Kent · England
Bathroom Resealing in Throwley
Specialist bathroom resealing for Throwley: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Smears of silicone across the tiles
- Two layers of silicone, both failing
- Black spots spreading through the bead
Looking after it afterwards
Looking after new joints is easy, and it makes a real difference:
- Dry the bead with a towel now and then
- Do not leave water standing on kitchen joints
- Move toiletries away from the joint
- Stick to a soft cloth and a mild cleaner
Have a look at the joints every few months. Small splits and lifting ends are easy to catch early, and if anything looks wrong, just call 0345 464 0079 or email us.
Each shower pushes a little more water through a failed joint. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
About our bathroom resealing in Throwley
Kitchens need the same care as bathrooms. Worktop upstands, sink edges and splashback joints get wet every single day, and water behind a laminate worktop can make it swell. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. We work on sinks & splashbacks, basins & vanity units and shower trays & enclosures, and the jobs we see most are mouldy sealant that has gone black and new sealant laid over old sealant that is now lifting.
Around Throwley, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
Your job is guaranteed for a year, as with all our work.
- Place
- Throwley (ME13)
- Region
- Kent
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Different surfaces, different methods
Kitchen worktops & upstands
Water behind a laminate worktop can make the edge swell. A continuous bead along the back keeps water out, as long as the worktop itself is firmly fixed.
Baths
Acrylic baths flex the most, and even steel and cast iron baths settle slightly when full. Loading the bath with water before sealing allows for it.
For landlords and businesses
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will quote.
In hotels, rooms out of use cost money, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
What happens on the day
Every visit runs the same way: we look at the joints together, protect the area around them, do the work and tidy away. Most jobs take two to three hours for a typical bath, depending on how much old sealant there is. Somewhere as small as Throwley, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We cover the area around the joints we’re working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Keep pets and children clear of the area while we work
- Mention any parking rules near the property
Ask for a quote
Getting a quote is simple: tell us what needs doing and where. A few pictures by email make the job easier to understand, and we will take it from there.
Read more
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- A bath or tray that moves because it is not properly supported
- A tray or bath that’s cracked through
- Loose or hollow tiles, or failed tanking behind them
If you’re not sure, just ring 0345 464 0079 or email us and we will give you a straight answer before booking.
Where we work in Throwley
- Shower trays & enclosures
- Basins & vanity units
- Sinks & splashbacks
- Kitchen worktops & upstands
- Wet rooms
- Baths
DIY sealant or a professional job?
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Nearby places to Throwley
Other services in Throwley
Bathrooms and kitchens in Throwley
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Faversham station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. In the older streets around Church of St Michael and All Angels, walls and floors in older homes can move, and sealant and grout show it first.
Throwley is about 4 miles south of Faversham, in Kent. Every kind of property in Throwley can book us for bathroom resealing. Every job comes with our 12-month guarantee. Our Kent coverage runs to 922 places, and Throwley is one of them. Chelmsford is on our list too, about 36 miles from Throwley.
All of ME13 is within our area for bathroom resealing, from the main roads to the quietest streets. Other places close to Throwley include Throwley Forstal (1 mile south), Sheldwich (1 mile north-east), Badlesmere (1 mile east), Sheldwich Lees (1 mile east) and Eastling (2 miles north-west). Larger places within reach include Maidstone (14 miles west), Ashford (9 miles south), Canterbury (10 miles east), Sittingbourne (7 miles north-west), Whitstable (10 miles north-east) and Faversham (4 miles north).
Near you in Throwley
The nearest railway station is Faversham station, about 3.6 miles north-east of the centre. Nearby you will also find Newnham Castle (2.7 miles north-west).
Quotes for bathroom resealing in Throwley
Your quote is based on your job. We look at:
- How easy the joints are to reach
- The number and length of the joints
- The type of sealant required
- Working hours on commercial sites
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Helping us quote
What to tell us when you ask for a quote:
- Photos by email, if that’s easy
- Any previous sealing or DIY work
- What’s wrong with the joints now
- If it’s domestic, commercial or a hotel
For a quote, ring 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
Throwley questions
Is Throwley in your area for bathroom resealing?
Yes. We work across London and the South East, and Throwley is part of that. You can call 0345 464 0079 or email us and tell us what needs doing, and we’ll give you a clear price.
Do you cover smaller places like Throwley?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Which products do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done and you will get one quote.
Does the resealing come with a guarantee?
Yes. Every job carries our 12-month guarantee, and we are fully insured.
Are you ARBOMaster approved?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Where are you based?
Mr Mastic is based in Crawley. We cover Throwley and the rest of Kent, along with the rest of our area.
How long does it take to reseal a bath or shower?
That depends on the number of joints and the state of the old sealant. For most single baths or showers, allow a couple of hours.