Aberdeenshire · Scotland
External & façade joints in Ruthven, Aberdeenshire
Sealing brickwork movement joints, render, cladding and façade joints for Ruthven, backed by a 12-month guarantee. Ask us for a quote.
- Cracked joints where brick meets render or frames
- Water getting into walls through failed joints
- Sealant pulling away from one side of the joint
External mastic for homes and businesses in Ruthven
As ARBOMaster approved applicators, we choose exterior sealants to suit the joint and the surfaces. Some surfaces need a primer before sealing. We work on façade panels, brickwork movement joints and copings & trims, and common reasons people get in touch are joints with sealant missing in places and failed seals between different materials.
Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Outside joints on exposed walls work hard, so they need a sealant that moves with the building.
Big or small, it’s backed by our 12-month guarantee.
- Place
- Ruthven (AB54)
- Wider area
- Aberdeenshire
- Guarantee
- A year, on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
The process
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours to a few days, depending on the length of joint and the access. Somewhere like Ruthven may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- Each joint is checked and the colour of the new sealant agreed.
- Failed sealant is removed back to clean, sound faces.
- Backing rod goes in so the sealant can stretch between the two faces.
- Primer is applied wherever the sealant needs it.
- A low-modulus exterior sealant is gunned in and tooled to a neat finish.
Getting ready for the visit
- For indoor joints, keep the area dry beforehand if you can
- Keep children and pets away from the work area
- Mention any sign-in or site rules at work premises
Ask for a quote
Every job is quoted individually. Simply email us at info@mrmastic.co.uk and describe the job and send pictures if you have them.
Read more
What else we do in Ruthven
Why act early in Ruthven
Sealing over the top of old mastic doesn’t hold for long. The new layer cannot bond properly to old, weathered material, so we always take the old sealant out. In a place like Ruthven, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
What it costs depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before any work starts.
Why choose Mr Mastic in Ruthven
- 12-month guarantee on every job
- 20+ years of sealant experience
- Anti-fungal silicone where joints get wet
- Domestic, commercial and hotel work
Read our cost guide or customer reviews.
Common problems we fix in Ruthven
Every building moves. Brickwork grows a little over the years, blockwork and concrete shrink, and all of it moves with heat and moisture. The sealant in the movement joints takes that strain.
Look out for any of the following:
- Hard, crazed mastic that has stopped moving
- Plants rooting in failed movement joints
- Gaps where render, brick and frames meet
- Movement joints filled with mortar instead of sealant
If you live in an older home near Old Parish Church and Burial-Ground, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Before you book anyone
- How the joint is cleaned and prepared
- How long to leave it before use
- Whether VAT is included
- What happens if they find a problem under the old sealant
External mastic in Ruthven: local notes
Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that.
Rented homes near Huntly station change hands often, and split movement joints are easy to miss on a rental until damp shows inside.
Ruthven is about 13 miles south-east of Buckie, in Aberdeenshire. We provide external mastic to homeowners, landlords and businesses in Ruthven, as part of our work across Aberdeenshire. Ruthven is one of 161 towns and villages in Aberdeenshire we cover for external mastic. You can also see our page for Aberdeen, roughly 36 miles from Ruthven.
We work across the AB54 postcode area for external mastic. We also cover the places around Ruthven: Cairnie (2 miles south-west), Milltown of Rothiemay (3 miles east), Huntly (5 miles south), Keith (5 miles north-west) and Newmill (6 miles north-west). Further out, we also cover Turriff (14 miles east), Banff (15 miles north-east), Portsoy (13 miles north), Insch (14 miles south-east), Aberchirder (8 miles north-east) and Whitehills (15 miles north-east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
What’s near Ruthven
The nearest railway station is Huntly station, roughly 4.8 miles south of the centre. A little further out are Jubilee Hospital (4.8 miles south) and Daugh Castle (0.5 miles north). The countryside around Ruthven includes The Bin.
How to look after the new joints
Good habits help new joints last longer. A few tips:
- Check external joints each spring
- Fix overflowing gutters above sealed joints
- Keep movement joints as flexible joints, not mortar
- Have failed joints looked at early
Make sure anyone working on the wall later knows where the movement joints are. They must stay as flexible joints, never rendered or pointed over.
An open movement joint lets rain into the wall every time it pours. That can lead to damp patches, staining and frost damage.
DIY versus a professional finish
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Different surfaces, different methods
Cladding and façade panels
Where a cladding system has its own specified sealant, we follow it or an approved alternative. Send us any details you have about the façade.
Brickwork movement joints
Clay brickwork grows slightly over its life and moves with the weather. The movement joint takes that up, so the sealant in it must stay soft and stretchy.
What affects the quote in Ruthven
Call for a quick quote. What matters most is:
- The number of rooms or windows
- Any mould that needs treating
- Any working-time requirements on site
- The type of sealant required
Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
What we need to know
When you call or email, these details help:
- Where the property is
- Whether it’s a home or a business
- Photos by email, if that is easy
- The rough size of the job
We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To get started, email us at info@mrmastic.co.uk.
Your questions about external mastic in Ruthven
Is Ruthven within the area you cover?
Yes, Ruthven is covered. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you do external mastic in Ruthven?
Yes. Our work covers the whole of Scotland, and Ruthven is part of that. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing.
How do you reach high-level joints?
It depends on the building. Where joints can be reached safely, we’ll do them. Tell us about the building and we’ll confirm what access is needed.
How long will you be here?
That depends on how much there is to do, but as a guide it takes a few hours for a handful of joints, longer for a whole elevation. We will tell you when we quote.
Is it messy?
No. The area is protected while we work and cleaned up afterwards.
Why is there a gap in my brick wall?
A vertical gap in a long brick wall is generally a movement joint. It lets the bricks expand without cracking and needs a flexible seal, not mortar.
Do you work for landlords and businesses?
Yes, we do. We work in homes, commercial premises and hotels.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often happy for the work to be arranged.