Essex · England
External & façade joints in Bradwell, Essex
Sealing brickwork movement joints, render, cladding and façade joints for homes and businesses in Bradwell and across Essex. Fully insured, ARBOMaster approved and guaranteed for a year.
- Hard, crazed mastic that has stopped moving
- Weeds or debris growing in open joints
- Joints pointed up with cement by mistake
About our external mastic in Bradwell
Many failed façade joints only get noticed once there’s a stain or a damp patch inside. We inspect them, agree which need doing and reseal with a weatherproof, flexible sealant. Common call-outs are for plants rooting in failed movement joints and joints with sealant missing in places, on façade panels, render & cladding joints and brickwork movement joints.
Somewhere as small as Bradwell, homes and farm buildings often face open ground, where walls and rooflines take the weather head on. Joints on those walls need a sealant that moves with the building and stays in place.
The work is covered for a year after we finish. If anything isn’t right with it, call 0345 464 0079 or drop us an email.
- Where
- Bradwell (CM77)
- Wider area
- Essex
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Walls and rooflines in Bradwell
The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Schools such as Alec Hunter Academy are buildings too, and larger buildings have long runs of movement joint that eventually need resealing. If you live in an older home near Parish Church of the Holy Trinity, old and new materials meet at the roofline and walls, which is where sealant earns its keep. If you let a flat or house near Braintree Freeport station, failed wall and movement joints let damp in, so they’re worth checking between tenancies.
Bradwell is about 3 miles east of Braintree, in Essex. Homes, rented property, offices and hotels in Bradwell can book us for external mastic, old or new, large or small. Every job comes with our 12-month guarantee. Our Essex coverage runs to 644 places, and Bradwell is one of them. You can also see our page for Chelmsford, roughly 11 miles from Bradwell.
Postcode districts we cover here for external mastic: CM77. You will find streets such as The Street, Church Road and Rectory Meadow, all of which we cover. We also cover the places around Bradwell: Perry Green (1 mile south), Lanham Green (1 mile south-west), Pattiswick (1 mile north-east), Stisted (1 mile north) and Cressing (1 mile south-west). Further out, we also cover Colchester (12 miles east), Chelmsford (11 miles south-west), Braintree (3 miles west), Maldon (11 miles south), Witham (5 miles south) and Camulodunum (11 miles east).
Around Bradwell
Around Bradwell, our work takes us to homes and buildings near The Dolphin Public House and the streets around them. The closest station to Bradwell is Braintree Freeport station, roughly 2.3 miles west of the centre. Nearby you’ll also find Laundry & Mangle Museum (2.2 miles east) and William Julien Courtauld Hospital (3.3 miles west). Open spaces near Bradwell include Belcher's and Broadfield Woods.
Honest limits
In fairness, some problems need a different trade:
- Structural movement, which needs a surveyor or engineer
- Walls that need new movement joints cut into them
- Damp that is not coming from the joint
Not sure which it is? You can ring 0345 464 0079 or email us and we’ll tell you honestly.
Joints and surfaces we work on
- Façade panels
- Render & cladding joints
- Copings & trims
- Concrete & block
- Brickwork movement joints
- Joints between brick and frames
How we quote for external mastic
Your quote is based on your job. We look at:
- Whether the work is at height
- The number of rooms or windows
- The size of the job
- Which sealant suits the joint
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What we need to know
To help us quote quickly, let us know:
- Roughly how big the job is
- If it’s domestic, commercial or a hotel
- If someone has resealed it before
- What the problem is, such as mould, gaps, leaks or cracking
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, phone 0345 464 0079 or send us an email.
How it works
Good joint work is mostly preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for a handful of joints, longer for a whole elevation. In a small place like Bradwell, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We inspect the joints and agree which need resealing and how they’ll be reached.
- Old sealant and any debris are cut and raked out.
- We clean both faces of the joint and prime them where the product calls for it.
- We push in closed-cell backing rod so the sealant is the right depth and bonds to the sides only.
- We gun in a flexible exterior sealant in a colour that suits the wall and tool it neatly.
Preparing for the visit
- Keep children and pets away from the work area
- Clear items away from the joints we are working on
- Mention if the joints have been sealed before
How to get a quote
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we will explain what’s involved.
Related advice
What the job involves on each surface
Copings and trims
Joints in copings, parapets and trims are exposed to the worst of the weather. Each is resealed with a weatherproof, flexible sealant.
Render joints
Rendered walls have joints at beads, openings and changes of material. They’re resealed in a sealant that suits the render.
Work for landlords, hotels and businesses
We work for landlords and letting agents as well as householders. Sealant work between tenants keeps a property looking cared for before the next move-in.
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Bradwell questions
I let a flat near Braintree Freeport station. Can you help?
Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Is Bradwell within the area you cover?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Why do you put foam in the joint first?
Backing rod goes into deeper joints as a matter of course. It controls the depth and stops the sealant bonding to the back so the bead can stretch.
Is there any odour?
There can be a smell while the sealant cures, but it fades. Ventilation helps.
Is the work guaranteed?
Yes. Every job comes with our 12-month guarantee.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
What sealant do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we are using and why.
How long should I leave it?
Different products cure at different speeds, so please follow the time we give you.
Towns and villages near Bradwell
What else we do in Bradwell
Should I try it myself first?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
How to look after the new joints
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Don’t let climbing plants root in the sealant
- Avoid pressure-washing directly into sealant joints
- Have failed joints looked at early
- Leave the joints unpainted unless we’ve said otherwise
Keep pressure washers away from the sealant. A strong jet can damage the edges of the bead.
Act while the splits are small. At that stage it’s a simple cut out and reseal before water has had years to get in.