Kent · England
Bathroom & kitchen resealing in Yalding, Kent
Bath, shower, basin, wet room, worktop and sink resealing for Yalding, backed by a 12-month guarantee. Ask us for a quote.
- Water getting behind the kitchen upstand
- A joint torn by a bath that flexes
- Water getting behind the bath panel
About our bathroom resealing in Yalding
Sealant is the soft line between a bath, shower or worktop and the wall. Once it cracks or goes mouldy, water starts to find its way through. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. If you have water getting behind the kitchen upstand and water escaping at the shower enclosure, we can put it right, whatever the surface.
In a village or hamlet like Yalding, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Our work is backed for twelve months.
- Location
- Yalding (ME18)
- Wider area
- Kent
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Questions from Yalding
I let a flat near Yalding station. Can you help?
Yes, rental work is part of what we do. You can call 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Do you cover Yalding for bathroom resealing?
Yes. Our work covers London and the South East, and Yalding is part of that. You can call 0345 464 0079 or send us an email and let us know what needs doing, and we’ll give you a clear price.
How long does the new silicone need before I use the shower?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or follow the cure time we give you.
Is the work guaranteed?
Yes. All our work comes with a 12-month guarantee, and we’re fully insured.
Do you work for hotels and businesses?
Yes, regularly. Larger jobs can be planned room by room or area by area.
Will it make a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Do you hold any approvals?
Yes. We hold ARBOMaster approved applicator status, and we are fully insured.
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.
How the visit works
There’s no need to move everything out, only the area right around the joints. Everything nearby is protected, and the work takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen for a typical job. Somewhere as small as Yalding, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First the area is protected and every bit of old sealant removed.
- Next, the joint is cleaned and any mould is treated.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We tidy up and give you the cure time, normally around 24 hours.
How to prepare
- Keep children and pets away from the work area
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any parking rules near the property
How to get a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we will take it from there.
Related advice
What bathroom resealing looks like in Yalding
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Yalding station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Yalding is about 5 miles south-west of Maidstone, in Kent. Homes, rented property, offices and hotels in Yalding can book us for bathroom resealing, old or new, large or small. Every job comes with our one-year guarantee. Yalding is one of 922 places in Kent we cover. For nearby work, see our Crawley page, about 28 miles away.
Here we cover the ME18 postcode area for bathroom resealing. That includes homes and businesses on High Street, Windmill Path and Blunden Lane and the roads around them. Nearby, we also carry out bathroom resealing in Congelow (1 mile south), Benover (1 mile south), Hunton (1 mile south-east), Nettlestead Green (1 mile north-west) and Laddingford (1 mile south-west). Larger places within reach include Maidstone (5 miles north-east), Sittingbourne (15 miles north-east), Sevenoaks (11 miles west), Royal Tunbridge Wells (10 miles south-west), Gravesend (14 miles north) and Tonbridge (7 miles west).
Landmarks near Yalding
Typical jobs here are in homes near Quarry Wood and The Walnut Tree Public House, among other places. The nearest railway station is Yalding station, roughly 1 mile west of the centre. A little further out are Oakwood Hospital (3.7 miles north-east) and Teapot Island (0.8 miles south-west).
How we quote for bathroom resealing
We do not publish a price list, because no two jobs are the same. What we look at:
- How many areas need sealing
- How easy the joints are to reach
- Which sealant suits the joint
- Working hours on commercial sites
Leaving a failed joint generally makes the job bigger, not smaller. If you are not sure whether it needs doing, ring 0345 464 0079 or email us for an honest opinion and a quote.
What to tell us for a quote
When you contact us, these details help:
- Where the job is, and your postcode
- Any previous sealing or DIY work
- A few pictures by email, if you can
- Any access issues, like height or stairs
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. When it suits you, phone 0345 464 0079 or email us.
Signs you need bathroom resealing in Yalding
Black mould is behind a lot of resealing. Bathrooms without good ventilation give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
People usually contact us when they notice something like this:
- Leaking joints on a shower screen
- Smears of silicone across the tiles
- Cracked, shrunken or lifting silicone
- Mouldy sealant that has gone black
For an older house near a landmark such as St Peter's and St Paul's Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Questions to ask before booking
- What preparation is included
- Who turns up on the day
- Are they insured?
- What guarantee comes with the work
What the job involves on each surface
Baths
Baths move more than any other fitting, so we fill it with water before sealing. That way the joint is laid with the bath at its heaviest.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. It’s resealed in white, clear or a colour to suit.
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly.
Nearby places to Yalding
Other services in Yalding
Looking after it afterwards
A little care helps the new joints last. We recommend:
- Don’t leave water standing on kitchen joints
- Give the silicone its full cure time
- Never pick at the silicone with a blade
- Move toiletries away from the joint
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the bead dries out between uses.
Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and renewing it as soon as it fails protects everything around it.
Why act early in Yalding
Mould removers can fade the surface of a stained bead, but mould that has grown into the sealant tends to return. The lasting answer is to remove the bead and start again. Older cottages and farmhouses around Yalding can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we will explain the quote if you ask.
Why us?
- A choice of colours where the product allows
- We are fully insured
- A sealant colour to suit the surroundings
- We never seal over old sealant
See what affects the cost and our reviews.