Perth and Kinross · Scotland
Commercial & hotel sealant in Scone, Perth and Kinross
Sealant work for offices, hotels, washrooms and commercial buildings for Scone, backed by a one-year guarantee. Ask us for a quote.
- Failed joints in office kitchens and tea points
- Tired sealant ahead of a health and safety audit
- Mouldy bathrooms flagged at a tenancy check
Commercial sealant for homes and businesses in Scone
Landlords and agents with several properties can have bathrooms and kitchens resealed between tenancies. We can quote for several properties at once to keep things simple. If you have repeated reseals that don’t last and washroom sealant that looks dirty however often it’s cleaned, we can put it right, on hotel bathrooms, student & care accommodation and welfare facilities alike.
For holiday lets, guest houses and community buildings in or near Scone, washroom and kitchen sealant and any fire-rated joints need the same attention as anywhere.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Scone (PH2)
- Region
- Perth and Kinross
- Guarantee
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
When to call us in Scone
Staff kitchens and food areas see constant splashing and wiping, so sealant there wears and stains. Worktop and sink joints are often the first to go.
These are the problems we’re asked about most:
- Sealant failing again soon after quick repairs
- Shower leaks reaching the floor below
- Joints that need doing before an inspection or audit
- Split sealant around staff kitchen worktops and sinks
In and around Scone, as anywhere, good commercial sealant starts with a clean, dry, properly prepared joint.
What to look for in a quote
- Who turns up on the day
- What the quote includes, VAT included or not
- When the joint can take water or movement
- What happens if the job turns out different
What affects the cost of commercial sealant
Call for a quick quote. The main things that affect it are:
- The type of sealant required
- How many areas need sealing
- How easy the joints are to reach
- When we can work, for business premises
Doing several joints on one visit usually makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We’ll send you a clear quote for the lot.
Helping us quote
To make quoting easier, let us know:
- What’s wrong with the joints now
- Whether it’s a home or a business
- How many joints, rooms or windows are involved
- Any access issues, like height or stairs
Want a quote for commercial sealant? Please drop us a line at info@mrmastic.co.uk with a few details. You will know what we plan to do, and what it will cost, before any work begins.
What we do, step by step
When we arrive, we start by going over the job with you. We protect the surfaces around the joints before we start. Most jobs take anything from a few hours to several days, depending on the number of rooms. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- The first visit is a look round the site to agree the scope.
- We agree when we’ll work, with early or out-of-hours slots where they can be arranged.
- Areas are protected and the failed sealant removed.
- Once dry, every joint is resealed and tooled.
- We let your team know the cure time for every area.
Getting ready for the visit
- Tell us about any water getting in
- Let us know about parking restrictions
- Let us know about stairs, lifts or work at height
Ask for a quote
To get a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.
Advice
What we cannot put right
We will not take on work that won’t last, so these are the limits:
- Tiles coming off the wall
- Assessing what fire stopping a building needs
- A broken extractor fan behind the mould problem
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly.
What we seal
- Welfare facilities
- Rental portfolios
- Retail & leisure sites
- Hotel bathrooms
- Office washrooms & kitchens
- Student & care accommodation
Nearby places to Scone
What else we do in Scone
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Tell cleaning staff when each room can be used
- Put a squeegee in each shower
- Act on lifting sealant before it leaks
- Keep a record of which rooms were resealed and when
Squeegees in guest and staff showers help: walls and trays dry faster, and so does the sealant.
Planned resealing is easier to manage than emergency repairs. Rooms can be scheduled around occupancy and staff, rather than closed at short notice.
For landlords and businesses
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
For anyone letting property in or around Scone, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.
Workplaces and buildings in Scone
In Scotland, private landlords have to meet the Repairing Standard, and keeping sealant sound across a portfolio is part of that. Scone has hotels and guest accommodation in and around it. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
Letting a property close to Perth station? Then sealant work can be quoted for a single flat or a whole portfolio.
Scone is about 2 miles north-east of Perth, in Perth and Kinross. Whether you’re in the middle of Scone or further out, commercial sealant is available for homes and businesses alike. 107 places in Perth and Kinross are on our list, large and small. There’s also a page for Dundee, roughly 17 miles from Scone.
Jobs for commercial sealant in PH2 is quoted and booked the same way as anywhere else. If you need commercial sealant at a property on Woollcombe Square, Union Road and Mansfield Road or a nearby road, our applicators can take on the job. We also cover the places around Scone: Stormontfield (3 miles north-west), Tulloch (3 miles west), Letham (3 miles south-west), Luncarty (3 miles north-west) and Hillyland (3 miles west). Larger places within reach include Blairgowrie and Rattray (12 miles north), Auchterarder (14 miles south-west), Kinross (15 miles south), Alyth (15 miles north-east), Coupar Angus (10 miles north-east) and Oakbank (3 miles south-west). Being one of Perth and Kinross’s larger places, Scone has every kind of property, from flats to offices.
Local landmarks in Scone
Typical jobs here are in homes near North Inch, among other places. Scone’s nearest station is Perth station, roughly 2.4 miles south-west of the centre. A little further out are Scone Palace (1.4 miles west) and Perth Royal Infirmary (1.4 miles south). Not far away are Kinnoull Hill.
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Your questions about commercial sealant in Scone
I let a flat near Perth station. Can you help?
Yes, rental work is part of what we do. You can email us at info@mrmastic.co.uk with the address and a few details, and we’ll give you a fixed price before work begins.
Do you work in hotels near Scone?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Is there a guarantee?
Yes. Each job is guaranteed for twelve months, large or small.
How long will you be here?
A typical job takes a few hours for a single washroom, longer for a whole building. Your quote will say how long we expect yours to take.
Do the sealants smell?
It depends on the product. Some products have a noticeable smell, others very little.
How long do rooms need to be out of use?
Usually after around 24 hours. Each room is handed back with the cure time for the product used.
Will you leave a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.