Surrey · England
Brewer Street Commercial Sealant
Problem with your washrooms, bathrooms and kitchens in Brewer Street? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Failed joints in office kitchens and tea points
- Black, stained silicone in guest bathrooms
- Whole floors of tired en suites
Commercial sealant for homes and businesses in Brewer Street
Mouldy or split sealant in a commercial building causes more than a bad impression. It’s a cleaning problem, a leak risk and something guests and staff notice. Our applicators renew sealant across washrooms, welfare areas, kitchens and guest bathrooms. We work on office washrooms & kitchens, student & care accommodation and retail & leisure sites, and people most often call us about shower leaks reaching the floor below and mouldy washroom sealant that staff and guests notice.
For a small place like Brewer Street, the journey and timings are agreed in advance, so it can be fitted around guests, customers or events where possible.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Location
- Brewer Street (RH1)
- Wider area
- Surrey
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Why act early in Brewer Street
A leaking shower in a hotel room or flat above can damage the ceiling below. That means a second room out of use and a repair to pay for. Resealing first is the smaller job. Around Brewer Street, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Why book with us
- Rated 4.9 stars on Google
- Sealant colour chosen to suit
- A choice of colours where the product allows
- Old sealant always removed completely
Take a look at our cost guide and what customers say.
When to call us in Brewer Street
In office kitchens and tea points, joints are wet and wiped all day, so sealant there wears and stains. The worktop and sink edges normally fail first.
The most common problems we see are:
- Tired sealant ahead of a health and safety audit
- Tired sealant in let properties
- Black, stained silicone in guest bathrooms
- Leaking joints in shower rooms and changing areas
If you let a flat or house near Merstham station, several rental properties can be resealed on one programme.
Before booking anyone
- Whether VAT is included
- Whether all the old sealant comes out first
- How hidden problems are handled
- How the colour is chosen
Landlord and commercial work in Brewer Street
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.
What we can’t put right
We’d rather tell you now than do work that will not last, so here’s what sealant cannot put right:
- Extraction that is not working, which needs an electrician or ventilation contractor
- Water damage behind the tiles that needs a tiler or builder
- Cracked trays or baths rather than failed joints
Not sure which it is? You can phone 0345 464 0079 or send us an email and we’ll tell you honestly.
Surfaces we seal
- Welfare facilities
- Hotel bathrooms
- Student & care accommodation
- Office washrooms & kitchens
- Retail & leisure sites
- Rental portfolios
Commercial sealant around Brewer Street
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Bletchingley Village Primary School are buildings too, and sealant in washrooms, kitchens and changing areas can be renewed around term times or opening hours. For buildings such as Church of St Mary the Virgin, its kitchen and washroom sealant needs looking after like anywhere else.
Brewer Street is about 2 miles south of Caterham, in Surrey. Our applicators cover commercial sealant for homes and businesses in Brewer Street and the surrounding area. Brewer Street is one of 395 places in Surrey we cover. You can also see our page for Crawley, roughly 11 miles from Brewer Street.
Every address in RH1 is covered for commercial sealant, from the main roads to the quietest streets. That includes homes and businesses on Whitehill Lane and Brewer Street. Close by, we work in Nutfield (1 mile south-west), Chaldon (2 miles north), South Merstham (2 miles west), Merstham (2 miles north-west) and South Nutfield (2 miles south-west). Larger places within reach include Epsom (9 miles north-west), Horley (6 miles south-west), Redhill (3 miles west), Ewell (10 miles north-west), Reigate (4 miles west) and Dorking (10 miles west).
Around Brewer Street
Locally, jobs take us to homes and businesses close to Merstham Park School, Oakhyrst Grange School and The Prince Albert Public House, among other places. The nearest railway station is Merstham station, roughly 2.2 miles west of the centre. A little further out are East Surrey Museum (2.2 miles north-east) and The Belfry (3.1 miles west). For a walk, there’s Mercers Lake and Bay Pond.
Common questions in Brewer Street
Can you help a landlord with a rental near Merstham station?
Yes. We work for letting agents and landlords as well as homeowners. You can phone 0345 464 0079 or email us with the details for a clear quote.
Is Brewer Street within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and you will get one quote.
How long does commercial sealant take?
Most jobs take a few hours for a single washroom, longer for a whole building, including the preparation. Your quote will say how long we expect yours to take.
Is it messy?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
What should I tell you?
The location, the problem and the rough size of the job. Photos by email help too.
Do the sealants smell?
There can be a smell while the sealant cures, which fades as it sets. Ventilation helps.
Are you ARBOMaster approved?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
What happens on the day
At the end, we look at the finished work together. The visit itself normally takes a few hours for a single washroom, longer for a whole building, depending on how much there is to do. Somewhere like Brewer Street needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- Tell us the rooms, hours and site rules, and we’ll plan the programme.
- Tell us what paperwork your site needs, and we confirm what we can supply before any work starts.
- Old sealant is cut out room by room and joints cleaned and treated.
- Anti-fungal sanitary silicone goes into wet areas, with suitable sealant elsewhere.
- Rooms are handed back in order, each with its cure time.
Preparing for the visit
- Mention any tricky access
- Try not to wet indoor joints just before the visit
- Tell us about any previous sealing or DIY attempts
Getting a quote
Call for a quick quote, or email us if that is easier. Describe what needs sealing and we’ll explain what’s involved and send you a clear quote.
Related advice
Nearby places to Brewer Street
What else we do in Brewer Street
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Looking after it afterwards
How long the joints last depends on use and care. Here’s what we suggest:
- Report broken fans quickly
- Add sealant to your planned maintenance checks
- Plan resealing around quiet periods
- Use mild cleaners on sealant, not bleach or abrasives
Include sealant in routine room inspections. A quick look at each bathroom when rooms are checked spots problems early.
Rooms out of use cost a hotel or landlord money. Catching faults early means they can be put right in a short window, before they become leaks that take the room out of use.