Hampshire · England
Bathroom Resealing in Wittensford
Bathroom resealing in Wittensford from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Splits where the tray meets the wall
- Smears of silicone across the tiles
- Cracked, shrunken or lifting silicone
About our bathroom resealing in Wittensford
Mr Mastic has more than 20 years’ experience of sealant work, and our applicators reseal bathrooms and kitchens across Wittensford. We are fully insured ARBOMaster approved applicators, and every job carries our one-year guarantee. Common call-outs are for gaps where the bath or tray has moved and water getting behind the bath panel, on kitchen worktops & upstands, wet rooms and sinks & splashbacks.
Being in a small place like Wittensford makes no difference to the job itself: it just means planning the journey and access beforehand. In the bathroom or kitchen, the work is the same as in any town.
Each job carries a 12-month guarantee, large or small.
- Place
- Wittensford (SO43)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quotes
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Honest limits
We will always be straight with you, so here’s what new sealant won’t do:
- Movement from a bath with loose feet or no proper support
- Tiles that have come away from the wall
- A cracked shower tray or bath (that needs repair or replacement)
If you are not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer.
Joints and surfaces we work on
- Sinks & splashbacks
- Kitchen worktops & upstands
- Wet rooms
- Shower trays & enclosures
- Baths
- Basins & vanity units
Different surfaces, different methods
Basins & vanity units
Basin joints are short and close to eye level: the bead is right in front of you, so it’s tooled cleanly and evenly, finished in a colour that suits the basin.
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, because cooking grease stops sealant bonding. Proper degreasing is what helps the new joint last.
What else we do in Wittensford
How it works
Good joint work is mostly preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes half a day or less for one room, longer when the kitchen is included. Somewhere like Wittensford needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We protect the area and cut out all of the old sealant.
- Next, the joint is cleaned and any mould is treated.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We tidy up and give you the cure time, generally around 24 hours.
Before we arrive
- Mention any parking rules near the property
- Move anything stored near the joints
- Let us know about earlier repairs to the joints
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Advice
When to call us in Wittensford
Sealant laid on a damp, dusty or greasy joint never bonds properly. Traces of soap, bath oil and old sealant stop it gripping, and a joint that looked fine soon begins to come away.
The most common problems we see are:
- Water getting behind the bath panel
- A messy, uneven bead from a previous reseal
- A bead that has pulled away from the tiles
- Water escaping at the shower enclosure
In and around Wittensford, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Questions to ask before you book
- What happens if they find a problem under the old sealant
- Is VAT in the price?
- Whether they seal over old material or remove it
- Whether the sealant suits the joint
Questions from Wittensford
Do you work for landlords with property near Ashurst New Forest station?
Yes, landlords and agents are among the people we work for. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we’ll send you a clear quote.
Do you cover smaller places like Wittensford?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is there any odour?
It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.
Where is Mr Mastic based?
We’re based in Crawley, West Sussex, and we work across South East England, London and Scotland.
Can new silicone go straight over the old?
No. New silicone won’t bond to old silicone, so it lifts and traps water and mould underneath. All the old sealant comes out first.
Can you reseal around my kitchen sink and worktop?
Yes, often alongside a bathroom. Next to the sink we use a food-safe product where it’s needed.
Can you quote for more than one area?
Yes, we can. Several rooms, windows or areas can go on one quote.
Can you get rid of the black mould in my sealant?
Yes. Mould inside the bead rarely cleans out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
What affects the cost of bathroom resealing
For a quick quote, just ask. The main things that affect it are:
- Any mould that needs treating
- How much old sealant there is and how hard it is to remove
- How many rooms, windows or areas are involved
- The product the joint needs
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Helping us quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Access, such as stairs, a lift or height
- The address or postcode of the job
- Any previous sealing or DIY work
- The type of property
We quote each job on its own, so start by telling us what you need. Simply call 0345 464 0079 or send us an email and describe the job and send photos if you have them.
Bathrooms and kitchens in Wittensford
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Letting a property close to Ashurst New Forest station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Wittensford is about 4 miles west of Totton, in Hampshire. For bathroom resealing in and around Wittensford, please call 0345 464 0079 or email us for a quick quote. We cover Hampshire from our Crawley base, Wittensford included. Across Hampshire, we cover 683 places, Wittensford among them. We also work in Southampton, about 9 miles from Wittensford.
Postcode districts we cover here for bathroom resealing: SO43. We also cover the places around Wittensford: Cadnam (1 mile east), Newbridge (1 mile north-east), Minstead (2 miles south), Bartley (2 miles east) and Copythorne (2 miles east). Larger places within reach include Winchester (15 miles north-east), Eastleigh (11 miles east), Totton (4 miles east), Chandler's Ford (10 miles north-east), Hedge End (13 miles east) and Lymington (12 miles south).
What’s near Wittensford
In Wittensford, that means homes and buildings near Sir John Barleycorn Inn, among other places. The closest station to Wittensford is Ashurst New Forest station, about 3.8 miles south-east of the centre. A little further out are Tatchbury Mount Hospital (3 miles east). The countryside around Wittensford includes Copythorne Common.
DIY versus a professional finish
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.