Aberdeen · Scotland
External & façade joints in Hatton of Fintray, Aberdeen
External mastic for Hatton of Fintray and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Failed sealant between panels on a façade
- Hard, crazed mastic that has stopped moving
- Rigid filler in a joint that should flex
External mastic in Hatton of Fintray, done properly
Getting the depth right is half the job. Closed-cell backing rod sets the depth and stops the sealant sticking to the back, so it bonds to the two sides only and can stretch. We are often asked to deal with sealant that has lost its bond to the brick or render and failed seals between different materials, across concrete & block, façade panels and joints between brick and frames.
Stone walls need a stone-friendly sealant, as acetoxy products can attack some stone. On newer homes, the movement joints and roofline trims are what need watching.
All our work comes with our 12-month guarantee.
- Place
- Hatton of Fintray (AB21)
- Region
- Aberdeen
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Questions from Hatton of Fintray
I let a flat near Kintore station. Can you help?
Yes, we work for landlords and letting agents. You can send an email to info@mrmastic.co.uk with the address and a few details, and we’ll give you a fixed price before we start.
Do you cover smaller places like Hatton of Fintray?
Yes. Hatton of Fintray is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Can a movement joint be filled with mortar?
No. Rigid materials can’t move with the wall and the joint fails. If it has already been filled, we can normally cut it out and reseal it.
Is there any odour?
Sometimes, a little. Any smell clears as the sealant cures.
How long should I leave it?
Different products cure at different speeds, so follow the cure time we give you when we finish.
How much does external mastic cost in Hatton of Fintray?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we’ll talk you through it.
How do you reach high-level joints?
It depends on the building. Tell us the height, the number of joints and what’s below them and we’ll confirm how they can be reached safely.
Is there a guarantee?
Yes. There’s a 12-month guarantee on every job, wherever you are.
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What else we do in Hatton of Fintray
How we quote for external mastic
The quote reflects the job in front of us. We take into account:
- The old material and how stubborn it is
- How much there is to do
- The product the joint needs
- Working hours on commercial sites
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we will talk you through it.
What we need to know
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- Pictures of the joints, sent by email
- Access, such as stairs, a lift or height
- The type of property
- The problem you’ve noticed
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will talk you through the work before giving you a price.
Why act early in Hatton of Fintray
A properly done movement joint is an even line in a colour that suits the wall. A hurried job with smeared edges and no backing looks worse and fails sooner so it’s worth doing right. In an older home around Hatton of Fintray, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
What you pay reflects the work, not guesswork. That is why we ask about the job first and agree the price before starting.
Why book with us
- 180+ five-star Google reviews
- We agree the colour with you first
- Full insurance on every job
- More than 20 years in sealant work
See what affects the cost or our reviews.
Landlord and commercial work in Hatton of Fintray
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Outside joints around Hatton of Fintray
Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface. Aberdeen’s nickname, the Granite City, comes from its stone buildings, and sealing against granite needs clean, sound edges and a sealant that suits stone.
In the older streets around Old Parish Church, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Hatton of Fintray is about 6 miles south-east of Inverurie, in Aberdeen. If you need external mastic in Hatton of Fintray, it’s easy to get a quote: please email us at info@mrmastic.co.uk. We cover Aberdeen from our Crawley base. Our Aberdeen coverage runs to 63 places, Hatton of Fintray among them. Aberdeen is on our list too, around 8 miles away.
Our applicators cover all of the AB21 postcode area for external mastic and the streets around it. If you need external mastic at a property on Station Road, Hatton Court and Lairds Park or anywhere close by, we can help. Neighbouring places we cover for external mastic include Mill of Fintray (1 mile west), Blackburn (2 miles south), Kinmuck (3 miles north-west), Kinellar (3 miles south-west) and Kinmundy (3 miles east). We also work in nearby towns such as Aberdeen (8 miles south-east), Rosemount (8 miles south-east), Berryden (8 miles south-east), Ferryhill (9 miles south-east), New Aberdeen (9 miles south-east) and Dyce (4 miles south-east).
Around Hatton of Fintray
For rail, the closest station is Kintore station, about 3.2 miles west. Well-known places in the area include Kingseat Hospital (4.4 miles north-east) and Hallforest Castle (3.9 miles west). Not far away are Temple Hill.
Do you need external mastic in Hatton of Fintray?
Many joints fail because they were sealed too deep or with nothing behind them. Sealant bonded to three sides has nowhere to go and tears as soon as the joint widens.
It’s worth asking for a quote if you see:
- Gaps where render, brick and frames meet
- Weeds or debris growing in open joints
- Old sealant gone brittle and cracked
- Movement joints with cracked, split or missing sealant
Letting a property close to Kintore station? Then split movement joints are easy to miss on a rental until damp shows inside.
Before you book anyone
- Whether VAT is included
- What product goes in the joint
- Which colour the sealant will be
- What guarantee comes with the work
The process
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take a few hours for a handful of joints, longer for a whole elevation. Outdoor work around Hatton of Fintray depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- We inspect the joints and agree which need resealing and how they’ll be reached.
- The old mastic and anything lodged in the joint is removed.
- The joint faces are cleaned and primed where the sealant needs it.
- We push in closed-cell backing rod so the sealant is the right depth and bonds to the sides only.
- A flexible exterior sealant is applied and tooled in a colour to suit the wall.
How to prepare
- Mention if the joints have been sealed before
- Keep children and pets away from the work area
- For business premises, tell us about site rules or sign-in
How to get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will talk you through what we’d do. Whenever you are ready, email us at info@mrmastic.co.uk.
Read more
What we cannot put right
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- Subsidence or other structural problems
- Failed render or damaged cladding panels
- Damp from another source, such as a leaking gutter or a bridged damp-proof course
Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly before you book.
Surfaces we seal
- Joints between brick and frames
- Brickwork movement joints
- Render & cladding joints
- Façade panels
- Copings & trims
- Concrete & block