West Sussex · England
Bathroom Resealing in West Kingston
Problem with your baths, showers and worktops in West Kingston? We remove the old material, prepare the joints and seal them properly, with a one-year guarantee.
- Splits where the tray meets the wall
- Leaks into the floor or ceiling below
- Black mould in the silicone that won’t clean off
West Kingston homes and their sealant
West Kingston is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
In the older streets around St Andrew's Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Letting a property close to Angmering station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
West Kingston is about 3 miles east of Littlehampton, in West Sussex. For bathroom resealing in and around West Kingston, it’s easy to get a quote: please phone 0345 464 0079 or send us an email. We cover West Sussex from our Crawley base. West Kingston is one of 371 places in West Sussex we cover for bathroom resealing. We also work in Brighton, around 15 miles away.
We cover every part of BN16 for bathroom resealing and the streets around it. You will find streets such as Coastal Road and Golden Acre, and we cover them all. Other places close to West Kingston include Angmering-on-Sea (1 mile west), Kingston Gorse (1 mile east), East Preston (1 mile north-west), Ferring (1 mile east) and Hangleton (1 mile north-east). Within a short drive, we also cover Worthing (3 miles north-east), Bognor Regis (10 miles west), Chichester (14 miles west), Selsey (15 miles west), Littlehampton (3 miles west) and Shoreham-by-Sea (9 miles east).
Local landmarks in West Kingston
In West Kingston, that means homes and buildings near The Angmering School and the streets around them. The nearest railway station is Angmering station, roughly 1.2 miles north-west. A little further out are Rustington Museum (1.6 miles west) and Old Castle (3.6 miles north-east). Green spaces nearby include Highdown Hill.
Bathroom resealing in West Kingston, done properly
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. If you are dealing with new sealant laid over old sealant that is now lifting and gaps between the worktop and the wall, we can put it right, on wet rooms, kitchen worktops & upstands and sinks & splashbacks alike.
Somewhere as small as West Kingston, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
A one-year guarantee comes as standard, so you are not left on your own once the job is done.
- Location
- West Kingston (BN16)
- Wider area
- West Sussex
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
For landlords and businesses
Housing providers, facilities teams and property managers book us too. Several sites can be quoted together, and we’re fully insured for the work.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. Several properties can go on one quote.
FAQs for West Kingston
I let a flat near Angmering station. Can you help?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we’ll send you a clear quote.
Do you cover smaller places like West Kingston?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
How much does bathroom resealing cost in West Kingston?
Size, access and the old material all affect the cost. Call for a quick quote and we will talk you through it.
Do I have to be there?
Access is agreed with you when the job is booked. Indoors, that normally means someone at home.
Can I choose the colour of the sealant?
Most people choose white or clear, but other colours can be used to suit tiles and worktops. Tell us what you’d like when you get in touch.
How long before the new sealant can get wet?
After around 24 hours in most cases. We’ll tell you the cure time for the product we used.
Do you have insurance?
Yes, we are fully insured.
Will there be a smell?
It depends on the product. Some smell for a while, some hardly at all.
Places near West Kingston
Also in West Kingston
Signs you need bathroom resealing in West Kingston
Sealing over old silicone is one of the commonest mistakes we find. Fresh silicone cannot grip the old bead underneath, so it peels, leaks and hides mould behind it.
Most people get in touch after spotting something like this:
- Water getting behind the kitchen upstand
- Black mould in the silicone that will not clean off
- New sealant laid over old sealant that is now lifting
- A bead that has pulled away from the tiles
If you look after a building such as East Preston Infant School, we reseal washrooms and kitchens in schools and businesses as well as homes.
What to look for in a quote
- Whether all the old sealant comes out first
- Whether the sealant suits the joint
- What happens if the job turns out different
- What insurance they hold
Surface by surface
Wet rooms
A wet room floor and its walls can move independently, so the corners need a flexible seal, not grout. Cracked grout in a corner can be cut out and replaced with silicone.
Basins & vanity units
Basins take less water than showers, but the joint behind them is splashed every day. Corners behind basins are where mould tends to start, so it’s cut out and renewed just like a bath joint.
What we cannot put right
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- Water getting in through the grout rather than the sealant
- A bath or tray that moves because it isn’t properly supported
- A leaking waste, trap or valve
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think.
Where we work in West Kingston
- Basins & vanity units
- Kitchen worktops & upstands
- Wet rooms
- Sinks & splashbacks
- Shower trays & enclosures
- Baths
DIY sealant or a professional job?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
What affects the cost of bathroom resealing
The price is agreed before any work begins. It takes into account:
- Any mould that needs treating
- The type of sealant required
- How much there is to do
- The old material and how stubborn it is
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, phone 0345 464 0079 or email us and we’ll give you an honest view and a quote.
Helping us quote
Photos by email are helpful but not essential. Please mention:
- If someone has resealed it before
- What’s wrong with the joints now
- A few photos by email, if you can
- The rough size of the job
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. When it suits you, call 0345 464 0079 or send us an email.
What we do, step by step
Most of a good job is in the preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes two to three hours for a typical bath, depending on how much old sealant there is. Somewhere like West Kingston needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
Getting ready for the visit
- Move anything stored near the joints
- Tell us about any previous sealing or DIY attempts
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
Need a quote? Please call 0345 464 0079 or email us and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.