Medway · England
External & façade joints in Meresborough, Medway
Sealing brickwork movement joints, render, cladding and façade joints for homeowners, landlords and businesses in Meresborough. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Old sealant gone brittle and cracked
- Water getting into walls through failed joints
- Moss and dirt in joints with no sealant left
How we handle external mastic in Meresborough
Low-level joints can normally be done from the ground. Where joints are higher up, tell us about the building when you get in touch and we’ll confirm what access is needed. Typical jobs include joints where the bead has come unstuck and joints pointed up with cement by mistake, across concrete & block, façade panels and render & cladding joints.
External sealant needs dry, clean surfaces, so work around Meresborough is planned for dry weather. Let us know about access to every wall, plus any garages or outbuildings.
All our work comes with a 12-month guarantee, wherever you are in Medway.
- Place
- Meresborough (ME8)
- Region
- Medway
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Surface by surface
Cladding and façade panels
Cladding and façade panels are usually separated by sealed joints. Each joint gets a sealant that suits the panel and its movement.
Concrete and blockwork
Big joints in concrete need careful depth control. Backing rod sized to the joint sets it.
External mastic in Meresborough: local notes
Meresborough is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on movement joints and outside wall joints, especially on the side facing the sea. London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
For an older house near a landmark such as St Paul's Church, old and new materials meet at the roofline and walls, which is where sealant earns its keep. For landlords with property near Rainham (Kent) station, failed wall and movement joints let damp in, so they’re worth checking between tenancies.
Meresborough is about 2 miles south-east of Gillingham, in Medway. Across the ME8 area, we cover external mastic for homes and businesses. Our Medway coverage runs to 68 places, and Meresborough is one of them. Chelmsford is on our list too, around 27 miles away.
Postcode districts we cover here for external mastic: ME8. If you’re just outside Meresborough, we cover Rainham (1 mile north), Moor Street (1 mile north-east), Hartlip (1 mile east), Yelsted (1 mile south) and Lower Hartlip (1 mile east). Further out, we also cover Chatham (4 miles west), Rochester (6 miles north-west), Strood (7 miles north-west), Luton (4 miles north-west), Lordswood (3 miles west) and Hoo St Werburgh (6 miles north-west).
What’s near Meresborough
We work in homes and buildings around Howard School, Foxburrow Wood and Leigh Academy Rainham, among other places. The nearest railway station is Rainham (Kent) station, roughly 1.3 miles north. Other landmarks nearby include Medway Maritime Hospital (3.7 miles north-west). Green spaces nearby include Detling Hill and Bishop Saltings.
What sealant work cannot fix
To be straight with you, there are a few things sealant won’t fix:
- Rising or penetrating damp from elsewhere in the wall
- Cracks in the bricks or render themselves, away from the joints
- Movement that is more than a sealant joint can take
If you are not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer before you book.
Where we work in Meresborough
- Render & cladding joints
- Concrete & block
- Copings & trims
- Façade panels
- Joints between brick and frames
- Brickwork movement joints
Do you need external mastic in Meresborough?
If plants are growing out of a joint, the sealant has generally failed or was never there. Dirt and roots then trap moisture in the joint.
These are the problems we are asked about most:
- Hard, crazed mastic that has stopped moving
- Brick movement joints where the sealant has split
- Moss and dirt in joints with no sealant left
- Movement joints filled with mortar instead of sealant
Managing a site like Park Wood Infant School? Then its movement joints, gutters and trims need looking after like any other building’s.
Before you book anyone
- Which colour the sealant will be
- How the surfaces are prepared before sealing
- What happens if the job turns out different
- Are they insured?
Places near Meresborough
What else we do in Meresborough
Common questions in Meresborough
Can you help a landlord with a rental near Rainham (Kent) station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Is Meresborough within the area you cover?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you have insurance?
Yes. We are fully insured.
Why do you put foam in the joint first?
Backing rod goes into deeper joints as a matter of course. It sets the sealant depth and prevents three-sided bonding.
Do I have to be there?
That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Will the old sealant be removed?
Yes. We cut out all the old sealant and clean the joint before applying anything new.
Can you reach joints on upper floors?
That depends on the building and the joints. Where joints can be reached safely, we’ll do them. Give us some details and we’ll confirm the access.
Do you work for hotels and businesses?
Yes. Commercial and hotel work is a large part of what we do. Working times can be discussed when we quote.
What affects the quote in Meresborough
Jobs vary more than people expect. What affects the quote:
- Mould in or behind the old joints
- The size of the job
- Which sealant suits the joint
- How many areas need sealing
What you pay reflects the work, not a rough estimate. That is why we ask about the job first and send you a clear quote before we start.
What to tell us for a quote
To help us quote quickly, let us know:
- Any access issues, like height or stairs
- Whether it’s a home or a business
- Roughly how big the job is
- What’s wrong with the joints now
We quote each job on its own, so the first step is telling us about yours. Just call 0345 464 0079 or drop us an email with the details, and pictures are welcome.
How it works
Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes anything from a few hours to several days, depending on the building. For a village or hamlet like Meresborough, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We inspect the joints and agree which need resealing and how they’ll be reached.
- Old sealant and any debris are cut and raked out.
- The joint faces are cleaned and primed where the sealant needs it.
- Backing rod goes in next, setting the depth and keeping the sealant off the back of the joint.
- The new sealant, chosen to suit the brick or render, is applied and tooled to a neat finish.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- Clear the area around the work
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
Need a quote? Please phone 0345 464 0079 or email us and tell us about the job. We will explain what we’d do and send you a clear quote before work begins.
Advice
Landlords, agents and businesses in Meresborough
If you manage several properties in or around Meresborough, jobs at different addresses can be quoted together. Send us the addresses and the work at each.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.