Argyll and Bute · Scotland
Kentallen Commercial Sealant
Specialist commercial sealant for Kentallen: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Washrooms that need sorting before an inspection
- Failed joints in office kitchens and tea points
- Silicone laid over old silicone by a previous contractor
Surface by surface
Office washrooms & kitchens
In staff kitchens, we degrease joints before resealing, using a food-safe sealant by sinks where it’s needed.
Welfare facilities
Failed sealant in welfare areas is a simple fix before an audit. Tell us your deadline and we’ll plan the work and cure time around it.
About our commercial sealant in Kentallen
Mr Mastic brings more than 20 years’ experience to commercial sites, and we’re fully insured and ARBOMaster approved. If your site needs RAMS or insurance details, tell us, and we’ll confirm what we can provide. If you have mouldy bathrooms flagged at a tenancy check and tired sealant ahead of a health and safety audit, we can put it right.
In a smaller place like Kentallen, commercial jobs are more likely to be a hotel, guest house, school, surgery or community hall than an office block. All of them have washrooms, kitchens and fire-rated joints that need looking after.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Kentallen (PA38)
- Wider area
- Argyll and Bute
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Work for landlords, hotels and businesses
We work for letting agents and landlords as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
We also work for property managers and facilities teams. We can quote a run of properties together, and we’re fully insured.
How we quote for commercial sealant
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- Whether old sealant or filler has to be cut out
- Whether the work is at height
- Mould in or behind the old joints
- How many rooms, windows or areas are involved
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
What to tell us for a quote
When you call or email, it’s useful to know:
- Any previous sealing or DIY work
- If it’s domestic, commercial or a hotel
- A few pictures by email, if you can
- Access, such as stairs, a lift or height
We don’t publish a price list. Instead, we give you a clear price for your job. To get started, send an email to info@mrmastic.co.uk.
Places near Kentallen
Also in Kentallen
Workplaces and buildings in Kentallen
For seaside hotels, guest houses and holiday lets around Kentallen, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Private landlords in Scotland must meet the Repairing Standard, and keeping sealant sound across a portfolio is part of that.
For jobs in and around Kentallen, choosing the right material for each joint is as important as a tidy finish.
Kentallen is in Argyll and Bute. Homes, rented property, offices and hotels in Kentallen can book us for commercial sealant. Every job comes with our one-year guarantee. Our area takes in 118 places across Argyll and Bute, from the larger towns to small villages. Glasgow is on our list too, around 68 miles away.
Here we cover the PA38 postcode area for commercial sealant. Other places close to Kentallen include Duror (2 miles south-west), Clo Mhuillin (3 miles north), Inchree (3 miles north), Corran (3 miles north) and Ballachulish (4 miles east). Island and remote addresses take a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.
Around Kentallen
Open spaces near Kentallen include Ardsheal Hill and Lochan na Luireach.
Your questions about commercial sealant in Kentallen
Is there a guarantee on commercial sealant in Kentallen?
Every job comes with our 12-month guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.
Will you come out to Kentallen?
Yes. Kentallen is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Will the old sealant be removed?
Yes, every time. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Can you seal over the old sealant?
No, and we never do. It can look neat for a few weeks, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
How long does commercial sealant take?
A typical job takes a few hours per area, with larger sites planned over several visits, including preparation and clearing up. Your quote will say how long we expect yours to take.
When can guests or staff use the shower again?
Generally after around 24 hours. We give a cure time for each area.
Will you leave a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
Do I have to be there?
Access is agreed with you when the job is booked. Indoors, that normally means someone at home.
What we do, step by step
On the day, we start by going over the job with you. We protect the surfaces around the joints before we start. The work usually takes a few hours for a single washroom, longer for a whole building. Outside jobs in Kentallen need a dry day, because sealant won’t bond to a wet joint, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- We start with a site walk to agree the rooms and the timing.
- Every area is sheeted and the old silicone stripped out.
- Joints are cleaned, treated for mould and dried.
- Anti-fungal sanitary silicone goes into wet areas, with suitable sealants elsewhere.
- We check every room and give its cure time for housekeeping.
Getting ready for the visit
- Let us know about parking restrictions
- Where the joints are inside, avoid wetting them before we arrive
- Tell us about any water getting in
Get a quote
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we will talk you through the work before giving you a price.
Related advice
Do you need commercial sealant in Kentallen?
Heavy use means more movement: people of all sizes, daily cleaning and constant loading. A tray that is not fully supported soon tears its seal.
These are the problems we’re asked about most:
- Failed joints in office kitchens and tea points
- Leaks from showers into rooms or ceilings below
- Sealant failing again soon after quick repairs
- Black, stained silicone in guest bathrooms
Around Kentallen, as everywhere, commercial sealant is only as good as the preparation behind it.
Comparing quotes
- What product goes in the joint
- Which colour the sealant will be
- How long the guarantee is
- Who turns up on the day
Why it’s worth doing now in Kentallen
A leaking shower in a hotel room or flat above can damage the ceiling below. Then two rooms are out of action, not one. Resealing first is the smaller job. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Why us?
- Every job guaranteed for a year
- A sealant colour to suit the surroundings
- Anti-fungal silicone where joints get wet
- Tidy, careful work
Aftercare tips
After the cure time, these simple habits help:
- Include the silicone on your room checklists
- Encourage users to squeegee shower walls
- Tell cleaning staff when each room can be used
- Book larger programmes for quieter times of year
Strong chemicals and scourers wear silicone out faster. A mild cleaner and a soft cloth is enough for the joints.
Water from a failed shower seal can travel: into ceilings below, walls next door and service voids. Dealing with the joint early stops that spread.