Greater London · England

Bathroom & kitchen resealing in Tower Hill, Greater London

Bath, shower, basin, wet room, worktop and sink resealing in Tower Hill, with a 12-month guarantee on every job. Call for a quick quote.

  • Water escaping at the shower enclosure
  • Shrunken sealant along the back of a worktop
  • Lumpy, uneven sealant from a DIY attempt

Book bathroom resealing in Tower Hill

How we handle bathroom resealing in Tower Hill

Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a neat new joint puts that right in a short visit. It also seals the gaps that let water behind the bath. We’re often asked to deal with two layers of silicone, both failing and water getting behind the bath panel, on kitchen worktops & upstands, basins & vanity units and sinks & splashbacks.

In much of London, period terraces have been converted into flats over the years, with bathrooms fitted into whatever space was available. Small, steamy rooms are where mould gets into sealant and grout fastest, and homes in Tower Hill are no different.

All of our work is guaranteed for twelve months, in Tower Hill and everywhere else we cover.

Location
Tower Hill (SE1, E1, E1W)
Region
Greater London
Guarantee
12 months on all our work
Quotes
A clear price before work begins
Call
0345 464 0079
Page updated
26 October 2026
Silicone being applied where a shower enclosure meets beige wall tiles

Quotes for bathroom resealing in Tower Hill

Jobs vary more than people expect. What affects the quote:

  • When we can work, for business premises
  • Access and height
  • The number of rooms or windows
  • The amount of work

Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.

Asking for a quote

What to tell us when you ask for a quote:

  • Roughly how big the job is
  • Access, such as stairs, a lift or height
  • If it’s domestic, commercial or a hotel
  • Any previous sealing or DIY work

Every job is quoted individually, so start by telling us what you need. Just call 0345 464 0079 or email us with the details.

Landlords, agents and businesses in Tower Hill

Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements.

From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.

Looking after it afterwards

To keep the joints looking good and working properly:

  • Dry the bead with a towel now and then
  • Move toiletries away from the joint
  • Avoid abrasive pads on the sealant
  • Clean with a mild bathroom cleaner and a soft cloth

Keep water off the new bead until it has cured, which is normally around 24 hours. After that, a quick wipe after showering helps keep it clean.

Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning usually won’t remove it, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.

Tower Hill questions

I let a flat near London Fenchurch Street station. Can you help?

Yes, we work for landlords and letting agents. You can ring 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before work begins.

Do you work for hotels and guest houses in Tower Hill?

Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.

Will it make a mess?

No. We protect the surfaces around the joints, and we tidy up before we go.

Do you do kitchens as well as bathrooms?

Yes. Next to the sink we use a food-safe product where it’s needed.

Can I add another job to the visit?

Yes. Tell us about everything you’d like done and we’ll quote it together.

How long does it take to reseal a bath or shower?

A single bath or shower takes about a couple of hours, including cutting out the old sealant. A whole bathroom plus the kitchen may take most of the day.

Do you cover Tower Hill?

We do. Our applicators work in Tower Hill.

Can you get rid of the black mould in my sealant?

Yes, by replacing the sealant. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.

What the job involves on each surface

Basins & vanity units

Basins take less water than showers, but the joint behind them is splashed every day. Corners behind basins are where mould tends to start, and we treat it exactly as we would a bath.

Baths

A bath shifts slightly every time it’s filled, so it’s filled with water before the bead goes on. The joint is then laid with the bath at its lowest point and is not stretched when it’s used.

Leave it or put it right?

A clean new bead makes a room look cared for, which matters if you’re letting a property or selling it. A smeared, uneven DIY bead does the opposite, and it’s harder to put right later. Damp from a failed joint spreads quietly in older London brickwork and timber, and by the time it shows on a wall or ceiling in Tower Hill, the repair is bigger than the sealant job would have been.

Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, phone 0345 464 0079 or drop us an email for an honest opinion and a quote.

Why Tower Hill customers choose us

  • Rated 4.9 stars on Google
  • Anti-fungal silicone where joints get wet
  • Sealant colour chosen to suit
  • Over 20 years’ experience

See what affects the cost or what customers say.

Honest limits

We won’t take on work that will not last, so these are the limits:

  • A bath or tray that moves because it isn’t properly supported
  • Damage behind the tiles that needs a tiler
  • Failed grout lines across the wall

If in doubt, call 0345 464 0079 or send us an email and we’ll say what we think.

Where we work in Tower Hill

  • Shower trays & enclosures
  • Basins & vanity units
  • Baths
  • Wet rooms
  • Sinks & splashbacks
  • Kitchen worktops & upstands

How the visit works

When we arrive, we look over the joints with you first. We protect the surfaces around the joints before any work begins. Most jobs take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. In Tower Hill, flats, stairs and shared entrances are part of the routine. If the building has a concierge, managing agent or access rules, tell us when you book.

  1. We protect the area and cut out all of the old sealant, including the film left on the tiles.
  2. Next, the joint is cleaned and any mould is treated.
  3. We let it dry fully and fill the bath with water before sealing.
  4. We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
  5. We tidy up and give you the cure time, normally around 24 hours.

Before we arrive

  • Mention any leaks or damp you’ve noticed
  • Keep pets and children clear of the area while we work
  • Where the joints are inside, avoid wetting them before we arrive

Get a quote

For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work and send you a clear quote.

Get a price

Related advice

Bathroom resealing around Tower Hill

In a London flat, water from a failed bath or shower seal can reach the neighbours below, which is why it’s worth fixing early. There are hotels and other places to stay in and around Tower Hill. Hotel bathrooms are part of our work as well as homes, and can be done room by room.

For landlords with property near London Fenchurch Street station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. For site and facilities teams at buildings such as The Aldgate School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s. Tower Hill is in London, so parking needs planning: let us know about parking bays, permits or a driveway.

Tower Hill is about 1 mile north-east of London, in Greater London. We carry out bathroom resealing for homes and businesses in Tower Hill and the surrounding area. 764 places in Greater London are on our list, from the larger towns to small villages.

Every address in SE1, E1 and E1W is within our area for bathroom resealing, from the main roads to the quietest streets. If you need bathroom resealing at a property on Bush Lane, Swan Lane and Mark Lane or anywhere close by, our applicators can take on the job. With the A3 and A10 close by, Tower Hill is easy for our applicators to reach. Neighbouring places we cover for bathroom resealing include Aldgate (1 mile north), Bishopsgate (1 mile north), Spitalfields (1 mile north), Whitechapel (1 mile north-east) and St George in the East (1 mile east). Larger places within reach include City of Westminster (3 miles west), Marylebone (3 miles west), Kensington (5 miles west), Walthamstow (6 miles north-east), Hampstead (5 miles north-west) and Ruislip (15 miles west).

Local landmarks in Tower Hill

Typical jobs here are in homes near Bishopsgate Institute Special Collections and Archives, The Liberty Bounds pub and Fund Academy, among other places. Nearby too are St Mary-at-Hill (within half a mile north-west), William Curtis Ecological Park (less than half a mile south) and St Michael's Catholic College (0.7 miles south-east). There’s a railway station in Tower Hill itself: London Fenchurch Street station. A little further out are Tower of London (under half a mile east) and London Bridge Hospital (within half a mile south-west). For a walk, there’s Lavender Pond and Ludgate Hill.

Map of Tower Hill © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job