-east), Kentish Town (1 mile north-west) and Barnsbury (1 mile north-east). Larger places within reach include London (3 miles south-east), Kensington (4 miles south-west), Walthamstow (6 miles north-east), Whitechapel (3 miles south-east), Ruislip (12 miles west) and Brompton (3 miles south-west).
Near you in Agar Town
We work in homes and buildings around Vaughan Williams Memorial Library, Golden Lion pub and North Bridge House School, among other places. Other local landmarks include Regent High School (less than half a mile south) and Lewis Cubitt Park (less than half a mile east). There’s a railway station in Agar Town itself: Camden Road station. Well-known places in the area include St Pancras Hospital (within half a mile south) and Montfichet's Tower (2.2 miles south-east). Not far away are Barnsbury Wood and St. James's Park Lake.
What happens if it’s left?
Fire-rated sealants need more care than everyday sealant. Depth, backing and surface preparation all affect how a seal performs, and we work to the product details every time. In a flat in Agar Town, failed sealant seldom stays inside your own four walls: water can reach the neighbours below, and gaps in fire-rated joints affect the whole building.
What you pay reflects the work, not guesswork. That is why we ask about the job first.
Why book with us
- ARBOMaster approved applicator
- Old sealant always removed completely
- We leave the area clean and tidy
- Sanitary silicone with an anti-fungal additive in wet areas
Take a look at what affects the cost or customer reviews.
Nearby places to Agar Town
What else we do in Agar Town
Your questions about fire rated sealant in Agar Town
Can parking be tricky for a visit in Agar Town?
It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. That way the visit can be planned around it.
I let a flat near Camden Road station. Can you help?
Yes. We work for landlords and letting agents as well as homeowners. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Can you do several jobs on one visit?
Yes, and it often makes sense. Doing several areas at once is usually more efficient, so mention them when you ask for a quote.
Is it worth trying it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Where do you work from?
We work from Crawley. We cover Agar Town and the rest of Greater London, along with the rest of our area.
Can you seal over the old sealant?
No. New silicone will not bond to old silicone, and anything trapped underneath, including mould and water, stays there. It all has to come out first.
Can you tell me how many minutes the seal will last?
We do not issue ratings or certificates ourselves. The performance comes from the product’s tested details and the specification from your assessor or designer.
What affects the cost of fire rated sealant
Call for a quick quote. The main things that affect it are:
- How much there is to do
- The type of sealant required
- Mould in or behind the old joints
- How many areas need sealing
Combining jobs into one visit usually makes better use of the time than several visits. We will send you a clear quote for the lot.
Helping us quote
To help us quote quickly, let us know:
- Whether it’s a home or a business
- Whether it has been sealed before
- Any access issues, like height or stairs
- Photos by email, if that’s easy
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we will talk you through the work and give you a clear price.
What the job involves on each surface
Flats and HMOs
Conversions usually leave a mix of old and new service holes. The gaps on your list are sealed with a fire-rated product and the locations noted.
Door frames
Frame gaps are normally hidden behind the architrave. Where it’s open, we seal it to the product’s details for that gap size before the trim goes back.
When to call us in Agar Town
Movement in the structure can open gaps too: a seal that cracks or pulls away leaves a path for smoke. Damage from cleaning, knocks and maintenance adds to it.
Most people get in touch after spotting something like this:
- Damaged fire sealant left by other trades
- Gaps flagged on a fire risk assessment
- Open gaps behind door architraves
- Gaps left after a refit or conversion
Managing a site like Abacus Belsize Primary School? Then gaps opened by contractors for new cabling are a common finding in schools and offices.
Comparing quotes
- What product goes in the joint
- What guarantee comes with the work
- How the joint is cleaned and prepared
- When the joint can take water or movement
Can I do it myself?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.