Kent · England
Brenzett External Mastic
Sealing brickwork movement joints, render, cladding and façade joints in Brenzett, with a 12-month guarantee on every job. Ask us for a quote.
- Movement joints with cracked, split or missing sealant
- Panel joints letting water in
- Weeds or debris growing in open joints
External mastic for homes and businesses in Brenzett
We are ARBOMaster approved applicators, and each external joint gets a sealant suited to it. Some surfaces need a primer before sealing and we use one wherever it does. We work on concrete & block, façade panels and joints between brick and frames, and the jobs we see most are sealant pulling away from one side of the joint and old sealant gone brittle and cracked.
External sealant needs dry, clean surfaces, so work around Brenzett is planned for dry weather. Tell us about access to all sides of the building, including outbuildings and garages.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Where
- Brenzett (TN29)
- Wider area
- Kent
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Keeping the joints in good condition
Looking after new joints is easy:
- Walk round the building once a year and look at the joints
- Fix overflowing gutters above sealed joints
- Make sure movement joints aren’t pointed over
- Wash walls gently around the sealant
Keep pressure washers away from the sealant. A strong jet can damage the edges of the bead.
Once a joint cannot move, the wall finds another way, often as cracks near the joint. Resealing it early helps prevent that.
Brenzett questions
Is Brenzett within the area you cover?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Appledore (Kent) station?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before any work starts.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned before applying anything new.
Do I need to be at home?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Do you seal joints where cladding meets other materials?
Yes. Materials like render, brick, metal and uPVC all move differently, so the joint between them must be flexible. We choose one that suits both surfaces.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Do you work at height?
That depends on the building and the joints. Where joints can be reached safely, we’ll do them. Tell us about the building and we will confirm what access is needed.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us and we are fully insured.
How we quote for external mastic
The price is agreed before any work begins. It takes into account:
- The number of rooms or windows
- Which sealant suits the joint
- Whether the work is at height
- The number and length of the joints
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Asking for a quote
Before you ask for a quote, have a think about:
- How many joints, rooms or windows are involved
- Where the property is
- What’s wrong with the joints now
- Pictures of the joints, sent by email
For external mastic in Brenzett, call 0345 464 0079 or email us. Tell us what the problem is and where, and we will agree the price before any work begins.
What else we do in Brenzett
Leave it or put it right?
Low-modulus sealants stretch easily, so they put less strain on the joint edges. That protects surfaces like brick, render and concrete. Too stiff a sealant can pull at the edges and break them. Where a wall is exposed, as many are in small places like Brenzett, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part.
Why Brenzett clients choose us
- Fully insured
- Neat joints and a tidy finish
- 20+ years of sealant experience
- 12-month guarantee on every job
Take a look at what affects the cost or our reviews.
Outside joints around Brenzett
Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Managing a site like Brenzett Church of England Primary School? Then larger buildings have long runs of movement joint that eventually need resealing. In the older streets around St Eanswith's Church, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Brenzett is about 9 miles south of Ashford, in Kent. From the centre of Brenzett to the outskirts, we cover external mastic for every kind of property. Our Kent coverage runs to 922 places, and Brenzett is one of them. For nearby work, see our Brighton page (44 miles or so).
Jobs for external mastic in TN29 works the same way as everywhere else we cover. Whether your property is on Moore Close, King Street and Church Lane or anywhere close by, we can help. We also cover the places around Brenzett: Snargate (1 mile north-west), Ivychurch (2 miles east), Kenardington (4 miles north-west), Hamstreet (4 miles north) and Ruckinge (4 miles north-east). Larger places within reach include Ashford (9 miles north), Folkestone (15 miles east), Hythe (11 miles north-east), Hawkinge (15 miles north-east), Tenterden (8 miles north-west) and Cheriton (14 miles north-east).
Near you in Brenzett
Typical jobs here are in homes near The Fleur De Lys Public House The Fleur-De-Lys-Public House, among other places. For rail, the closest station is Appledore (Kent) station, about 2.3 miles north-west of the centre. Other landmarks nearby include Brenzett Aeronautical Museum (under half a mile east) and Romney 'castle' (2.2 miles south-east). Open spaces near Brenzett include Orlestone Forest and Burnthouse Pen.
Different surfaces, different methods
Render joints
The face of render can be soft, so a low-modulus sealant is kinder to the joint edges. We prime where the product needs it.
Cladding and façade panels
Metal and composite panels move a lot with temperature, so the joints work hard every day. We choose the product to suit.
Can I do it myself?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
How the visit works
You don’t need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the job takes anything from a few hours to several days, depending on the building for a typical job. Somewhere as small as Brenzett, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, the joints are inspected and the access agreed.
- Every bit of old sealant and any mortar or debris is cut out.
- The faces are brushed clean and primed where the product requires it.
- We fit closed-cell backing rod to control the depth.
- The exterior sealant is applied, tooled and checked along its length.
Preparing for the visit
- For business premises, tell us about site rules or sign-in
- Where the joints are inside, avoid wetting them before we arrive
- Mention if the joints have been sealed before
Get a quote
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we will come back to you with a quote.
Related advice
What we’re called out for in Brenzett
Many joints fail because they were sealed too deep or with nothing behind them. Sealant bonded to three sides has nowhere to go and tears as soon as the joint widens.
These are the problems we’re asked about most:
- Cracked joints where brick meets render or frames
- Movement joints with cracked, split or missing sealant
- Moss and dirt in joints with no sealant left
- Damp patches traced to an open external joint
Rented homes near Appledore (Kent) station change hands often, and failed wall and movement joints let damp in, so they’re worth checking between tenancies.
Questions to ask before booking
- What the quote includes, VAT included or not
- How hidden problems are handled
- What preparation is included
- Whether they seal over old material or remove it