East Ayrshire · Scotland
External & façade joints in Riccarton, East Ayrshire
Problem with your movement joints in Riccarton? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Damp patches traced to an open external joint
- Old sealant gone brittle and cracked
- Joints pointed up with cement by mistake
External mastic in Riccarton
Joints between dissimilar materials, like brick against render or concrete against a steel frame, see movement from both sides. A flexible sealant bridges the two. We are often asked to deal with damp patches traced to an open external joint and cracked joints where brick meets render or frames, on brickwork movement joints, joints between brick and frames and render & cladding joints.
Outside joints can only be sealed when they’re dry, so work in Riccarton depends on the weather, and longer journeys are planned in advance. Tell us how to reach each wall, gutter and roofline.
You get a 12-month guarantee, the same in Riccarton as everywhere else we work.
- Where
- Riccarton (KA1)
- Wider area
- East Ayrshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Aftercare tips
After the cure time, these simple habits help:
- Leave the joints unpainted unless we’ve said otherwise
- Avoid pressure-washing directly into sealant joints
- Keep soil, plants and ivy away from the joints
- Fix overflowing gutters above sealed joints
Give the sealant the cure time we tell you before anything rubs against it. The surface skins over quickly, but full cure takes longer.
Small splits are the time to act. At that stage it’s a simple cut out and reseal with no damage behind it to deal with.
Honest limits
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Render that’s blown, hollow or coming away
- Adding movement joints to masonry that has none
- Cracked brickwork or render that needs a builder or plasterer
If in doubt, email us at info@mrmastic.co.uk and we’ll say what we think before booking.
Where we work in Riccarton
- Concrete & block
- Façade panels
- Joints between brick and frames
- Brickwork movement joints
- Render & cladding joints
- Copings & trims
Landlord and commercial work in Riccarton
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can be quoted together.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Different surfaces, different methods
Cladding and façade panels
Where a cladding system has its own specified sealant, we follow it or an approved alternative. Tell us what the building has when you get in touch.
Render joints
Render has movement joints and stop beads that need sealing. They’re resealed in a sealant that suits the render.
Common questions in Riccarton
Do you cover smaller places like Riccarton?
Yes, Riccarton is covered. We work across all of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Kilmarnock station?
Yes, rental work is part of what we do. Just email us at info@mrmastic.co.uk and tell us about the property, and we’ll give you a clear price.
How long will you be here?
As a guide, most jobs take a few hours for a handful of joints, longer for a whole elevation. Bigger jobs take longer, and we’ll tell you how long to expect.
Do you seal joints where cladding meets other materials?
Yes. The old joint is removed, both surfaces cleaned and primed where needed, and a flexible sealant applied. The colour is chosen to suit.
How often do external joints need resealing?
There’s no fixed answer: joints on exposed walls or with a lot of movement age sooner. Check them each year and reseal when they split or harden. Every job carries our 12-month guarantee.
Is it OK to seal over old sealant?
No, it won’t last. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.
Are you ARBOMaster approved?
Yes. We are approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Why it’s worth doing now in Riccarton
Pointing a movement joint with mortar might seem a neat fix, but it locks the joint solid. The wall then cracks somewhere else. The correct repair is a flexible sealant with the right backing. In an older home around Riccarton, damp from a failed joint can get into timber and plaster.
Doing several joints on one visit is generally more efficient than separate visits, so tell us about everything that needs sealing. We will send you a clear quote for the lot.
What you get with us
- A choice of colours where the product allows
- 12-month guarantee on every job
- We are fully insured
- Over 20 years’ experience
See how sealant jobs are priced and our reviews.
Riccarton buildings and the weather
With historic houses such as Carnell Estate (about 2.7 miles south-east) nearby, there’s older building stock in the area around Riccarton as well as newer homes. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth. Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.
Carnell Estate, about 2.7 miles south-east, is one of the historic houses in the wider area around Riccarton, and older homes nearby need a sealant that suits their walls. For landlords with property near Kilmarnock station, split movement joints are easy to miss on a rental until damp shows inside. For site and facilities teams at buildings such as Kilmarnock Academy, its movement joints, gutters and trims need looking after like any other building’s.
Riccarton is about 2 miles south of Kilmarnock, in East Ayrshire. If you need external mastic in Riccarton, please send an email to info@mrmastic.co.uk for a quick quote. We cover East Ayrshire from our Crawley base. Riccarton is one of 53 places in East Ayrshire where we work. Glasgow is on our list too, around 20 miles away.
Here we cover the KA1 postcode area for external mastic. External mastic is available to properties on Campsie Road, Merrick Road and Cromdale Road and the roads around them. Close by, we work in Hurlford (2 miles north-east), Craigie (2 miles south), Crookedholm (2 miles north-east), Kilmarnock (2 miles north) and Annanhill (2 miles north-west). Larger places within reach include Stewarton (7 miles north), Cumnock (13 miles south-east), Galston (4 miles east), Mauchline (6 miles south-east), Darvel (8 miles east) and Newmilns (6 miles east).
Around Riccarton
The closest station to Riccarton is Kilmarnock station, about 2.1 miles north of the centre. Nearby you’ll also find Kirklandside Hospital (0.9 miles north-east) and The Dick Institute (1.8 miles north). For a walk, there’s Caprington Loch.
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
The process
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the job takes a few hours to a few days, depending on the length of joint and the access in most cases. For a place like Riccarton, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We look at every joint and agree a colour to suit the wall.
- We take out the old sealant until the faces are sound.
- Closed-cell backing rod is pushed in so the sealant bonds to two sides only.
- Primer is applied wherever the sealant needs it.
- We gun in low-modulus sealant and tool it neatly.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any sign-in or site rules at work premises
- Mention any parking rules near the property
How to get a quote
For a quote, email us at info@mrmastic.co.uk with the location and a short description of the problem. You’ll have a clear quote before we start.