Hampshire · England
Bathroom Resealing in West Liss
Bathroom resealing in West Liss from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- A messy, uneven bead from a previous reseal
- Black mould in the silicone that will not clean off
- Failed sealant on the screen profile
How the visit works
Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Somewhere like West Liss needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We protect the area and cut out all of the old sealant.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We tidy up and give you the cure time, normally around 24 hours.
Getting ready for the visit
- Mention any leaks or damp you’ve noticed
- Let us know about stairs, lifts or work at height
- For business premises, tell us about site rules or sign-in
How to get a quote
If you are in West Liss and need bathroom resealing, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and we’ll agree the price before any work begins.
Advice
Bathroom resealing in West Liss, done properly
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. We work on kitchen worktops & upstands, wet rooms and sinks & splashbacks, and the jobs we see most are water escaping at the shower enclosure and smears of silicone across the tiles.
For a small place like West Liss, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
There’s a 12-month guarantee on every job, large or small.
- Location
- West Liss (GU33)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
West Liss questions
Do you work for landlords with property near Liss station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before work begins.
Do you cover smaller places like West Liss?
Yes. West Liss is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before resealing.
What colours of sealant can you use?
There’s a choice: clear, white and colours chosen to suit the room. We’ll talk it through when we quote.
Are you an approved applicator?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Is it OK to put new sealant on top of the old bead?
No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.
How long before the new sealant can get wet?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or as long as we advise for that product.
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Sprays can fade the marks, but cutting it out and resealing is what lasts. Airing the room well helps stop it returning.
Do you need bathroom resealing in West Liss?
Black mould is behind a lot of resealing. Steamy rooms that do not dry out give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
The problems people usually mention when they call are:
- Mouldy sealant that has gone black
- Two layers of silicone, both failing
- A bead that has pulled away from the tiles
- A messy, uneven bead from a previous reseal
Letting a property close to Liss station? Then mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
What to look for in a quote
- How the joint is cleaned and prepared
- Is the old sealant removed completely?
- Which colour the sealant will be
- Whether they’re fully insured
What affects the cost of bathroom resealing
You will get a clear quote before any work starts. It’s based on:
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
- Working hours on commercial sites
- The number and length of the joints
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you’re not sure whether it needs doing, ring 0345 464 0079 or send us an email for an honest opinion and a quote.
What to tell us for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Whether it’s a home or a business
- What the problem is, such as mould, gaps, leaks or cracking
- Access, such as stairs, a lift or height
- Any previous sealing or DIY work
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. Whenever you are ready, phone 0345 464 0079 or email us.
Why deal with it now?
The difference in a professional reseal is mostly what you do not see: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Skip those steps and even the best silicone fails early. Older cottages and farmhouses around West Liss can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.
What you get with us
- Anti-fungal silicone where joints get wet
- We’re fully insured
- Any old sealant cut out fully, not covered over
- Approved under the ARBOMaster scheme
Read our cost guide or customer reviews.
What bathroom resealing looks like in West Liss
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as Liss Infant School, we reseal washrooms and kitchens in schools and businesses as well as homes. For an older house near a landmark such as Church of St Mary, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
West Liss is about 3 miles north-east of Petersfield, in Hampshire. From the centre of West Liss to the outskirts, bathroom resealing is available for homes and businesses alike. 683 places in Hampshire are on our list, from the larger towns to small villages. We also work in Portsmouth, around 18 miles away.
Here we cover the GU33 postcode area for bathroom resealing. That includes homes and businesses on Syers Road, Willow Road and Inwood Road. Neighbouring places we cover for bathroom resealing include Liss (1 mile north-east), Durford Wood (1 mile south), Hill Brow (1 mile south-east), Liss Forest (1 mile north) and The Mint (1 mile north-east). We also work in nearby towns such as Havant (13 miles south), Horndean (10 miles south-west), Aldershot (15 miles north), Alton (8 miles north-west), Waterlooville (12 miles south-west) and Petersfield (3 miles south-west).
Around West Liss
Typical jobs here are in homes near Crossing Gates pub, among other places. West Liss has its own railway station: Liss station. Well-known places in the area include Bear Museum (3.1 miles south-west) and Petersfield Community Hospital (3.2 miles south-west). For a walk, there’s Wheatham Hill and Liss Riverside Railway Walk South.
Landlord and commercial work in West Liss
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll quote.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Give the silicone its full cure time
- Keep scourers and sharp tools away from the bead
- Stick to a soft cloth and a mild cleaner
- Wipe up water along the back of the worktop
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the bead dries out between uses.
Don’t wait for a refit to deal with failed sealant. Sealant is a maintenance item, like the paint on a window frame, and renewing it as soon as it fails protects everything around it.
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.