Hampshire · England
External & façade joints in Abbotts Ann, Hampshire
We cover Abbotts Ann for sealing brickwork movement joints, render, cladding and façade joints. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Hard, crazed mastic that has stopped moving
- Brick movement joints where the sealant has split
- Weeds or debris growing in open joints
External mastic in Abbotts Ann
Low-level joints can normally be done from the ground. For joints higher up, give us some details of the building and we will confirm what’s needed to reach them safely. We work on render & cladding joints, concrete & block and brickwork movement joints, and common reasons people get in touch are failed seals between different materials and sealant that has lost its bond to the brick or render.
Somewhere as small as Abbotts Ann, homes and farm buildings often face open ground, so walls and rooflines take the full force of wind and rain. Joints on those walls need a sealant that moves with the building and stays in place.
We stand behind the work with a 12-month guarantee, so you are not left on your own once the job is done.
- Where
- Abbotts Ann (SP11)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quote
- A clear price before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Honest limits
It helps to know what we cannot do too:
- Subsidence or other structural problems
- Cracked brickwork or render that needs a builder or plasterer
- Loose or hollow render, which needs re-rendering
If in doubt, call 0345 464 0079 or drop us an email and we will say what we think.
Joints and surfaces we work on
- Concrete & block
- Joints between brick and frames
- Render & cladding joints
- Brickwork movement joints
- Façade panels
- Copings & trims
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. A few tips:
- Clear growth from the base of walls and joints
- Have failed joints looked at early
- Deal with leaking gutters that soak the joints below
- Ask before painting over external sealant
Avoid pressure-washing straight into the joints. A strong jet can damage the edges of the bead over time.
If you can see gaps, plants or bare sections in a joint, have it checked. Earlier resealing means a smaller job and a better result.
Places near Abbotts Ann
Other services in Abbotts Ann
Signs you need external mastic in Abbotts Ann
The wrong product in a moving joint is a classic cause. A stiff, general-purpose sealant cannot cope with a joint that moves a lot, so it pulls away from the edges.
The most common problems we see are:
- Weeds or debris growing in open joints
- Panel joints letting water in
- Damp patches traced to an open external joint
- Joints pointed up with cement by mistake
If you look after a building such as Abbotts Ann Church of England Primary School, its movement joints, gutters and trims need looking after like any other building’s.
Questions to ask before you book
- Are they insured?
- Whether VAT is included
- What the cure time is
- Whether they seal over old material or remove it
Your questions about external mastic in Abbotts Ann
Will you come out to Abbotts Ann?
Yes, Abbotts Ann is covered. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Can you help a landlord with a rental near Andover station?
Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear quote.
Will you leave a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Do you use backing rod?
Backing rod controls the sealant depth and keeps it off the back of the joint. Then the sealant bonds to two faces and can move.
What do you need from me for a quote?
The location, the problem and the rough size of the job. If you can, email a few pictures.
How long will you be here?
A typical job takes a few hours for a handful of joints, longer for a whole elevation. Your quote will say how long we expect yours to take.
Can I do it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can you seal joints between two different materials?
Yes. The old joint is removed, both surfaces cleaned and primed where needed, and a flexible sealant applied. We pick a colour that works with both materials.
Walls and rooflines in Abbotts Ann
Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
In the older streets around Church of St Mary the Virgin, older walls, gutters and the joints where extensions meet them need a flexible sealant. Letting a property close to Andover station? Then split movement joints are easy to miss on a rental until damp shows inside.
Abbotts Ann is about 3 miles south-west of Andover, in Hampshire. If you need external mastic in Abbotts Ann, please ring 0345 464 0079 or drop us an email for a quick quote. We cover Hampshire from our Crawley base, Abbotts Ann included. Abbotts Ann is one of 683 towns and villages in Hampshire where we work for external mastic. Our Southampton page covers work nearby (20 miles or so).
Here we cover the SP11 postcode area for external mastic. Whether your property is on Catherines Walk, Duck Street and Manor Close or anywhere close by, our applicators can take on the job. Close by, we work in Little Ann (1 mile east), Red Rice (1 mile south-east), Anna Valley (1 mile east), Monxton (1 mile north-west) and Amport (2 miles west). Further out, we also cover Winchester (13 miles south-east), Andover (3 miles north-east), Chandler's Ford (15 miles south-east), Romsey (14 miles south), Hyde (12 miles south-east) and Tidworth (7 miles north-west).
Near you in Abbotts Ann
Typical jobs here are in homes near The Eagle pub, John Hanson Community School and Redrice School and the streets around them. The nearest railway station is Andover station, about 2.3 miles north-east. Nearby you will also find Andover Museum (2.7 miles north-east) and Andover War Memorial Hospital (2.4 miles north-east). For a walk, there’s Mill Lake and Quarley Hill.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
How it works
Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it usually takes a few hours to a few days, depending on the length of joint and the access. Somewhere as small as Abbotts Ann, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- Each joint is checked and the colour of the new sealant agreed.
- Failed sealant is removed back to clean, sound faces.
- Backing rod goes in so the sealant can stretch between the two faces.
- We prime the faces where required.
- We gun in low-modulus sealant and tool it neatly.
How to prepare
- Keep children and pets away from the work area
- Clear items away from the joints we are working on
- Let us know about earlier repairs to the joints
Getting a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.
Advice
Quotes for external mastic in Abbotts Ann
Your quote is based on your job. We look at:
- Working hours on commercial sites
- How many rooms, windows or areas are involved
- Which sealant suits the joint
- Any mould that needs treating
Leaving a failed joint generally makes the job bigger, not smaller. If you’re unsure, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
What we need to know
Photos help, but a description is a good start. Try to tell us:
- Where the job is, and your postcode
- A few photos by email, if you can
- How many joints, rooms or windows are involved
- Whether it’s a home or a business
Asking for a quote is easy: tell us what needs doing and where and its rough size. A few pictures by email make the job easier to understand, and we will come back to you with a quote.
How the job changes by surface
Copings and trims
Joints in copings, parapets and trims are exposed to the worst of the weather. We reseal them with an exterior sealant suited to the material.
Joints between dissimilar materials
Each side of the joint may need its own preparation. Both surfaces are cleaned and primed as the product requires.